~drizzle-trunk/drizzle/development : contents of libdrizzle/net

~drizzle-trunk/drizzle/development : (revision 419)

/* - mode: c; c-basic-offset: 2; indent-tabs-mode: nil; -*-
 *  vim:expandtab:shiftwidth=2:tabstop=2:smarttab:
 *
 *  Copyright (C) 2008 Sun Microsystems, Inc.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include "libdrizzle.h"
#include "libdrizzle_priv.h"
#include <libdrizzle/errmsg.h>
#include <vio/violite.h>
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#include <sys/socket.h>
#include <sys/poll.h>
#include <zlib.h>

/*
  The following handles the differences when this is linked between the
  client and the server.

  This gives an error if a too big packet is found
  The server can change this with the -O switch, but because the client
  can't normally do this the client should have a bigger max_allowed_packet.
*/


#define update_statistics(A)
#define thd_increment_bytes_sent(N)

#define TEST_BLOCKING        8
#define MAX_PACKET_LENGTH (256L*256L*256L-1)
#define MIN_COMPRESS_LENGTH		50	/* Don't compress small bl. */

static bool net_write_buff(NET *net, const unsigned char *packet, uint32_t len);


/** Init with packet info. */

bool my_net_init(NET *net, Vio* vio)
{
  net->vio = vio;
  my_net_local_init(net);            /* Set some limits */
  if (!(net->buff=(unsigned char*) malloc((size_t) net->max_packet+
                                  NET_HEADER_SIZE + COMP_HEADER_SIZE)))
    return(1);
  net->buff_end=net->buff+net->max_packet;
  net->error=0; net->return_status=0;
  net->pkt_nr=net->compress_pkt_nr=0;
  net->write_pos=net->read_pos = net->buff;
  net->last_error[0]=0;
  net->compress=0; net->reading_or_writing=0;
  net->where_b = net->remain_in_buf=0;
  net->last_errno=0;
  net->unused= 0;

  if (vio != 0)                    /* If real connection */
  {
    net->fd  = vio_fd(vio);            /* For perl DBI/DBD */
    vio_fastsend(vio);
  }
  return(0);
}

bool net_init_sock(NET * net, int sock, int flags)
{

  Vio *vio_tmp= vio_new(sock, VIO_TYPE_TCPIP, flags);
  if (vio_tmp == NULL)
    return true;
  else
    if (my_net_init(net, vio_tmp))
    {
      /* Only delete the temporary vio if we didn't already attach it to the
       * NET object.
       */
      if (vio_tmp && (net->vio != vio_tmp))
        vio_delete(vio_tmp);
      else
      {
        (void) shutdown(sock, SHUT_RDWR);
        (void) close(sock);
      }
      return true;
    }
  return false;
}

void net_end(NET *net)
{
  if (net->buff != NULL)
    free(net->buff);
  net->buff=0;
  return;
}

void net_close(NET *net)
{
  if (net->vio != NULL)
  {
    vio_delete(net->vio);
    net->vio= 0;
  }
}

bool net_peer_addr(NET *net, char *buf, uint16_t *port, size_t buflen)
{
  return vio_peer_addr(net->vio, buf, port, buflen);
}

void net_keepalive(NET *net, bool flag)
{
  vio_keepalive(net->vio, flag);
}

int net_get_sd(NET *net)
{
  return net->vio->sd;
}

bool net_should_close(NET *net)
{
  return net->error || (net->vio == 0);
}

bool net_more_data(NET *net)
{
  return (net->vio == 0 || net->vio->read_pos < net->vio->read_end);
}

