/***************************************************************************** Copyright (c) 1995, 2009, Innobase Oy. All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *****************************************************************************/ /*********************************************************************** Copyright (c) 1995, 2009, Innobase Oy. All Rights Reserved. Copyright (c) 2009, Percona Inc. Portions of this file contain modifications contributed and copyrighted by Percona Inc.. Those modifications are gratefully acknowledged and are described briefly in the InnoDB documentation. The contributions by Percona Inc. are incorporated with their permission, and subject to the conditions contained in the file COPYING.Percona. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ***********************************************************************/ /**************************************************//** @file os/os0file.c The interface to the operating system file i/o primitives Created 10/21/1995 Heikki Tuuri *******************************************************/ #include "os0file.h" #include "ut0mem.h" #include "srv0srv.h" #include "srv0start.h" #include "fil0fil.h" #include "buf0buf.h" #include #include #include #include #ifndef UNIV_HOTBACKUP # include "os0sync.h" # include "os0thread.h" #else /* !UNIV_HOTBACKUP */ # ifdef __WIN__ /* Add includes for the _stat() call to compile on Windows */ # include # include # endif /* __WIN__ */ #endif /* !UNIV_HOTBACKUP */ /* This specifies the file permissions InnoDB uses when it creates files in Unix; the value of os_innodb_umask is initialized in ha_innodb.cc to my_umask */ #ifndef __WIN__ /** Umask for creating files */ UNIV_INTERN ulint os_innodb_umask = S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP; #else /** Umask for creating files */ UNIV_INTERN ulint os_innodb_umask = 0; #endif #ifdef UNIV_DO_FLUSH /* If the following is set to TRUE, we do not call os_file_flush in every os_file_write. We can set this TRUE when the doublewrite buffer is used. */ UNIV_INTERN ibool os_do_not_call_flush_at_each_write = FALSE; #else /* We do not call os_file_flush in every os_file_write. */ #endif /* UNIV_DO_FLUSH */ #ifndef UNIV_HOTBACKUP /* We use these mutexes to protect lseek + file i/o operation, if the OS does not provide an atomic pread or pwrite, or similar */ #define OS_FILE_N_SEEK_MUTEXES 16 UNIV_INTERN os_mutex_t os_file_seek_mutexes[OS_FILE_N_SEEK_MUTEXES]; /* In simulated aio, merge at most this many consecutive i/os */ #define OS_AIO_MERGE_N_CONSECUTIVE 64 /** If this flag is TRUE, then we will use the native aio of the OS (provided we compiled Innobase with it in), otherwise we will use simulated aio we build below with threads */ UNIV_INTERN ibool os_aio_use_native_aio = FALSE; /** Flag: enable debug printout for asynchronous i/o */ UNIV_INTERN ibool os_aio_print_debug = FALSE; /** The asynchronous i/o array slot structure */ typedef struct os_aio_slot_struct os_aio_slot_t; /** The asynchronous i/o array slot structure */ struct os_aio_slot_struct{ ibool is_read; /*!< TRUE if a read operation */ ulint pos; /*!< index of the slot in the aio array */ ibool reserved; /*!< TRUE if this slot is reserved */ time_t reservation_time;/*!< time when reserved */ ulint len; /*!< length of the block to read or write */ byte* buf; /*!< buffer used in i/o */ ulint type; /*!< OS_FILE_READ or OS_FILE_WRITE */ ulint offset; /*!< 32 low bits of file offset in bytes */ ulint offset_high; /*!< 32 high bits of file offset */ os_file_t file; /*!< file where to read or write */ const char* name; /*!< file name or path */ ibool io_already_done;/*!< used only in simulated aio: TRUE if the physical i/o already made and only the slot message needs to be passed to the caller of os_aio_simulated_handle */ fil_node_t* message1; /*!< message which is given by the */ void* message2; /*!