~drizzle-trunk/drizzle/development

264.3.1 by Jay Pipes
* Added Doxyfile configuration for doxygen builds
1
# Doxyfile 1.5.5
2
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project
5
#
6
# All text after a hash (#) is considered a comment and will be ignored
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ")
12
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16
17
# This tag specifies the encoding used for all characters in the config file 
18
# that follow. The default is UTF-8 which is also the encoding used for all 
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the 
20
# iconv built into libc) for the transcoding. See 
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23
DOXYFILE_ENCODING      = UTF-8
24
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
26
# by quotes) that should identify the project.
27
28
PROJECT_NAME           = drizzle
29
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
31
# This could be handy for archiving the generated documentation or 
32
# if some version control system is used.
33
34
PROJECT_NUMBER         = 
35
36
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
37
# base path where the generated documentation will be put. 
38
# If a relative path is entered, it will be relative to the location 
39
# where doxygen was started. If left blank the current directory will be used.
40
1712.1.1 by Monty Taylor
Merged libdrizzle directly into tree.
41
OUTPUT_DIRECTORY       = docs/drizzled
264.3.1 by Jay Pipes
* Added Doxyfile configuration for doxygen builds
42
43
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
44
# 4096 sub-directories (in 2 levels) under the output directory of each output 
45
# format and will distribute the generated files over these directories. 
46
# Enabling this option can be useful when feeding doxygen a huge amount of 
47
# source files, where putting all generated files in the same directory would 
48
# otherwise cause performance problems for the file system.
49
50
CREATE_SUBDIRS         = YES
51
52
# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
53
# documentation generated by doxygen is written. Doxygen will use this 
54
# information to generate all constant output in the proper language. 
55
# The default language is English, other supported languages are: 
56
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
57
# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 
58
# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 
59
# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 
60
# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, 
61
# and Ukrainian.
62
63
OUTPUT_LANGUAGE        = English
64
65
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
66
# include brief member descriptions after the members that are listed in 
67
# the file and class documentation (similar to JavaDoc). 
68
# Set to NO to disable this.
69
70
BRIEF_MEMBER_DESC      = YES
71
72
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
73
# the brief description of a member or function before the detailed description. 
74
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
75
# brief descriptions will be completely suppressed.
76
77
REPEAT_BRIEF           = YES
78
79
# This tag implements a quasi-intelligent brief description abbreviator 
80
# that is used to form the text in various listings. Each string 
81
# in this list, if found as the leading text of the brief description, will be 
82
# stripped from the text and the result after processing the whole list, is 
83
# used as the annotated text. Otherwise, the brief description is used as-is. 
84
# If left blank, the following values are used ("$name" is automatically 
85
# replaced with the name of the entity): "The $name class" "The $name widget" 
86
# "The $name file" "is" "provides" "specifies" "contains" 
87
# "represents" "a" "an" "the"
88
89
ABBREVIATE_BRIEF       = YES
90
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
92
# Doxygen will generate a detailed section even if there is only a brief 
93
# description.
94
95
ALWAYS_DETAILED_SEC    = NO
96
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
98
# inherited members of a class in the documentation of that class as if those 
99
# members were ordinary class members. Constructors, destructors and assignment 
100
# operators of the base classes will not be shown.
101
102
INLINE_INHERITED_MEMB  = YES
103
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
105
# path before files name in the file list and in the header files. If set 
106
# to NO the shortest path that makes the file name unique will be used.
107
108
FULL_PATH_NAMES        = YES
109
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
111
# can be used to strip a user-defined part of the path. Stripping is 
112
# only done if one of the specified strings matches the left-hand part of 
113
# the path. The tag can be used to show relative paths in the file list. 
114
# If left blank the directory from which doxygen is run is used as the 
115
# path to strip.
116
117
STRIP_FROM_PATH        = 
118
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
120
# the path mentioned in the documentation of a class, which tells 
121
# the reader which header file to include in order to use a class. 
122
# If left blank only the name of the header file containing the class 
123
# definition is used. Otherwise one should specify the include paths that 
124
# are normally passed to the compiler using the -I flag.
125
126
STRIP_FROM_INC_PATH    = 
127
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
129
# (but less readable) file names. This can be useful is your file systems 
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
131
132
SHORT_NAMES            = NO
133
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
135
# will interpret the first line (until the first dot) of a JavaDoc-style 
136
# comment as the brief description. If set to NO, the JavaDoc 
137
# comments will behave just like regular Qt-style comments 
138
# (thus requiring an explicit @brief command for a brief description.)
139
140
JAVADOC_AUTOBRIEF      = NO
141
142
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
143
# interpret the first line (until the first dot) of a Qt-style 
144
# comment as the brief description. If set to NO, the comments 
145
# will behave just like regular Qt-style comments (thus requiring 
146
# an explicit \brief command for a brief description.)
147
148
QT_AUTOBRIEF           = NO
149
150
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
151
# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
152
# comments) as a brief description. This used to be the default behaviour. 
153
# The new default is to treat a multi-line C++ comment block as a detailed 
154
# description. Set this tag to YES if you prefer the old behaviour instead.
155
156
MULTILINE_CPP_IS_BRIEF = NO
157
158
# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
159
# will output the detailed description near the top, like JavaDoc.
160
# If set to NO, the detailed description appears after the member 
161
# documentation.
162
163
DETAILS_AT_TOP         = NO
164
165
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