/** Realloc the packet buffer. */

bool net_realloc(NET *net, size_t length)
{
  unsigned char *buff;
  size_t pkt_length;

  if (length >= net->max_packet_size)
  {
    /* @todo: 1 and 2 codes are identical. */
    net->error= 1;
    net->last_errno= CR_NET_PACKET_TOO_LARGE;
    return(1);
  }
  pkt_length = (length+IO_SIZE-1) & ~(IO_SIZE-1);
  /*
    We must allocate some extra bytes for the end 0 and to be able to
    read big compressed blocks
  */
  if (!(buff= (unsigned char*) realloc((char*) net->buff, pkt_length +
                               NET_HEADER_SIZE + COMP_HEADER_SIZE)))
  {
    /* @todo: 1 and 2 codes are identical. */
    net->error= 1;
    net->last_errno= CR_OUT_OF_MEMORY;
    /* In the server the error is reported by MY_WME flag. */
    return(1);
  }
  net->buff=net->write_pos=buff;
  net->buff_end=buff+(net->max_packet= (uint32_t) pkt_length);
  return(0);
}


/**
   Check if there is any data to be read from the socket.

   @param sd   socket descriptor

   @retval
   0  No data to read
   @retval
   1  Data or EOF to read
   @retval
   -1   Don't know if data is ready or not
*/

static bool net_data_is_ready(int sd)
{
  struct pollfd ufds;
  int res;

  ufds.fd= sd;
  ufds.events= POLLIN | POLLPRI;
  if (!(res= poll(&ufds, 1, 0)))
    return 0;
  if (res < 0 || !(ufds.revents & (POLLIN | POLLPRI)))
    return 0;
  return 1;
}

/**
   Remove unwanted characters from connection
   and check if disconnected.

   Read from socket until there is nothing more to read. Discard
   what is read.

   If there is anything when to read 'net_clear' is called this
   normally indicates an error in the protocol.

   When connection is properly closed (for TCP it means with
   a FIN packet), then select() considers a socket "ready to read",
   in the sense that there's EOF to read, but read() returns 0.

   @param net            NET handler
   @param clear_buffer           if <> 0, then clear all data from comm buff
*/

void net_clear(NET *net, bool clear_buffer)
{
  if (clear_buffer)
  {
    while (net_data_is_ready(net->vio->sd) > 0)
    {
      /* The socket is ready */
      if (vio_read(net->vio, net->buff,
                   (size_t) net->max_packet) <= 0)
      {
        net->error= 2;
        break;
      }
    }
  }
  net->pkt_nr=net->compress_pkt_nr=0;        /* Ready for new command */
  net->write_pos=net->buff;
  return;
}


/** Flush write_buffer if not empty. */

bool net_flush(NET *net)
{
  bool error= 0;
  if (net->buff != net->write_pos)
  {
    error=net_real_write(net, net->buff,
                         (size_t) (net->write_pos - net->buff)) ? 1 : 0;
    net->write_pos=net->buff;
  }
  /* Sync packet number if using compression */
  if (net->compress)
    net->pkt_nr=net->compress_pkt_nr;
  return(error);
}


/*****************************************************************************
 ** Write something to server/client buffer
 *****************************************************************************/

/**
   Write a logical packet with packet header.

   Format: Packet length (3 bytes), packet number(1 byte)
   When compression is used a 3 byte compression length is added

   @note
   If compression is used the original package is modified!
*/

bool
my_net_write(NET *net,const unsigned char *packet,size_t len)
{
  unsigned char buff[NET_HEADER_SIZE];
  if (unlikely(!net->vio)) /* nowhere to write */
    return 0;
  /*
    Big packets are handled by splitting them in packets of MAX_PACKET_LENGTH
    length. The last packet is always a packet that is < MAX_PACKET_LENGTH.
    (The last packet may even have a length of 0)
  */
  while (len >= MAX_PACKET_LENGTH)
  {
    const uint32_t z_size = MAX_PACKET_LENGTH;
    int3store(buff, z_size);
    buff[3]= (unsigned char) net->pkt_nr++;
    if (net_write_buff(net, buff, NET_HEADER_SIZE) ||
        net_write_buff(net, packet, z_size))
      return 1;
    packet += z_size;
    len-=     z_size;
  }
  /* Write last packet */
  int3store(buff,len);
  buff[3]= (unsigned char) net->pkt_nr++;
  if (net_write_buff(net, buff, NET_HEADER_SIZE))
    return 1;
  return net_write_buff(net,packet,len) ? 1 : 0;
}

/**
   Send a command to the server.