< the requester of an aio operation and which can be used to identify which pending aio operation was completed */ #ifdef WIN_ASYNC_IO os_event_t event; /*!< event object we need in the OVERLAPPED struct */ OVERLAPPED control; /*!< Windows control block for the aio request */ #endif }; /** The asynchronous i/o array structure */ typedef struct os_aio_array_struct os_aio_array_t; /** The asynchronous i/o array structure */ struct os_aio_array_struct{ os_mutex_t mutex; /*!< the mutex protecting the aio array */ os_event_t not_full; /*!< The event which is set to the signaled state when there is space in the aio outside the ibuf segment */ os_event_t is_empty; /*!< The event which is set to the signaled state when there are no pending i/os in this array */ ulint n_slots;/*!< Total number of slots in the aio array. This must be divisible by n_threads. */ ulint n_segments; /*!< Number of segments in the aio array of pending aio requests. A thread can wait separately for any one of the segments. */ ulint n_reserved; /*!< Number of reserved slots in the aio array outside the ibuf segment */ os_aio_slot_t* slots; /*!< Pointer to the slots in the array */ #ifdef __WIN__ os_native_event_t* native_events; /*!< Pointer to an array of OS native event handles where we copied the handles from slots, in the same order. This can be used in WaitForMultipleObjects; used only in Windows */ #endif }; /** Array of events used in simulated aio */ static os_event_t* os_aio_segment_wait_events = NULL; /** The aio arrays for non-ibuf i/o and ibuf i/o, as well as sync aio. These are NULL when the module has not yet been initialized. @{ */ static os_aio_array_t* os_aio_read_array = NULL; /*!< Reads */ static os_aio_array_t* os_aio_write_array = NULL; /*!< Writes */ static os_aio_array_t* os_aio_ibuf_array = NULL; /*!< Insert buffer */ static os_aio_array_t* os_aio_log_array = NULL; /*!< Redo log */ static os_aio_array_t* os_aio_sync_array = NULL; /*!< Synchronous I/O */ /* @} */ /** Number of asynchronous I/O segments. Set by os_aio_init(). */ static ulint os_aio_n_segments = ULINT_UNDEFINED; /** If the following is TRUE, read i/o handler threads try to wait until a batch of new read requests have been posted */ static ibool os_aio_recommend_sleep_for_read_threads = FALSE; #endif /* !UNIV_HOTBACKUP */ UNIV_INTERN ulint os_n_file_reads = 0; UNIV_INTERN ulint os_bytes_read_since_printout = 0; UNIV_INTERN ulint os_n_file_writes = 0; UNIV_INTERN ulint os_n_fsyncs = 0; UNIV_INTERN ulint os_n_file_reads_old = 0; UNIV_INTERN ulint os_n_file_writes_old = 0; UNIV_INTERN ulint os_n_fsyncs_old = 0; UNIV_INTERN time_t os_last_printout; UNIV_INTERN ibool os_has_said_disk_full = FALSE; #ifndef UNIV_HOTBACKUP /** The mutex protecting the following counts of pending I/O operations */ static os_mutex_t os_file_count_mutex; #endif /* !UNIV_HOTBACKUP */ /** Number of pending os_file_pread() operations */ UNIV_INTERN ulint os_file_n_pending_preads = 0; /** Number of pending os_file_pwrite() operations */ UNIV_INTERN ulint os_file_n_pending_pwrites = 0; /** Number of pending write operations */ UNIV_INTERN ulint os_n_pending_writes = 0; /** Number of pending read operations */ UNIV_INTERN ulint os_n_pending_reads = 0; /***********************************************************************//** Gets the operating system version. Currently works only on Windows. @return OS_WIN95, OS_WIN31, OS_WINNT, OS_WIN2000 */ UNIV_INTERN ulint os_get_os_version(void) /*===================*/ { #ifdef __WIN__ OSVERSIONINFO os_info; os_info.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); ut_a(GetVersionEx(&os_info)); if (os_info.dwPlatformId == VER_PLATFORM_WIN32s) { return(OS_WIN31); } else if (os_info.