166
# member inherits the documentation from any documented member that it 
167
# re-implements.
168
169
INHERIT_DOCS           = YES
170
171
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
172
# a new page for each member. If set to NO, the documentation of a member will 
173
# be part of the file/class/namespace that contains it.
174
175
SEPARATE_MEMBER_PAGES  = NO
176
177
# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
178
# Doxygen uses this value to replace tabs by spaces in code fragments.
179
180
TAB_SIZE               = 2
181
182
# This tag can be used to specify a number of aliases that acts 
183
# as commands in the documentation. An alias has the form "name=value". 
184
# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
185
# put the command \sideeffect (or @sideeffect) in the documentation, which 
186
# will result in a user-defined paragraph with heading "Side Effects:". 
187
# You can put \n's in the value part of an alias to insert newlines.
188
189
ALIASES                = 
190
191
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
192
# sources only. Doxygen will then generate output that is more tailored for C. 
193
# For instance, some of the names that are used will be different. The list 
194
# of all members will be omitted, etc.
195
196
OPTIMIZE_OUTPUT_FOR_C  = NO
197
198
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
199
# sources only. Doxygen will then generate output that is more tailored for 
200
# Java. For instance, namespaces will be presented as packages, qualified 
201
# scopes will look different, etc.
202
203
OPTIMIZE_OUTPUT_JAVA   = NO
204
205
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
206
# sources only. Doxygen will then generate output that is more tailored for 
207
# Fortran.
208
209
OPTIMIZE_FOR_FORTRAN   = NO
210
211
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
212
# sources. Doxygen will then generate output that is tailored for 
213
# VHDL.
214
215
OPTIMIZE_OUTPUT_VHDL   = NO
216
217
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
218
# to include (a tag file for) the STL sources as input, then you should 
219
# set this tag to YES in order to let doxygen match functions declarations and 
220
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
221
# func(std::string) {}). This also make the inheritance and collaboration 
222
# diagrams that involve STL classes more complete and accurate.
223
224
BUILTIN_STL_SUPPORT    = NO
225
226
# If you use Microsoft's C++/CLI language, you should set this option to YES to
227
# enable parsing support.
228
229
CPP_CLI_SUPPORT        = NO
230
231
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
232
# Doxygen will parse them like normal C++ but will assume all classes use public 
233
# instead of private inheritance when no explicit protection keyword is present.
234
235
SIP_SUPPORT            = NO
236
237
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
238
# tag is set to YES, then doxygen will reuse the documentation of the first 
239
# member in the group (if any) for the other members of the group. By default 
240
# all members of a group must be documented explicitly.
241
242
DISTRIBUTE_GROUP_DOC   = NO
243
244
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
245
# the same type (for instance a group of public functions) to be put as a 
246
# subgroup of that type (e.g. under the Public Functions section). Set it to 
247
# NO to prevent subgrouping. Alternatively, this can be done per class using 
248
# the \nosubgrouping command.
249
250
SUBGROUPING            = YES
251
252
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
253
# is documented as struct, union, or enum with the name of the typedef. So 
254
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
255
# with name TypeT. When disabled the typedef will appear as a member of a file, 
256
# namespace, or class. And the struct will be named TypeS. This can typically 
257
# be useful for C code in case the coding convention dictates that all compound 
258
# types are typedef'ed and only the typedef is referenced, never the tag name.
259
260
TYPEDEF_HIDES_STRUCT   = NO
261
262
#---------------------------------------------------------------------------
263
# Build related configuration options
264
#---------------------------------------------------------------------------
265
266
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
267
# documentation are documented, even if no documentation was available. 
268
# Private class members and static file members will be hidden unless 
269
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
270
271
EXTRACT_ALL            = NO
272
273
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
274
# will be included in the documentation.
275
276
EXTRACT_PRIVATE        = YES
277
278
# If the EXTRACT_STATIC tag is set to YES all static members of a file 
279
# will be included in the documentation.
280
281
EXTRACT_STATIC         = YES
282
283
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
284
# defined locally in source files will be included in the documentation. 
285
# If set to NO only classes defined in header files are included.
286
287
EXTRACT_LOCAL_CLASSES  = YES
288
289
# This flag is only useful for Objective-C code. When set to YES local 
290
# methods, which are defined in the implementation section but not in 
291
# the interface are included in the documentation. 
292
# If set to NO (the default) only methods in the interface are included.
293
294
EXTRACT_LOCAL_METHODS  = NO
295
296
# If this flag is set to YES, the members of anonymous namespaces will be 
297
# extracted and appear in the documentation as a namespace called 
298
# 'anonymous_namespace{file}', where file will be replaced with the base 
299
# name of the file that contains the anonymous namespace. By default 
300
# anonymous namespace are hidden.
301
302
EXTRACT_ANON_NSPACES   = NO
303
304
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
305
# undocumented members of documented classes, files or namespaces. 
306
# If set to NO (the default) these members will be included in the 
307
# various overviews, but no documentation section is generated. 
308
# This option has no effect if EXTRACT_ALL is enabled.
309
310
HIDE_UNDOC_MEMBERS     = NO
311
312
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
313
# undocumented classes that are normally visible in the class hierarchy. 
314
# If set to NO (the default) these classes will be included in the various 
315
# overviews. This option has no effect if EXTRACT_ALL is enabled.
316
317
HIDE_UNDOC_CLASSES     = NO
318
319
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
320
# friend (class|struct|union) declarations. 
321
# If set to NO (the default) these declarations will be included in the 
322
# documentation.
323
324
HIDE_FRIEND_COMPOUNDS  = NO
325
326
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
327
# documentation blocks found inside the body of a function. 
328
# If set to NO (the default) these blocks will be appended to the 
329
# function's detailed documentation block.
330
331
HIDE_IN_BODY_DOCS      = NO
332
333