   The reason for having both header and packet is so that libdrizzle
   can easy add a header to a special command (like prepared statements)
   without having to re-alloc the string.

   As the command is part of the first data packet, we have to do some data
   juggling to put the command in there, without having to create a new
   packet.

   This function will split big packets into sub-packets if needed.
   (Each sub packet can only be 2^24 bytes)

   @param net        NET handler
   @param command    Command in MySQL server (enum enum_server_command)
   @param header    Header to write after command
   @param head_len    Length of header
   @param packet    Query or parameter to query
   @param len        Length of packet

   @retval
   0    ok
   @retval
   1    error
*/

bool
net_write_command(NET *net,unsigned char command,
                  const unsigned char *header, size_t head_len,
                  const unsigned char *packet, size_t len)
{
  uint32_t length=len+1+head_len;            /* 1 extra byte for command */
  unsigned char buff[NET_HEADER_SIZE+1];
  uint header_size=NET_HEADER_SIZE+1;

  buff[4]=command;                /* For first packet */

  if (length >= MAX_PACKET_LENGTH)
  {
    /* Take into account that we have the command in the first header */
    len= MAX_PACKET_LENGTH - 1 - head_len;
    do
    {
      int3store(buff, MAX_PACKET_LENGTH);
      buff[3]= (unsigned char) net->pkt_nr++;
      if (net_write_buff(net, buff, header_size) ||
          net_write_buff(net, header, head_len) ||
          net_write_buff(net, packet, len))
        return(1);
      packet+= len;
      length-= MAX_PACKET_LENGTH;
      len= MAX_PACKET_LENGTH;
      head_len= 0;
      header_size= NET_HEADER_SIZE;
    } while (length >= MAX_PACKET_LENGTH);
    len=length;                    /* Data left to be written */
  }
  int3store(buff,length);
  buff[3]= (unsigned char) net->pkt_nr++;
  return((net_write_buff(net, buff, header_size) ||
          (head_len && net_write_buff(net, header, head_len)) ||
          net_write_buff(net, packet, len) || net_flush(net)) ? 1 : 0 );
}

/**
   Caching the data in a local buffer before sending it.

   Fill up net->buffer and send it to the client when full.

   If the rest of the to-be-sent-packet is bigger than buffer,
   send it in one big block (to avoid copying to internal buffer).
   If not, copy the rest of the data to the buffer and return without
   sending data.

   @param net        Network handler
   @param packet    Packet to send
   @param len        Length of packet

   @note
   The cached buffer can be sent as it is with 'net_flush()'.
   In this code we have to be careful to not send a packet longer than
   MAX_PACKET_LENGTH to net_real_write() if we are using the compressed
   protocol as we store the length of the compressed packet in 3 bytes.

   @retval
   0    ok
   @retval
   1
*/

static bool
net_write_buff(NET *net, const unsigned char *packet, uint32_t len)
{
  uint32_t left_length;
  if (net->compress && net->max_packet > MAX_PACKET_LENGTH)
    left_length= MAX_PACKET_LENGTH - (net->write_pos - net->buff);
  else
    left_length= (uint32_t) (net->buff_end - net->write_pos);

  if (len > left_length)
  {
    if (net->write_pos != net->buff)
    {
      /* Fill up already used packet and write it */
      memcpy(net->write_pos,packet,left_length);
      if (net_real_write(net, net->buff,
                         (size_t) (net->write_pos - net->buff) + left_length))
        return 1;
      net->write_pos= net->buff;
      packet+= left_length;
      len-= left_length;
    }
    if (net->compress)
    {
      /*
        We can't have bigger packets than 16M with compression
        Because the uncompressed length is stored in 3 bytes
      */
      left_length= MAX_PACKET_LENGTH;
      while (len > left_length)
      {
        if (net_real_write(net, packet, left_length))
          return 1;
        packet+= left_length;
        len-= left_length;
      }
    }
    if (len > net->max_packet)
      return net_real_write(net, packet, len) ? 1 : 0;
    /* Send out rest of the blocks as full sized blocks */
  }
  memcpy(net->write_pos,packet,len);
  net->write_pos+= len;
  return 0;
}


/**
   Read and write one packet using timeouts.
   If needed, the packet is compressed before sending.