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS) { return(OS_WIN95); } else if (os_info.dwPlatformId == VER_PLATFORM_WIN32_NT) { if (os_info.dwMajorVersion <= 4) { return(OS_WINNT); } else { return(OS_WIN2000); } } else { ut_error; return(0); } #else ut_error; return(0); #endif } /***********************************************************************//** Retrieves the last error number if an error occurs in a file io function. The number should be retrieved before any other OS calls (because they may overwrite the error number). If the number is not known to this program, the OS error number + 100 is returned. @return error number, or OS error number + 100 */ UNIV_INTERN ulint os_file_get_last_error( /*===================*/ ibool report_all_errors) /*!< in: TRUE if we want an error message printed of all errors */ { ulint err; #ifdef __WIN__ err = (ulint) GetLastError(); if (report_all_errors || (err != ERROR_DISK_FULL && err != ERROR_FILE_EXISTS)) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Operating system error number %lu" " in a file operation.\n", (ulong) err); if (err == ERROR_PATH_NOT_FOUND) { fprintf(stderr, "InnoDB: The error means the system" " cannot find the path specified.\n"); if (srv_is_being_started) { fprintf(stderr, "InnoDB: If you are installing InnoDB," " remember that you must create\n" "InnoDB: directories yourself, InnoDB" " does not create them.\n"); } } else if (err == ERROR_ACCESS_DENIED) { fprintf(stderr, "InnoDB: The error means mysqld does not have" " the access rights to\n" "InnoDB: the directory. It may also be" " you have created a subdirectory\n" "InnoDB: of the same name as a data file.\n"); } else if (err == ERROR_SHARING_VIOLATION || err == ERROR_LOCK_VIOLATION) { fprintf(stderr, "InnoDB: The error means that another program" " is using InnoDB's files.\n" "InnoDB: This might be a backup or antivirus" " software or another instance\n" "InnoDB: of MySQL." " Please close it to get rid of this error.\n"); } else { fprintf(stderr, "InnoDB: Some operating system error numbers" " are described at\n" "InnoDB: " REFMAN "operating-system-error-codes.html\n"); } } fflush(stderr); if (err == ERROR_FILE_NOT_FOUND) { return(OS_FILE_NOT_FOUND); } else if (err == ERROR_DISK_FULL) { return(OS_FILE_DISK_FULL); } else if (err == ERROR_FILE_EXISTS) { return(OS_FILE_ALREADY_EXISTS); } else if (err == ERROR_SHARING_VIOLATION || err == ERROR_LOCK_VIOLATION) { return(OS_FILE_SHARING_VIOLATION); } else { return(100 + err); } #else err = (ulint) errno; if (report_all_errors || (err != ENOSPC && err != EEXIST)) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Operating system error number %lu" " in a file operation.\n", (ulong) err); if (err == ENOENT) { fprintf(stderr, "InnoDB: The error means the system" " cannot find the path specified.\n"); if (srv_is_being_started) { fprintf(stderr, "InnoDB: If you are installing InnoDB," " remember that you must create\n" "InnoDB: directories yourself, InnoDB" " does not create them.\n"); } } else if (err == EACCES) { fprintf(stderr, "InnoDB: The error means mysqld does not have" " the access rights to\n" "InnoDB: the directory.\n"); } else { if (strerror((int)err) != NULL) { fprintf(stderr, "InnoDB: Error number %lu" " means '%s'.\n", err, strerror((int)err)); } fprintf(stderr, "InnoDB: Some operating system" " error numbers are described at\n" "InnoDB: " REFMAN "operating-system-error-codes.html\n"); } } fflush(stderr); if (err == ENOSPC) { return(OS_FILE_DISK_FULL); } else if (err == ENOENT) { return(OS_FILE_NOT_FOUND); } else if (err == EEXIST) { return(OS_FILE_ALREADY_EXISTS); } else if (err == EXDEV || err == ENOTDIR || err == EISDIR) { return(OS_FILE_PATH_ERROR); } else { return(100 + err); } #endif } /****************************************************************//** Does error handling when a file operation fails. Conditionally exits (calling exit(3)) based on should_exit value and the error type @return TRUE if we should retry the operation */ static ibool os_file_handle_error_cond_exit( /*===========================*/ const char* name, /*!