# The INTERNAL_DOCS tag determines if documentation 
334
# that is typed after a \internal command is included. If the tag is set 
335
# to NO (the default) then the documentation will be excluded. 
336
# Set it to YES to include the internal documentation.
337
338
INTERNAL_DOCS          = NO
339
340
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
341
# file names in lower-case letters. If set to YES upper-case letters are also 
342
# allowed. This is useful if you have classes or files whose names only differ 
343
# in case and if your file system supports case sensitive file names. Windows 
344
# and Mac users are advised to set this option to NO.
345
346
CASE_SENSE_NAMES       = YES
347
348
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
349
# will show members with their full class and namespace scopes in the 
350
# documentation. If set to YES the scope will be hidden.
351
352
HIDE_SCOPE_NAMES       = NO
353
354
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
355
# will put a list of the files that are included by a file in the documentation 
356
# of that file.
357
358
SHOW_INCLUDE_FILES     = YES
359
360
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
361
# is inserted in the documentation for inline members.
362
363
INLINE_INFO            = YES
364
365
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
366
# will sort the (detailed) documentation of file and class members 
367
# alphabetically by member name. If set to NO the members will appear in 
368
# declaration order.
369
370
SORT_MEMBER_DOCS       = YES
371
372
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
373
# brief documentation of file, namespace and class members alphabetically 
374
# by member name. If set to NO (the default) the members will appear in 
375
# declaration order.
376
377
SORT_BRIEF_DOCS        = NO
378
379
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
380
# hierarchy of group names into alphabetical order. If set to NO (the default) 
381
# the group names will appear in their defined order.
382
383
SORT_GROUP_NAMES       = NO
384
385
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
386
# sorted by fully-qualified names, including namespaces. If set to 
387
# NO (the default), the class list will be sorted only by class name, 
388
# not including the namespace part. 
389
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
390
# Note: This option applies only to the class list, not to the 
391
# alphabetical list.
392
393
SORT_BY_SCOPE_NAME     = NO
394
395
# The GENERATE_TODOLIST tag can be used to enable (YES) or 
396
# disable (NO) the todo list. This list is created by putting \todo 
397
# commands in the documentation.
398
399
GENERATE_TODOLIST      = YES
400
401
# The GENERATE_TESTLIST tag can be used to enable (YES) or 
402
# disable (NO) the test list. This list is created by putting \test 
403
# commands in the documentation.
404
405
GENERATE_TESTLIST      = YES
406
407
# The GENERATE_BUGLIST tag can be used to enable (YES) or 
408
# disable (NO) the bug list. This list is created by putting \bug 
409
# commands in the documentation.
410
411
GENERATE_BUGLIST       = YES
412
413
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
414
# disable (NO) the deprecated list. This list is created by putting 
415
# \deprecated commands in the documentation.
416
417
GENERATE_DEPRECATEDLIST= YES
418
419
# The ENABLED_SECTIONS tag can be used to enable conditional 
420
# documentation sections, marked by \if sectionname ... \endif.
421
422
ENABLED_SECTIONS       = 
423
424
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
425
# the initial value of a variable or define consists of for it to appear in 
426
# the documentation. If the initializer consists of more lines than specified 
427
# here it will be hidden. Use a value of 0 to hide initializers completely. 
428
# The appearance of the initializer of individual variables and defines in the 
429
# documentation can be controlled using \showinitializer or \hideinitializer 
430
# command in the documentation regardless of this setting.
431
432
MAX_INITIALIZER_LINES  = 30
433
434
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
435
# at the bottom of the documentation of classes and structs. If set to YES the 
436
# list will mention the files that were used to generate the documentation.
437
438
SHOW_USED_FILES        = YES
439
440
# If the sources in your project are distributed over multiple directories 
441
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
442
# in the documentation. The default is NO.
443
444
SHOW_DIRECTORIES       = YES
445
446
# The FILE_VERSION_FILTER tag can be used to specify a program or script that 
447
# doxygen should invoke to get the current version for each file (typically from 
448
# the version control system). Doxygen will invoke the program by executing (via 
449
# popen()) the command <command> <input-file>, where <command> is the value of 
450
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
451
# provided by doxygen. Whatever the program writes to standard output 
452
# is used as the file version. See the manual for examples.
453
454
FILE_VERSION_FILTER    = 
455
456
#---------------------------------------------------------------------------
457
# configuration options related to warning and progress messages
458
#---------------------------------------------------------------------------
459
460
# The QUIET tag can be used to turn on/off the messages that are generated 
461
# by doxygen. Possible values are YES and NO. If left blank NO is used.
462
463
QUIET                  = NO
464
465
# The WARNINGS tag can be used to turn on/off the warning messages that are 
466
# generated by doxygen. Possible values are YES and NO. If left blank 
467
# NO is used.
468
469
WARNINGS               = YES
470
471
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
472
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
473
# automatically be disabled.
474
475
WARN_IF_UNDOCUMENTED   = YES
476
477
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
478
# potential errors in the documentation, such as not documenting some 
479
# parameters in a documented function, or documenting parameters that 
480
# don't exist or using markup commands wrongly.
481
482
WARN_IF_DOC_ERROR      = YES
483
484
# This WARN_NO_PARAMDOC option can be abled to get warnings for 
485
# functions that are documented, but have no documentation for their parameters 
486
# or return value. If set to NO (the default) doxygen will only warn about 
487
# wrong or incomplete parameter documentation, but not about the absence of 
488
# documentation.
489
490
WARN_NO_PARAMDOC       = NO
491
492
# The WARN_FORMAT tag determines the format of the warning messages that 
493
# doxygen can produce. The string should contain the $file, $line, and $text 
494
# tags, which will be replaced by the file and line number from which the 
495
# warning originated and the warning text. Optionally the format may contain 
496
# $version, which will be replaced by the version of the file (if it could 
497
# be obtained via FILE_VERSION_FILTER)
498
499
WARN_FORMAT            = "$file:$line: $text"