   @todo
   - TODO is it needed to set this variable if we have no socket
*/

/*
  TODO: rewrite this in a manner to do non-block writes. If a write can not be made, and we are
  in the server, yield to another process and come back later.
*/
int
net_real_write(NET *net,const unsigned char *packet, size_t len)
{
  size_t length;
  const unsigned char *pos,*end;
  uint retry_count= 0;

  /* Backup of the original SO_RCVTIMEO timeout */
  struct timeval backtime;
  int error;

  if (net->error == 2)
    return(-1);                /* socket can't be used */

  net->reading_or_writing=2;
  if (net->compress)
  {
    size_t complen;
    unsigned char *b;
    const uint header_length=NET_HEADER_SIZE+COMP_HEADER_SIZE;
    if (!(b= (unsigned char*) malloc(len + NET_HEADER_SIZE +
                             COMP_HEADER_SIZE)))
    {
      net->error= 2;
      net->last_errno= CR_OUT_OF_MEMORY;
      /* In the server, the error is reported by MY_WME flag. */
      net->reading_or_writing= 0;
      return(1);
    }
    memcpy(b+header_length,packet,len);

    complen= len * 120 / 100 + 12;
    unsigned char * compbuf= (unsigned char *) malloc(complen);
    if (compbuf != NULL)
    {
      uLongf tmp_complen= complen;
      int res= compress((Bytef*) compbuf, &tmp_complen,
                        (Bytef*) (b+header_length),
                        len);
      complen= tmp_complen;

      free(compbuf);

      if ((res != Z_OK) || (complen >= len))
        complen= 0;
      else
      {
        size_t tmplen= complen;
        complen= len;
        len= tmplen;
      }
    }
    else
    {
      complen=0;
    }
    int3store(&b[NET_HEADER_SIZE],complen);
    int3store(b,len);
    b[3]=(unsigned char) (net->compress_pkt_nr++);
    len+= header_length;
    packet= b;
  }

  /* Check for error, currently assert */
  if (net->write_timeout)
  {
    struct timeval waittime;
    socklen_t length;

    waittime.tv_sec= net->write_timeout;
    waittime.tv_usec= 0;

    memset(&backtime, 0, sizeof(struct timeval));
    length= sizeof(struct timeval);
    error= getsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &backtime, &length);
    if (error != 0)
    {
      perror("getsockopt");
      assert(error == 0);
    }
    error= setsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &waittime, (socklen_t)sizeof(struct timeval));
    assert(error == 0);
  }
  pos= packet;
  end=pos+len;
  /* Loop until we have read everything */
  while (pos != end)
  {
    if ((long) (length= vio_write(net->vio,pos,(size_t) (end-pos))) <= 0)
    {
      const bool interrupted= vio_should_retry(net->vio);
      /*
        If we read 0, or we were interrupted this means that
        we need to switch to blocking mode and wait until the timeout
        on the socket kicks in.
      */
      if ((interrupted || length == 0))
      {
        bool old_mode;

        while (vio_blocking(net->vio, true, &old_mode) < 0)
        {
          if (vio_should_retry(net->vio) && retry_count++ < net->retry_count)
            continue;
          net->error= 2;                     /* Close socket */
          net->last_errno= CR_NET_PACKET_TOO_LARGE;
          goto end;
        }
        retry_count=0;
        continue;
      }
      else
      {
        if (retry_count++ < net->retry_count)
          continue;
      }

      if (vio_errno(net->vio) == EINTR)
      {
        continue;
      }
      net->error= 2;                /* Close socket */
      net->last_errno= (interrupted ? CR_NET_WRITE_INTERRUPTED :
                        CR_NET_ERROR_ON_WRITE);
      break;
    }
    pos+=length;
    update_statistics(thd_increment_bytes_sent(length));
  }
end:
  if ((net->compress) && (packet != NULL))
    free((char*) packet);
  net->reading_or_writing=0;

  if (net->write_timeout)
    error= setsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &backtime, (socklen_t)sizeof(struct timeval));

  return(((int) (pos != end)));
}


/**
   Reads one packet to net->buff + net->where_b.
   Long packets are handled by my_net_read().
   This function reallocates the net->buff buffer if necessary.