< in: name of a file or NULL */ const char* operation, /*!< in: operation */ ibool should_exit) /*!< in: call exit(3) if unknown error and this parameter is TRUE */ { ulint err; err = os_file_get_last_error(FALSE); if (err == OS_FILE_DISK_FULL) { /* We only print a warning about disk full once */ if (os_has_said_disk_full) { return(FALSE); } if (name) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Encountered a problem with" " file %s\n", name); } ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Disk is full. Try to clean the disk" " to free space.\n"); os_has_said_disk_full = TRUE; fflush(stderr); return(FALSE); } else if (err == OS_FILE_AIO_RESOURCES_RESERVED) { return(TRUE); } else if (err == OS_FILE_ALREADY_EXISTS || err == OS_FILE_PATH_ERROR) { return(FALSE); } else if (err == OS_FILE_SHARING_VIOLATION) { os_thread_sleep(10000000); /* 10 sec */ return(TRUE); } else { if (name) { fprintf(stderr, "InnoDB: File name %s\n", name); } fprintf(stderr, "InnoDB: File operation call: '%s'.\n", operation); if (should_exit) { fprintf(stderr, "InnoDB: Cannot continue operation.\n"); fflush(stderr); exit(1); } } return(FALSE); } /****************************************************************//** Does error handling when a file operation fails. @return TRUE if we should retry the operation */ static ibool os_file_handle_error( /*=================*/ const char* name, /*!< in: name of a file or NULL */ const char* operation)/*!< in: operation */ { /* exit in case of unknown error */ return(os_file_handle_error_cond_exit(name, operation, TRUE)); } /****************************************************************//** Does error handling when a file operation fails. @return TRUE if we should retry the operation */ static ibool os_file_handle_error_no_exit( /*=========================*/ const char* name, /*!< in: name of a file or NULL */ const char* operation)/*!< in: operation */ { /* don't exit in case of unknown error */ return(os_file_handle_error_cond_exit(name, operation, FALSE)); } #undef USE_FILE_LOCK #define USE_FILE_LOCK #if defined(UNIV_HOTBACKUP) || defined(__WIN__) || defined(__NETWARE__) /* InnoDB Hot Backup does not lock the data files. * On Windows, mandatory locking is used. */ # undef USE_FILE_LOCK #endif #ifdef USE_FILE_LOCK /****************************************************************//** Obtain an exclusive lock on a file. @return 0 on success */ static int os_file_lock( /*=========*/ int fd, /*!< in: file descriptor */ const char* name) /*!< in: file name */ { struct flock lk; lk.l_type = F_WRLCK; lk.l_whence = SEEK_SET; lk.l_start = lk.l_len = 0; if (fcntl(fd, F_SETLK, &lk) == -1) { fprintf(stderr, "InnoDB: Unable to lock %s, error: %d\n", name, errno); if (errno == EAGAIN || errno == EACCES) { fprintf(stderr, "InnoDB: Check that you do not already have" " another mysqld process\n" "InnoDB: using the same InnoDB data" " or log files.\n"); } return(-1); } return(0); } #endif /* USE_FILE_LOCK */ #ifndef UNIV_HOTBACKUP /****************************************************************//** Creates the seek mutexes used in positioned reads and writes. */ UNIV_INTERN void os_io_init_simple(void) /*===================*/ { ulint i; os_file_count_mutex = os_mutex_create(NULL); for (i = 0; i < OS_FILE_N_SEEK_MUTEXES; i++) { os_file_seek_mutexes[i] = os_mutex_create(NULL); } } /***********************************************************************//** Creates a temporary file. This function is like tmpfile(3), but the temporary file is created in the MySQL temporary directory. On Netware, this function is like tmpfile(3), because the C run-time library of Netware does not expose the delete-on-close flag. @return temporary file handle, or NULL on error */ UNIV_INTERN FILE* os_file_create_tmpfile(void) /*========================*/ { #ifdef __NETWARE__ FILE* file = tmpfile(); #else /* __NETWARE__ */ FILE* file = NULL; int fd = innobase_mysql_tmpfile(); if (fd >= 0) { file = fdopen(fd, "w+b"); } #endif /* __NETWARE__ */ if (!file) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Error: unable to create temporary file;" " errno: %d\n", errno); #ifndef __NETWARE__ if (fd >= 0) { close(fd); } #endif /* !