500
501
# The WARN_LOGFILE tag can be used to specify a file to which warning 
502
# and error messages should be written. If left blank the output is written 
503
# to stderr.
504
505
WARN_LOGFILE           = doxerr.log
506
507
#---------------------------------------------------------------------------
508
# configuration options related to the input files
509
#---------------------------------------------------------------------------
510
511
# The INPUT tag can be used to specify the files and/or directories that contain 
512
# documented source files. You may enter file names like "myfile.cpp" or 
513
# directories like "/usr/src/myproject". Separate the files or directories 
514
# with spaces.
515
516
INPUT                  = storage drizzled client libdrizzle plugin vio mysys mystrings
517
518
# This tag can be used to specify the character encoding of the source files 
519
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
520
# also the default input encoding. Doxygen uses libiconv (or the iconv built 
521
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
522
# the list of possible encodings.
523
524
INPUT_ENCODING         = UTF-8
525
526
# If the value of the INPUT tag contains directories, you can use the 
527
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
528
# and *.h) to filter out the source-files in the directories. If left 
529
# blank the following patterns are tested: 
530
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
531
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
532
533
FILE_PATTERNS          = 
534
535
# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
536
# should be searched for input files as well. Possible values are YES and NO. 
537
# If left blank NO is used.
538
539
RECURSIVE              = YES
540
541
# The EXCLUDE tag can be used to specify files and/or directories that should 
542
# excluded from the INPUT source files. This way you can easily exclude a 
543
# subdirectory from a directory tree whose root is specified with the INPUT tag.
544
545
EXCLUDE                = 
546
547
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
548
# directories that are symbolic links (a Unix filesystem feature) are excluded 
549
# from the input.
550
551
EXCLUDE_SYMLINKS       = NO
552
553
# If the value of the INPUT tag contains directories, you can use the 
554
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
555
# certain files from those directories. Note that the wildcards are matched 
556
# against the file with absolute path, so to exclude all test directories 
557
# for example use the pattern */test/*
558
559
EXCLUDE_PATTERNS       = .bzr* *.swp *~
560
561
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
562
# (namespaces, classes, functions, etc.) that should be excluded from the 
563
# output. The symbol name can be a fully qualified name, a word, or if the 
564
# wildcard * is used, a substring. Examples: ANamespace, AClass, 
565
# AClass::ANamespace, ANamespace::*Test
566
567
EXCLUDE_SYMBOLS        = 
568
569
# The EXAMPLE_PATH tag can be used to specify one or more files or 
570
# directories that contain example code fragments that are included (see 
571
# the \include command).
572
573
EXAMPLE_PATH           = 
574
575
# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
576
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
577
# and *.h) to filter out the source-files in the directories. If left 
578
# blank all files are included.
579
580
EXAMPLE_PATTERNS       = 
581
582
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
583
# searched for input files to be used with the \include or \dontinclude 
584
# commands irrespective of the value of the RECURSIVE tag. 
585
# Possible values are YES and NO. If left blank NO is used.
586
587
EXAMPLE_RECURSIVE      = NO
588
589
# The IMAGE_PATH tag can be used to specify one or more files or 
590
# directories that contain image that are included in the documentation (see 
591
# the \image command).
592
593
IMAGE_PATH             = 
594
595
# The INPUT_FILTER tag can be used to specify a program that doxygen should 
596
# invoke to filter for each input file. Doxygen will invoke the filter program 
597
# by executing (via popen()) the command <filter> <input-file>, where <filter> 
598
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
599
# input file. Doxygen will then use the output that the filter program writes 
600
# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
601
# ignored.
602
603
INPUT_FILTER           = 
604
605
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
606
# basis.  Doxygen will compare the file name with each pattern and apply the 
607
# filter if there is a match.  The filters are a list of the form: 
608
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
609
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
610
# is applied to all files.
611
612
FILTER_PATTERNS        = 
613
614
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
615
# INPUT_FILTER) will be used to filter the input files when producing source 
616
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
617
618
FILTER_SOURCE_FILES    = NO
619
620
#---------------------------------------------------------------------------
621
# configuration options related to source browsing
622
#---------------------------------------------------------------------------
623
624
# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
625
# be generated. Documented entities will be cross-referenced with these sources. 
626
# Note: To get rid of all source code in the generated output, make sure also 
627
# VERBATIM_HEADERS is set to NO.
628
629
SOURCE_BROWSER         = YES
630
631
# Setting the INLINE_SOURCES tag to YES will include the body 
632
# of functions and classes directly in the documentation.
633