   @return
   Returns length of packet.
*/

static uint32_t
my_real_read(NET *net, size_t *complen)
{
  unsigned char *pos;
  size_t length;
  uint i,retry_count=0;
  uint32_t len=packet_error;
  uint32_t remain= (net->compress ? NET_HEADER_SIZE+COMP_HEADER_SIZE :
                    NET_HEADER_SIZE);
  /* Backup of the original SO_RCVTIMEO timeout */
  struct timeval backtime;
  int error= 0;

  *complen = 0;

  net->reading_or_writing= 1;
  /* Read timeout is set in my_net_set_read_timeout */

  pos = net->buff + net->where_b;        /* net->packet -4 */


  /* Check for error, currently assert */
  if (net->read_timeout)
  {
    struct timeval waittime;
    socklen_t length;

    waittime.tv_sec= net->read_timeout;
    waittime.tv_usec= 0;

    memset(&backtime, 0, sizeof(struct timeval));
    length= sizeof(struct timeval);
    error= getsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &backtime, &length);
    if (error != 0)
    {
      perror("getsockopt");
      assert(error == 0);
    }
    error= setsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &waittime, (socklen_t)sizeof(struct timeval));
    assert(error == 0);
  }

  for (i= 0; i < 2 ; i++)
  {
    while (remain > 0)
    {
      /* First read is done with non blocking mode */
      if ((long) (length= vio_read(net->vio, pos, remain)) <= 0L)
      {
        const bool interrupted = vio_should_retry(net->vio);

        if (interrupted)
        {                    /* Probably in MIT threads */
          if (retry_count++ < net->retry_count)
            continue;
        }
        if (vio_errno(net->vio) == EINTR)
        {
          continue;
        }
        len= packet_error;
        net->error= 2;                /* Close socket */
        net->last_errno= (vio_was_interrupted(net->vio) ?
                          CR_NET_READ_INTERRUPTED :
                          CR_NET_READ_ERROR);
        ER(net->last_errno);
        goto end;
      }
      remain -= (uint32_t) length;
      pos+= length;
      update_statistics(thd_increment_bytes_received(length));
    }
    if (i == 0)
    {                    /* First parts is packet length */
      uint32_t helping;

      if (net->buff[net->where_b + 3] != (unsigned char) net->pkt_nr)
      {
        len= packet_error;
        /* Not a NET error on the client. XXX: why? */
        goto end;
      }
      net->compress_pkt_nr= ++net->pkt_nr;
      if (net->compress)
      {
        /*
          If the packet is compressed then complen > 0 and contains the
          number of bytes in the uncompressed packet
        */
        *complen=uint3korr(&(net->buff[net->where_b + NET_HEADER_SIZE]));
      }

      len=uint3korr(net->buff+net->where_b);
      if (!len)                /* End of big multi-packet */
        goto end;
      helping = max(len,*complen) + net->where_b;
      /* The necessary size of net->buff */
      if (helping >= net->max_packet)
      {
        if (net_realloc(net,helping))
        {
          len= packet_error;          /* Return error and close connection */
          goto end;
        }
      }
      pos=net->buff + net->where_b;
      remain = (uint32_t) len;
    }
  }

end:
  if  (net->read_timeout)
    error= setsockopt(net->vio->sd, SOL_SOCKET, SO_RCVTIMEO,
                      &backtime, (socklen_t)sizeof(struct timeval));
  assert(error == 0);
  net->reading_or_writing= 0;

  return(len);
}


/**
   Read a packet from the client/server and return it without the internal
   package header.