__NETWARE__ */ } return(file); } #endif /* !UNIV_HOTBACKUP */ /***********************************************************************//** The os_file_opendir() function opens a directory stream corresponding to the directory named by the dirname argument. The directory stream is positioned at the first entry. In both Unix and Windows we automatically skip the '.' and '..' items at the start of the directory listing. @return directory stream, NULL if error */ UNIV_INTERN os_file_dir_t os_file_opendir( /*============*/ const char* dirname, /*!< in: directory name; it must not contain a trailing '\' or '/' */ ibool error_is_fatal) /*!< in: TRUE if we should treat an error as a fatal error; if we try to open symlinks then we do not wish a fatal error if it happens not to be a directory */ { os_file_dir_t dir; #ifdef __WIN__ LPWIN32_FIND_DATA lpFindFileData; char path[OS_FILE_MAX_PATH + 3]; ut_a(strlen(dirname) < OS_FILE_MAX_PATH); strcpy(path, dirname); strcpy(path + strlen(path), "\\*"); /* Note that in Windows opening the 'directory stream' also retrieves the first entry in the directory. Since it is '.', that is no problem, as we will skip over the '.' and '..' entries anyway. */ lpFindFileData = ut_malloc(sizeof(WIN32_FIND_DATA)); dir = FindFirstFile((LPCTSTR) path, lpFindFileData); ut_free(lpFindFileData); if (dir == INVALID_HANDLE_VALUE) { if (error_is_fatal) { os_file_handle_error(dirname, "opendir"); } return(NULL); } return(dir); #else dir = opendir(dirname); if (dir == NULL && error_is_fatal) { os_file_handle_error(dirname, "opendir"); } return(dir); #endif } /***********************************************************************//** Closes a directory stream. @return 0 if success, -1 if failure */ UNIV_INTERN int os_file_closedir( /*=============*/ os_file_dir_t dir) /*!< in: directory stream */ { #ifdef __WIN__ BOOL ret; ret = FindClose(dir); if (!ret) { os_file_handle_error_no_exit(NULL, "closedir"); return(-1); } return(0); #else int ret; ret = closedir(dir); if (ret) { os_file_handle_error_no_exit(NULL, "closedir"); } return(ret); #endif } /***********************************************************************//** This function returns information of the next file in the directory. We jump over the '.' and '..' entries in the directory. @return 0 if ok, -1 if error, 1 if at the end of the directory */ UNIV_INTERN int os_file_readdir_next_file( /*======================*/ const char* dirname,/*!< in: directory name or path */ os_file_dir_t dir, /*!< in: directory stream */ os_file_stat_t* info) /*!< in/out: buffer where the info is returned */ { #ifdef __WIN__ LPWIN32_FIND_DATA lpFindFileData; BOOL ret; lpFindFileData = ut_malloc(sizeof(WIN32_FIND_DATA)); next_file: ret = FindNextFile(dir, lpFindFileData); if (ret) { ut_a(strlen((char *) lpFindFileData->cFileName) < OS_FILE_MAX_PATH); if (strcmp((char *) lpFindFileData->cFileName, ".") == 0 || strcmp((char *) lpFindFileData->cFileName, "..") == 0) { goto next_file; } strcpy(info->name, (char *) lpFindFileData->cFileName); info->size = (ib_int64_t)(lpFindFileData->nFileSizeLow) + (((ib_int64_t)(lpFindFileData->nFileSizeHigh)) << 32); if (lpFindFileData->dwFileAttributes & FILE_ATTRIBUTE_REPARSE_POINT) { /* TODO: test Windows symlinks */ /* TODO: MySQL has apparently its own symlink implementation in Windows, dbname.sym can redirect a database directory: REFMAN "windows-symbolic-links.html" */ info->type = OS_FILE_TYPE_LINK; } else if (lpFindFileData->dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) { info->type = OS_FILE_TYPE_DIR; } else { /* It is probably safest to assume that all other file types are normal. Better to check them rather than blindly skip them. */ info->type = OS_FILE_TYPE_FILE; } } ut_free(lpFindFileData); if (ret) { return(0); } else if (GetLastError() == ERROR_NO_MORE_FILES) { return(1); } else { os_file_handle_error_no_exit(dirname, "readdir_next_file"); return(-1); } #else struct dirent* ent; char* full_path; int ret; struct stat statinfo; #ifdef HAVE_READDIR_R char dirent_buf[sizeof(struct dirent) + _POSIX_PATH_MAX + 100]; /* In /mysys/my_lib.c, _POSIX_PATH_MAX + 1 is used as the max file name len; but in most standards, the length is NAME_MAX; we add 100 to be even safer */ #endif next_file: #ifdef HAVE_READDIR_R ret = readdir_r(dir, (struct dirent*)dirent_buf, &ent); if (ret != 0) { fprintf(stderr, "InnoDB: cannot read directory %s, error %lu\n", dirname, (ulong)ret); return(-1); } if (ent == NULL) { /* End of directory */ return(1); } ut_a(strlen(ent->d_name) < _POSIX_PATH_MAX + 100 - 1); #else ent = readdir(dir); if (ent == NULL) { return(1); } #endif ut_a(strlen(ent->d_name) < OS_FILE_MAX_PATH); if (strcmp(ent->d_name, ".") == 0 || strcmp(ent->d_name, "..") == 0) { goto next_file; } strcpy(info->name, ent->d_name); full_path = ut_malloc(strlen(dirname) + strlen(ent->d_name) + 10); sprintf(full_path, "%s/%s", dirname, ent->d_name); ret = stat(full_path, &statinfo); if (ret) { os_file_handle_error_no_exit(full_path, "stat"); ut_free(full_path); return(-1); } info->size = (ib_int64_t)statinfo.st_size; if (S_ISDIR(statinfo.st_mode)) { info->type = OS_FILE_TYPE_DIR; } else if (S_ISLNK(statinfo.st_mode)) { info->type = OS_FILE_TYPE_LINK; } else if (S_ISREG(statinfo.st_mode)) { info->type = OS_FILE_TYPE_FILE; } else { info->type = OS_FILE_TYPE_UNKNOWN; } ut_free(full_path); return(0); #endif } /*****************************************************************//** This function attempts to create a directory named pathname. The new directory gets default permissions. On Unix the permissions are (0770 & ~umask). If the directory exists already, nothing is done and the call succeeds, unless the fail_if_exists arguments is true. @return TRUE if call succeeds, FALSE on error */ UNIV_INTERN ibool os_file_create_directory( /*=====================*/ const char* pathname, /*!< in: directory name as null-terminated string */ ibool fail_if_exists) /*!< in: if TRUE, pre-existing directory is treated as an error. */ { #ifdef __WIN__ BOOL rcode; rcode = CreateDirectory((LPCTSTR) pathname, NULL); if (!(rcode != 0 || (GetLastError() == ERROR_ALREADY_EXISTS && !fail_if_exists))) { /* failure */ os_file_handle_error(pathname, "CreateDirectory"); return(FALSE); } return (TRUE); #else int rcode; rcode = mkdir(pathname, 0770); if (!(rcode == 0 || (errno == EEXIST && !fail_if_exists))) { /* failure */ os_file_handle_error(pathname, "mkdir"); return(FALSE); } return (TRUE); #endif } /****************************************************************//** A simple function to open or create a file. @return own: handle to the file, not defined if error, error number can be retrieved with os_file_get_last_error */ UNIV_INTERN os_file_t os_file_create_simple( /*==================*/ const char* name, /*!< in: name of the file or path as a null-terminated string */ ulint create_mode,/*!< in: OS_FILE_OPEN if an existing file is opened (if does not exist, error), or OS_FILE_CREATE if a new file is created (if exists, error), or OS_FILE_CREATE_PATH if new file (if exists, error) and subdirectories along its path are created (if needed)*/ ulint access_type,/*!< in: OS_FILE_READ_ONLY or OS_FILE_READ_WRITE */ ibool* success)/*!