634
INLINE_SOURCES         = NO
635
636
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
637
# doxygen to hide any special comment blocks from generated source code 
638
# fragments. Normal C and C++ comments will always remain visible.
639
640
STRIP_CODE_COMMENTS    = YES
641
642
# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
643
# then for each documented function all documented 
644
# functions referencing it will be listed.
645
646
REFERENCED_BY_RELATION = YES
647
648
# If the REFERENCES_RELATION tag is set to YES (the default) 
649
# then for each documented function all documented entities 
650
# called/used by that function will be listed.
651
652
REFERENCES_RELATION    = YES
653
654
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
655
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
656
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
657
# link to the source code.  Otherwise they will link to the documentstion.
658
659
REFERENCES_LINK_SOURCE = YES
660
661
# If the USE_HTAGS tag is set to YES then the references to source code 
662
# will point to the HTML generated by the htags(1) tool instead of doxygen 
663
# built-in source browser. The htags tool is part of GNU's global source 
664
# tagging system (see http://www.gnu.org/software/global/global.html). You 
665
# will need version 4.8.6 or higher.
666
667
USE_HTAGS              = NO
668
669
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
670
# will generate a verbatim copy of the header file for each class for 
671
# which an include is specified. Set to NO to disable this.
672
673
VERBATIM_HEADERS       = NO
674
675
#---------------------------------------------------------------------------
676
# configuration options related to the alphabetical class index
677
#---------------------------------------------------------------------------
678
679
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
680
# of all compounds will be generated. Enable this if the project 
681
# contains a lot of classes, structs, unions or interfaces.
682
683
ALPHABETICAL_INDEX     = YES
684
685
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
686
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
687
# in which this list will be split (can be a number in the range [1..20])
688
689
COLS_IN_ALPHA_INDEX    = 6
690
691
# In case all classes in a project start with a common prefix, all 
692
# classes will be put under the same header in the alphabetical index. 
693
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
694
# should be ignored while generating the index headers.
695
696
IGNORE_PREFIX          = 
697
698
#---------------------------------------------------------------------------
699
# configuration options related to the HTML output
700
#---------------------------------------------------------------------------
701
702
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
703
# generate HTML output.
704
705
GENERATE_HTML          = YES
706
707
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
708
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
709
# put in front of it. If left blank `html' will be used as the default path.
710
711
HTML_OUTPUT            = html
712
713
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
714
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
715
# doxygen will generate files with .html extension.
716
717
HTML_FILE_EXTENSION    = .html
718
719
# The HTML_HEADER tag can be used to specify a personal HTML header for 
720
# each generated HTML page. If it is left blank doxygen will generate a 
721
# standard header.
722
1712.1.1 by Monty Taylor
Merged libdrizzle directly into tree.
723
HTML_HEADER            = docs/drizzled_header.html
264.3.1 by Jay Pipes
* Added Doxyfile configuration for doxygen builds
724
725
# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
726
# each generated HTML page. If it is left blank doxygen will generate a 
727
# standard footer.
728
729
HTML_FOOTER            = 
730
731
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
732
# style sheet that is used by each HTML page. It can be used to 
733
# fine-tune the look of the HTML output. If the tag is left blank doxygen 
734
# will generate a default style sheet. Note that doxygen will try to copy 
735
# the style sheet file to the HTML output directory, so don't put your own 
736
# stylesheet in the HTML output directory as well, or it will be erased!
737
738
HTML_STYLESHEET        = 
739
740
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
741
# files or namespaces will be aligned in HTML using tables. If set to 
742
# NO a bullet list will be used.
743
744
HTML_ALIGN_MEMBERS     = YES
745
746
# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
747
# will be generated that can be used as input for tools like the 
748
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
749
# of the generated HTML documentation.
750
751
GENERATE_HTMLHELP      = NO
752
753
# If the GENERATE_DOCSET tag is set to YES, additional index files 
754
# will be generated that can be used as input for Apple's Xcode 3 
755
# integrated development environment, introduced with OSX 10.5 (Leopard). 
756
# To create a documentation set, doxygen will generate a Makefile in the 
757
# HTML output directory. Running make will produce the docset in that 
758
# directory and running "make install" will install the docset in 
759
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
760
# it at startup.
761
762
GENERATE_DOCSET        = NO
763
764
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
765
# feed. A documentation feed provides an umbrella under which multiple 
766
# documentation sets from a single provider (such as a company or product suite) 
767
# can be grouped.
768
769
DOCSET_FEEDNAME        = "Doxygen generated docs"