   If the packet is the first packet of a multi-packet packet
   (which is indicated by the length of the packet = 0xffffff) then
   all sub packets are read and concatenated.

   If the packet was compressed, its uncompressed and the length of the
   uncompressed packet is returned.

   @return
   The function returns the length of the found packet or packet_error.
   net->read_pos points to the read data.
*/

uint32_t
my_net_read(NET *net)
{
  size_t len, complen;

  if (!net->compress)
  {
    len = my_real_read(net,&complen);
    if (len == MAX_PACKET_LENGTH)
    {
      /* First packet of a multi-packet.  Concatenate the packets */
      uint32_t save_pos = net->where_b;
      size_t total_length= 0;
      do
      {
        net->where_b += len;
        total_length += len;
        len = my_real_read(net,&complen);
      } while (len == MAX_PACKET_LENGTH);
      if (len != packet_error)
        len+= total_length;
      net->where_b = save_pos;
    }
    net->read_pos = net->buff + net->where_b;
    if (len != packet_error)
      net->read_pos[len]=0;        /* Safeguard for drizzle_use_result */
    return len;
  }
  else
  {
    /* We are using the compressed protocol */

    uint32_t buf_length;
    uint32_t start_of_packet;
    uint32_t first_packet_offset;
    uint read_length, multi_byte_packet=0;

    if (net->remain_in_buf)
    {
      buf_length= net->buf_length;        /* Data left in old packet */
      first_packet_offset= start_of_packet= (net->buf_length -
                                             net->remain_in_buf);
      /* Restore the character that was overwritten by the end 0 */
      net->buff[start_of_packet]= net->save_char;
    }
    else
    {
      /* reuse buffer, as there is nothing in it that we need */
      buf_length= start_of_packet= first_packet_offset= 0;
    }
    for (;;)
    {
      uint32_t packet_len;

      if (buf_length - start_of_packet >= NET_HEADER_SIZE)
      {
        read_length = uint3korr(net->buff+start_of_packet);
        if (!read_length)
        {
          /* End of multi-byte packet */
          start_of_packet += NET_HEADER_SIZE;
          break;
        }
        if (read_length + NET_HEADER_SIZE <= buf_length - start_of_packet)
        {
          if (multi_byte_packet)
          {
            /* Remove packet header for second packet */
            memmove(net->buff + first_packet_offset + start_of_packet,
                    net->buff + first_packet_offset + start_of_packet +
                    NET_HEADER_SIZE,
                    buf_length - start_of_packet);
            start_of_packet += read_length;
            buf_length -= NET_HEADER_SIZE;
          }
          else
            start_of_packet+= read_length + NET_HEADER_SIZE;

          if (read_length != MAX_PACKET_LENGTH)    /* last package */
          {
            multi_byte_packet= 0;        /* No last zero len packet */
            break;
          }
          multi_byte_packet= NET_HEADER_SIZE;
          /* Move data down to read next data packet after current one */
          if (first_packet_offset)
          {
            memmove(net->buff,net->buff+first_packet_offset,
                    buf_length-first_packet_offset);
            buf_length-=first_packet_offset;
            start_of_packet -= first_packet_offset;
            first_packet_offset=0;
          }
          continue;
        }
      }
      /* Move data down to read next data packet after current one */
      if (first_packet_offset)
      {
        memmove(net->buff,net->buff+first_packet_offset,
                buf_length-first_packet_offset);
        buf_length-=first_packet_offset;
        start_of_packet -= first_packet_offset;
        first_packet_offset=0;
      }

      net->where_b=buf_length;
      if ((packet_len = my_real_read(net,&complen)) == packet_error)
        return packet_error;

      if (complen)
      {
        unsigned char * compbuf= (unsigned char *) malloc(complen);
        if (compbuf != NULL)
        {
          uLongf tmp_complen= complen;
          int error= uncompress((Bytef*) compbuf, &tmp_complen,
                                (Bytef*) (net->buff + net->where_b),
                                (uLong)packet_len);
          complen= tmp_complen;

          if (error != Z_OK)
          {
            net->error= 2;            /* caller will close socket */
            net->last_errno= CR_NET_UNCOMPRESS_ERROR;
          }
          else
          {
            memcpy((net->buff + net->where_b), compbuf, complen);
          }
          free(compbuf);
        }
      }
      else
        complen= packet_len;