< out: TRUE if succeed, FALSE if error */ { #ifdef __WIN__ os_file_t file; DWORD create_flag; DWORD access; DWORD attributes = 0; ibool retry; try_again: ut_a(name); if (create_mode == OS_FILE_OPEN) { create_flag = OPEN_EXISTING; } else if (create_mode == OS_FILE_CREATE) { create_flag = CREATE_NEW; } else if (create_mode == OS_FILE_CREATE_PATH) { /* create subdirs along the path if needed */ *success = os_file_create_subdirs_if_needed(name); if (!*success) { ut_error; } create_flag = CREATE_NEW; create_mode = OS_FILE_CREATE; } else { create_flag = 0; ut_error; } if (access_type == OS_FILE_READ_ONLY) { access = GENERIC_READ; } else if (access_type == OS_FILE_READ_WRITE) { access = GENERIC_READ | GENERIC_WRITE; } else { access = 0; ut_error; } file = CreateFile((LPCTSTR) name, access, FILE_SHARE_READ | FILE_SHARE_WRITE, /* file can be read and written also by other processes */ NULL, /* default security attributes */ create_flag, attributes, NULL); /*!< no template file */ if (file == INVALID_HANDLE_VALUE) { *success = FALSE; retry = os_file_handle_error(name, create_mode == OS_FILE_OPEN ? "open" : "create"); if (retry) { goto try_again; } } else { *success = TRUE; } return(file); #else /* __WIN__ */ os_file_t file; int create_flag; ibool retry; try_again: ut_a(name); if (create_mode == OS_FILE_OPEN) { if (access_type == OS_FILE_READ_ONLY) { create_flag = O_RDONLY; } else { create_flag = O_RDWR; } } else if (create_mode == OS_FILE_CREATE) { create_flag = O_RDWR | O_CREAT | O_EXCL; } else if (create_mode == OS_FILE_CREATE_PATH) { /* create subdirs along the path if needed */ *success = os_file_create_subdirs_if_needed(name); if (!*success) { return (-1); } create_flag = O_RDWR | O_CREAT | O_EXCL; create_mode = OS_FILE_CREATE; } else { create_flag = 0; ut_error; } if (create_mode == OS_FILE_CREATE) { file = open(name, create_flag, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); } else { file = open(name, create_flag); } if (file == -1) { *success = FALSE; retry = os_file_handle_error(name, create_mode == OS_FILE_OPEN ? "open" : "create"); if (retry) { goto try_again; } #ifdef USE_FILE_LOCK } else if (access_type == OS_FILE_READ_WRITE && os_file_lock(file, name)) { *success = FALSE; close(file); file = -1; #endif } else { *success = TRUE; } return(file); #endif /* __WIN__ */ } /****************************************************************//** A simple function to open or create a file. @return own: handle to the file, not defined if error, error number can be retrieved with os_file_get_last_error */ UNIV_INTERN os_file_t os_file_create_simple_no_error_handling( /*====================================*/ const char* name, /*!< in: name of the file or path as a null-terminated string */ ulint create_mode,/*!< in: OS_FILE_OPEN if an existing file is opened (if does not exist, error), or OS_FILE_CREATE if a new file is created (if exists, error) */ ulint access_type,/*!< in: OS_FILE_READ_ONLY, OS_FILE_READ_WRITE, or OS_FILE_READ_ALLOW_DELETE; the last option is used by a backup program reading the file */ ibool* success)/*!< out: TRUE if succeed, FALSE if error */ { #ifdef __WIN__ os_file_t file; DWORD create_flag; DWORD access; DWORD attributes = 0; DWORD share_mode = FILE_SHARE_READ | FILE_SHARE_WRITE; ut_a(name); if (create_mode == OS_FILE_OPEN) { create_flag = OPEN_EXISTING; } else if (create_mode == OS_FILE_CREATE) { create_flag = CREATE_NEW; } else { create_flag = 0; ut_error; } if (access_type == OS_FILE_READ_ONLY) { access = GENERIC_READ; } else if (access_type == OS_FILE_READ_WRITE) { access = GENERIC_READ | GENERIC_WRITE; } else if (access_type == OS_FILE_READ_ALLOW_DELETE) { access = GENERIC_READ; share_mode = FILE_SHARE_DELETE | FILE_SHARE_READ | FILE_SHARE_WRITE; /*!< A backup program has to give mysqld the maximum freedom to do what it likes with the file */ } else { access = 0; ut_error; } file = CreateFile((LPCTSTR) name, access, share_mode, NULL, /* default security attributes */ create_flag, attributes, NULL); /*!