770
771
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
772
# should uniquely identify the documentation set bundle. This should be a 
773
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
774
# will append .docset to the name.
775
776
DOCSET_BUNDLE_ID       = org.doxygen.Project
777
778
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
779
# documentation will contain sections that can be hidden and shown after the 
780
# page has loaded. For this to work a browser that supports 
781
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
782
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
783
784
HTML_DYNAMIC_SECTIONS  = NO
785
786
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
787
# be used to specify the file name of the resulting .chm file. You 
788
# can add a path in front of the file if the result should not be 
789
# written to the html output directory.
790
791
CHM_FILE               = 
792
793
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
794
# be used to specify the location (absolute path including file name) of 
795
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
796
# the HTML help compiler on the generated index.hhp.
797
798
HHC_LOCATION           = 
799
800
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
801
# controls if a separate .chi index file is generated (YES) or that 
802
# it should be included in the master .chm file (NO).
803
804
GENERATE_CHI           = NO
805
806
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
807
# controls whether a binary table of contents is generated (YES) or a 
808
# normal table of contents (NO) in the .chm file.
809
810
BINARY_TOC             = NO
811
812
# The TOC_EXPAND flag can be set to YES to add extra items for group members 
813
# to the contents of the HTML help documentation and to the tree view.
814
815
TOC_EXPAND             = NO
816
817
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
818
# top of each HTML page. The value NO (the default) enables the index and 
819
# the value YES disables it.
820
821
DISABLE_INDEX          = NO
822
823
# This tag can be used to set the number of enum values (range [1..20]) 
824
# that doxygen will group on one line in the generated HTML documentation.
825
826
ENUM_VALUES_PER_LINE   = 4
827
828
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
829
# generated containing a tree-like index structure (just like the one that 
830
# is generated for HTML Help). For this to work a browser that supports 
831
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
832
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
833
# probably better off using the HTML help feature.
834
835
GENERATE_TREEVIEW      = YES
836
837
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
838
# used to set the initial width (in pixels) of the frame in which the tree 
839
# is shown.
840
841
TREEVIEW_WIDTH         = 350
842
843
#---------------------------------------------------------------------------
844
# configuration options related to the LaTeX output
845
#---------------------------------------------------------------------------
846
847
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
848
# generate Latex output.
849
850
GENERATE_LATEX         = NO
851
852
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
853
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
854
# put in front of it. If left blank `latex' will be used as the default path.
855
856
LATEX_OUTPUT           = latex
857
858
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
859
# invoked. If left blank `latex' will be used as the default command name.
860
861
LATEX_CMD_NAME         = latex
862
863
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
864
# generate index for LaTeX. If left blank `makeindex' will be used as the 
865
# default command name.
866
867
MAKEINDEX_CMD_NAME     = makeindex
868
869
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
870
# LaTeX documents. This may be useful for small projects and may help to 
871
# save some trees in general.
872
873
COMPACT_LATEX          = NO
874
875
# The PAPER_TYPE tag can be used to set the paper type that is used 
876
# by the printer. Possible values are: a4, a4wide, letter, legal and 
877
# executive. If left blank a4wide will be used.
878
879
PAPER_TYPE             = a4wide
880
881
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
882
# packages that should be included in the LaTeX output.
883
884
EXTRA_PACKAGES         = 
885
886
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
887
# the generated latex document. The header should contain everything until 
888
# the first chapter. If it is left blank doxygen will generate a 
889
# standard header. Notice: only use this tag if you know what you are doing!
890
891
LATEX_HEADER           = 
892
893
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
894
# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
895
# contain links (just like the HTML output) instead of page references 
896
# This makes the output suitable for online browsing using a pdf viewer.
897
898
PDF_HYPERLINKS         = YES
899
900
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
901
# plain latex in the generated Makefile. Set this option to YES to get a 
902
# higher quality PDF documentation.
903
904
USE_PDFLATEX           = YES
905
906
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
907
# command to the generated LaTeX files. This will instruct LaTeX to keep 
908
# running if errors occur, instead of asking the user for help. 
909
# This option is also used when generating formulas in HTML.
910
911
LATEX_BATCHMODE        = NO
912
913
# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
914
# include the index chapters (such as File Index, Compound Index, etc.) 
915
# in the output.
916
917
LATEX_HIDE_INDICES     = NO
918
919
#---------------------------------------------------------------------------
920
# configuration options related to the RTF output
921
#---------------------------------------------------------------------------
922
923
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
924
# The RTF output is optimized for Word 97 and may not look very pretty with 
925
# other RTF readers or editors.
926
927
GENERATE_RTF           = NO
928
929
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
930
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
931
# put in front of it. If left blank `rtf' will be used as the default path.
932
933
RTF_OUTPUT             = rtf
934
935
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
936
# RTF documents. This may be useful for small projects and may help to 
937
# save some trees in general.
938
939
COMPACT_RTF            = NO
940
941
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
942
# will contain hyperlink fields. The RTF file will 
943
# contain links (just like the HTML output) instead of page references. 
944
# This makes the output suitable for online browsing using WORD or other 
945
# programs which support those fields. 
946
# Note: wordpad (write) and others do not support links.
947
948
RTF_HYPERLINKS         = NO
949
950
# Load stylesheet definitions from file. Syntax is similar to doxygen's 
951
# config file, i.e. a series of assignments. You only have to provide 
952
# replacements, missing definitions are set to their default value.
953
954
RTF_STYLESHEET_FILE    = 
955
956
# Set optional variables used in the generation of an rtf document. 
957
# Syntax is similar to doxygen's config file.
958
959
RTF_EXTENSIONS_FILE    = 
960
961
#---------------------------------------------------------------------------
962
# configuration options related to the man page output
963
#---------------------------------------------------------------------------
964
965
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
966
# generate man pages
967
968
GENERATE_MAN           = NO
969
970
# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
971
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
972
# put in front of it. If left blank `man' will be used as the default path.
973
974
MAN_OUTPUT             = man
975
976
# The MAN_EXTENSION tag determines the extension that is added to 
977
# the generated man pages (default is the subroutine's section .3)
978
979
MAN_EXTENSION          = .3
980
981
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
982
# then it will generate one additional man file for each entity 
983
# documented in the real man page(s). These additional files 
984
# only source the real man page, but without them the man command 
985
# would be unable to find the correct page. The default is NO.
986
987
MAN_LINKS              = NO
988
989
#---------------------------------------------------------------------------
990
# configuration options related to the XML output
991
#---------------------------------------------------------------------------
992
993
# If the GENERATE_XML tag is set to YES Doxygen will 
994
# generate an XML file that captures the structure of 
995
# the code including all documentation.
996
997
GENERATE_XML           = NO
998
999
# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
1000
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
1001