    }
    buf_length+= complen;

    net->read_pos=      net->buff+ first_packet_offset + NET_HEADER_SIZE;
    net->buf_length=    buf_length;
    net->remain_in_buf= (uint32_t) (buf_length - start_of_packet);
    len = ((uint32_t) (start_of_packet - first_packet_offset) - NET_HEADER_SIZE -
           multi_byte_packet);
    net->save_char= net->read_pos[len];    /* Must be saved */
    net->read_pos[len]=0;        /* Safeguard for drizzle_use_result */
  }
  return len;
  }


void my_net_set_read_timeout(NET *net, uint timeout)
{
  net->read_timeout= timeout;
  if (net->vio)
    vio_timeout(net->vio, 0, timeout);
  return;
}


void my_net_set_write_timeout(NET *net, uint timeout)
{
  net->write_timeout= timeout;
  if (net->vio)
    vio_timeout(net->vio, 1, timeout);
  return;
}
/**
  Clear possible error state of struct NET

  @param net  clear the state of the argument
*/

void net_clear_error(NET *net)
{
  net->last_errno= 0;
  net->last_error[0]= '\0';
  strcpy(net->sqlstate, sqlstate_get_not_error());
}


383.1.36 by Monty Taylor Fixed copyright header and spacing in net_serv.c.	1	/* - mode: c; c-basic-offset: 2; indent-tabs-mode: nil; -*-
	2	* vim:expandtab:shiftwidth=2:tabstop=2:smarttab:
	3	*
	4	* Copyright (C) 2008 Sun Microsystems, Inc.
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
1 by brian clean slate	19	*/
383.1.36 by Monty Taylor Fixed copyright header and spacing in net_serv.c.	20
383.1.44 by Monty Taylor Renamed drizzle.h to libdrizzle.h.	21	#include "libdrizzle.h"
390.1.6 by Monty Taylor Oh dear god the changes. The changes. I'd tell you what they are, but I'd just be making stuff up. Suffice it to day it's mostly all around splitting files in libdrizzle into different files and removing interdepends. And whatever else I happened to see...	22	#include "libdrizzle_priv.h"
383.1.37 by Monty Taylor Removed some mysys from net_serv.c.	23	#include <libdrizzle/errmsg.h>
212.5.45 by Monty Taylor Removed excess AM_CPPFLAGS from the tree. Now the only thing that should be in the include path should be -I${top_srcdir} and -I${top_builddir}w	24	#include <vio/violite.h>
390.1.6 by Monty Taylor Oh dear god the changes. The changes. I'd tell you what they are, but I'd just be making stuff up. Suffice it to day it's mostly all around splitting files in libdrizzle into different files and removing interdepends. And whatever else I happened to see...	25	#include <assert.h>
	26	#include <stdio.h>
	27	#include <stdlib.h>
	28	#include <string.h>
1 by brian clean slate	29	#include <signal.h>
1 by brian clean slate	30	#include <errno.h>
390.1.6 by Monty Taylor Oh dear god the changes. The changes. I'd tell you what they are, but I'd just be making stuff up. Suffice it to day it's mostly all around splitting files in libdrizzle into different files and removing interdepends. And whatever else I happened to see...	31	#include <sys/socket.h>
212.5.30 by Monty Taylor Removed my_net.h. Pointless.	32	#include <sys/poll.h>
383.1.37 by Monty Taylor Removed some mysys from net_serv.c.	33	#include <zlib.h>
1 by brian clean slate	34
	35	/*
	36	The following handles the differences when this is linked between the
	37	client and the server.
	38
	39	This gives an error if a too big packet is found
	40	The server can change this with the -O switch, but because the client