# put in front of it. If left blank `xml' will be used as the default path.
1002
1003
XML_OUTPUT             = xml
1004
1005
# The XML_SCHEMA tag can be used to specify an XML schema, 
1006
# which can be used by a validating XML parser to check the 
1007
# syntax of the XML files.
1008
1009
XML_SCHEMA             = 
1010
1011
# The XML_DTD tag can be used to specify an XML DTD, 
1012
# which can be used by a validating XML parser to check the 
1013
# syntax of the XML files.
1014
1015
XML_DTD                = 
1016
1017
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
1018
# dump the program listings (including syntax highlighting 
1019
# and cross-referencing information) to the XML output. Note that 
1020
# enabling this will significantly increase the size of the XML output.
1021
1022
XML_PROGRAMLISTING     = YES
1023
1024
#---------------------------------------------------------------------------
1025
# configuration options for the AutoGen Definitions output
1026
#---------------------------------------------------------------------------
1027
1028
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
1029
# generate an AutoGen Definitions (see autogen.sf.net) file 
1030
# that captures the structure of the code including all 
1031
# documentation. Note that this feature is still experimental 
1032
# and incomplete at the moment.
1033
1034
GENERATE_AUTOGEN_DEF   = NO
1035
1036
#---------------------------------------------------------------------------
1037
# configuration options related to the Perl module output
1038
#---------------------------------------------------------------------------
1039
1040
# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
1041
# generate a Perl module file that captures the structure of 
1042
# the code including all documentation. Note that this 
1043
# feature is still experimental and incomplete at the 
1044
# moment.
1045
1046
GENERATE_PERLMOD       = NO
1047
1048
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
1049
# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
1050
# to generate PDF and DVI output from the Perl module output.
1051
1052
PERLMOD_LATEX          = NO
1053
1054
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
1055
# nicely formatted so it can be parsed by a human reader.  This is useful 
1056
# if you want to understand what is going on.  On the other hand, if this 
1057
# tag is set to NO the size of the Perl module output will be much smaller 
1058
# and Perl will parse it just the same.
1059
1060
PERLMOD_PRETTY         = YES
1061
1062
# The names of the make variables in the generated doxyrules.make file 
1063
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
1064
# This is useful so different doxyrules.make files included by the same 
1065
# Makefile don't overwrite each other's variables.
1066
1067
PERLMOD_MAKEVAR_PREFIX = 
1068
1069
#---------------------------------------------------------------------------
1070
# Configuration options related to the preprocessor   
1071
#---------------------------------------------------------------------------
1072
1073
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
1074
# evaluate all C-preprocessor directives found in the sources and include 
1075
# files.
1076
1077
ENABLE_PREPROCESSING   = YES
1078
1079
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
1080
# names in the source code. If set to NO (the default) only conditional 
1081
# compilation will be performed. Macro expansion can be done in a controlled 
1082
# way by setting EXPAND_ONLY_PREDEF to YES.
1083
1084
MACRO_EXPANSION        = NO
1085
1086
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
1087
# then the macro expansion is limited to the macros specified with the 
1088
# PREDEFINED and EXPAND_AS_DEFINED tags.
1089
1090
EXPAND_ONLY_PREDEF     = NO
1091
1092
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
1093
# in the INCLUDE_PATH (see below) will be search if a #include is found.
1094
1095
SEARCH_INCLUDES        = YES
1096
1097
# The INCLUDE_PATH tag can be used to specify one or more directories that 
1098
# contain include files that are not input files but should be processed by 
1099
# the preprocessor.
1100
1101
INCLUDE_PATH           = 
1102
1103
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
1104
# patterns (like *.h and *.hpp) to filter out the header-files in the 
1105
# directories. If left blank, the patterns specified with FILE_PATTERNS will 
1106
# be used.
1107
1108
INCLUDE_FILE_PATTERNS  = 
1109
1110
# The PREDEFINED tag can be used to specify one or more macro names that 
1111
# are defined before the preprocessor is started (similar to the -D option of 
1112
# gcc). The argument of the tag is a list of macros of the form: name 
1113
# or name=definition (no spaces). If the definition and the = are 
1114
# omitted =1 is assumed. To prevent a macro definition from being 
1115
# undefined via #undef or recursively expanded use the := operator 
1116
# instead of the = operator.
1117
1118
PREDEFINED             = 
1119
1120
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
1121
# this tag can be used to specify a list of macro names that should be expanded. 
1122
# The macro definition that is found in the sources will be used. 
1123
# Use the PREDEFINED tag if you want to use a different macro definition.
1124
1125
EXPAND_AS_DEFINED      = 
1126
1127
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
1128
# doxygen's preprocessor will remove all function-like macros that are alone 
1129
# on a line, have an all uppercase name, and do not end with a semicolon. Such 
1130
# function macros are typically used for boiler-plate code, and will confuse 
1131
# the parser if not removed.
1132
1133
SKIP_FUNCTION_MACROS   = YES
1134
1135
#---------------------------------------------------------------------------
1136
# Configuration::additions related to external references   
1137
#---------------------------------------------------------------------------
1138
1139
# The TAGFILES option can be used to specify one or more tagfiles. 
1140
# Optionally an initial location of the external documentation 
1141
# can be added for each tagfile. The format of a tag file without 
1142
# this location is as follows: 
1143
#   TAGFILES = file1 file2 ... 
1144
# Adding location for the tag files is done as follows: 
1145
#   TAGFILES = file1=loc1 "file2 = loc2" ... 
1146
# where "loc1" and "loc2" can be relative or absolute paths or 
1147
# URLs. If a location is present for each tag, the installdox tool 
1148
# does not have to be run to correct the links.
1149
# Note that each tag file must have a unique name
1150
# (where the name does NOT include the path)
1151
# If a tag file is not located in the directory in which doxygen 
1152
# is run, you must also specify the path to the tagfile here.
1153
1154
TAGFILES               = 
1155
1156
# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
1157
# a tag file that is based on the input files it reads.
1158
1159
GENERATE_TAGFILE       = 
1160
1161
# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
1162
# in the class index. If set to NO only the inherited external classes 
1163
# will be listed.
1164
1165
ALLEXTERNALS           = NO
1166
1167
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
1168
# in the modules index. If set to NO, only the current project's groups will 
1169
# be listed.
1170
1171
EXTERNAL_GROUPS        = YES
1172
1173
# The PERL_PATH should be the absolute path and name of the perl script 
1174
# interpreter (i.e. the result of `which perl').
1175
1176
PERL_PATH              = /usr/bin/perl
1177
1178
#---------------------------------------------------------------------------
1179
# Configuration options related to the dot tool   
1180
#---------------------------------------------------------------------------
1181
1182
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
1183
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
1184
# or super classes. Setting the tag to NO turns the diagrams off. Note that 
1185
# this option is superseded by the HAVE_DOT option below. This is only a 
1186
# fallback. It is recommended to install and use dot, since it yields more 
1187
# powerful graphs.
1188
1189
CLASS_DIAGRAMS         = YES
1190
1191
# You can define message sequence charts within doxygen comments using the \msc 
1192
# command. Doxygen will then run the mscgen tool (see 
1193
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
1194
# documentation. The MSCGEN_PATH tag allows you to specify the directory where 
1195
# the mscgen tool resides. If left empty the tool is assumed to be found in the 
1196
# default search path.
1197
1198
MSCGEN_PATH            = 
1199
1200
# If set to YES, the inheritance and collaboration graphs will hide 
1201
# inheritance and usage relations if the target is undocumented 
1202
# or is not a class.
1203
1204
HIDE_UNDOC_RELATIONS   = YES
1205
1206
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
1207
# available from the path. This tool is part of Graphviz, a graph visualization 
1208
# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
1209
# have no effect if this option is set to NO (the default)
1210
1723.1.2 by Monty Taylor
Fix doxygen config.
1211
HAVE_DOT               = NO
264.3.1 by Jay Pipes
* Added Doxyfile configuration for doxygen builds
1212
1213
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
1214
# will generate a graph for each documented class showing the direct and 
1215
# indirect inheritance relations. Setting this tag to YES will force the 
1216
# the CLASS_DIAGRAMS tag to NO.
1217
1218
CLASS_GRAPH            = YES
1219
1220
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
1221
# will generate a graph for each documented class showing the direct and 
1222
# indirect implementation dependencies (inheritance, containment, and 
1223
# class references variables) of the class with other documented classes.
1224
1225
COLLABORATION_GRAPH    = YES
1226
1227
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
1228
# will generate a graph for groups, showing the direct groups dependencies
1229
1230
GROUP_GRAPHS           = YES
1231
1232
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
1233
# collaboration diagrams in a style similar to the OMG's Unified Modeling 
1234
# Language.
1235
1236
UML_LOOK               = YES
1237
1238
# If set to YES, the inheritance and collaboration graphs will show the 
1239
# relations between templates and their instances.
1240
1241
TEMPLATE_RELATIONS     = YES
1242
1243
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
1244
# tags are set to YES then doxygen will generate a graph for each documented 
1245
# file showing the direct and indirect include dependencies of the file with 
1246
# other documented files.
1247
1248
INCLUDE_GRAPH          = YES
1249
1250
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
1251
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
1252
# documented header file showing the documented files that directly or 
1253
# indirectly include this file.
1254
1255
INCLUDED_BY_GRAPH      = YES
1256
1257
# If the CALL_GRAPH and HAVE_DOT options are set to YES then 
1258
# doxygen will generate a call dependency graph for every global function 
1259
# or class method. Note that enabling this option will significantly increase 
1260
# the time of a run. So in most cases it will be better to enable call graphs 
1261
# for selected functions only using the \callgraph command.
1262
1263
CALL_GRAPH             = YES
1264
1265
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
1266
# doxygen will generate a caller dependency graph for every global function 
1267
# or class method. Note that enabling this option will significantly increase 
1268
# the time of a run. So in most cases it will be better to enable caller 
1269
# graphs for selected functions only using the \callergraph command.
1270
1271
CALLER_GRAPH           = YES
1272
1273
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
1274
# will graphical hierarchy of all classes instead of a textual one.
1275
1276
GRAPHICAL_HIERARCHY    = YES
1277
1278
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
1279
# then doxygen will show the dependencies a directory has on other directories 
1280
# in a graphical way. The dependency relations are determined by the #include
1281
# relations between the files in the directories.
1282
1283
DIRECTORY_GRAPH        = YES
1284
1285
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
1286
# generated by dot. Possible values are png, jpg, or gif
1287
# If left blank png will be used.
1288
1289
DOT_IMAGE_FORMAT       = png
1290
1291
# The tag DOT_PATH can be used to specify the path where the dot tool can be 
1292
# found. If left blank, it is assumed the dot tool can be found in the path.
1293
1294
DOT_PATH               = 
1295
1296
# The DOTFILE_DIRS tag can be used to specify one or more directories that 
1297
# contain dot files that are included in the documentation (see the 
1298
# \dotfile command).
1299
1300
DOTFILE_DIRS           = 
1301
1302
# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
1303
# nodes that will be shown in the graph. If the number of nodes in a graph 
1304
# becomes larger than this value, doxygen will truncate the graph, which is 
1305
# visualized by representing a node as a red box. Note that doxygen if the 
1306
# number of direct children of the root node in a graph is already larger than 
1307
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
1308
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1309
1310
DOT_GRAPH_MAX_NODES    = 50
1311
1312
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
1313
# graphs generated by dot. A depth value of 3 means that only nodes reachable 
1314
# from the root by following a path via at most 3 edges will be shown. Nodes 
1315
# that lay further from the root node will be omitted. Note that setting this 
1316
# option to 1 or 2 may greatly reduce the computation time needed for large 
1317
# code bases. Also note that the size of a graph can be further restricted by 
1318
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1319
1320
MAX_DOT_GRAPH_DEPTH    = 0
1321
1322
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
1323
# background. This is enabled by default, which results in a transparent 
1324
# background. Warning: Depending on the platform used, enabling this option 
1325
# may lead to badly anti-aliased labels on the edges of a graph (i.e. they 
1326
# become hard to read).
1327
1328
DOT_TRANSPARENT        = YES
1329
1330
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
1331
# files in one run (i.e. multiple -o and -T options on the command line). This 
1332
# makes dot run faster, but since only newer versions of dot (>1.8.10) 
1333
# support this, this feature is disabled by default.
1334
1335
DOT_MULTI_TARGETS      = NO
1336
1337
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
1338
# generate a legend page explaining the meaning of the various boxes and 
1339
# arrows in the dot generated graphs.
1340
1341
GENERATE_LEGEND        = YES
1342
1343
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
1344
# remove the intermediate dot files that are used to generate 
1345
# the various graphs.
1346
1347
DOT_CLEANUP            = YES
1348
1349
#---------------------------------------------------------------------------
1350
# Configuration::additions related to the search engine   
1351
#---------------------------------------------------------------------------
1352
1353
# The SEARCHENGINE tag specifies whether or not a search engine should be 
1354
# used. If set to NO the values of all tags below this one will be ignored.
1355
1356
SEARCHENGINE           = NO