< no template file */ if (file == INVALID_HANDLE_VALUE) { *success = FALSE; } else { *success = TRUE; } return(file); #else /* __WIN__ */ os_file_t file; int create_flag; ut_a(name); if (create_mode == OS_FILE_OPEN) { if (access_type == OS_FILE_READ_ONLY) { create_flag = O_RDONLY; } else { create_flag = O_RDWR; } } else if (create_mode == OS_FILE_CREATE) { create_flag = O_RDWR | O_CREAT | O_EXCL; } else { create_flag = 0; ut_error; } if (create_mode == OS_FILE_CREATE) { file = open(name, create_flag, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); } else { file = open(name, create_flag); } if (file == -1) { *success = FALSE; #ifdef USE_FILE_LOCK } else if (access_type == OS_FILE_READ_WRITE && os_file_lock(file, name)) { *success = FALSE; close(file); file = -1; #endif } else { *success = TRUE; } return(file); #endif /* __WIN__ */ } /****************************************************************//** Tries to disable OS caching on an opened file descriptor. */ UNIV_INTERN void os_file_set_nocache( /*================*/ int fd, /*!< in: file descriptor to alter */ const char* file_name, /*!< in: file name, used in the diagnostic message */ const char* operation_name) /*!< in: "open" or "create"; used in the diagnostic message */ { /* some versions of Solaris may not have DIRECTIO_ON */ #if defined(UNIV_SOLARIS) && defined(DIRECTIO_ON) if (directio(fd, DIRECTIO_ON) == -1) { int errno_save; errno_save = (int)errno; ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Failed to set DIRECTIO_ON " "on file %s: %s: %s, continuing anyway\n", file_name, operation_name, strerror(errno_save)); } #elif defined(O_DIRECT) if (fcntl(fd, F_SETFL, O_DIRECT) == -1) { int errno_save; errno_save = (int)errno; ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Failed to set O_DIRECT " "on file %s: %s: %s, continuing anyway\n", file_name, operation_name, strerror(errno_save)); if (errno_save == EINVAL) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: O_DIRECT is known to result in " "'Invalid argument' on Linux on tmpfs, " "see MySQL Bug#26662\n"); } } #else /* Required for OSX */ (void)fd; (void)file_name; (void)operation_name; #endif } /****************************************************************//** Opens an existing file or creates a new. @return own: handle to the file, not defined if error, error number can be retrieved with os_file_get_last_error */ UNIV_INTERN os_file_t os_file_create( /*===========*/ const char* name, /*!< in: name of the file or path as a null-terminated string */ ulint create_mode,/*!< in: OS_FILE_OPEN if an existing file is opened (if does not exist, error), or OS_FILE_CREATE if a new file is created (if exists, error), OS_FILE_OVERWRITE if a new file is created or an old overwritten; OS_FILE_OPEN_RAW, if a raw device or disk partition should be opened */ ulint purpose,/*!< in: OS_FILE_AIO, if asynchronous, non-buffered i/o is desired, OS_FILE_NORMAL, if any normal file; NOTE that it also depends on type, os_aio_.. and srv_.. variables whether we really use async i/o or unbuffered i/o: look in the function source code for the exact rules */ ulint type, /*!< in: OS_DATA_FILE or OS_LOG_FILE */ ibool* success)/*!< out: TRUE if succeed, FALSE if error */ { #ifdef __WIN__ os_file_t file; DWORD share_mode = FILE_SHARE_READ; DWORD create_flag; DWORD attributes; ibool retry; try_again: ut_a(name); if (create_mode == OS_FILE_OPEN_RAW) { create_flag = OPEN_EXISTING; share_mode = FILE_SHARE_WRITE; } else if (create_mode == OS_FILE_OPEN || create_mode == OS_FILE_OPEN_RETRY) { create_flag = OPEN_EXISTING; } else if (create_mode == OS_FILE_CREATE) { create_flag = CREATE_NEW; } else if (create_mode == OS_FILE_OVERWRITE) { create_flag = CREATE_ALWAYS; } else { create_flag = 0; ut_error; } if (purpose == OS_FILE_AIO) { /* If specified, use asynchronous (overlapped) io and no buffering of writes in the OS */ attributes = 0; #ifdef WIN_ASYNC_IO if (os_aio_use_native_aio) { attributes = attributes | FILE_FLAG_OVERLAPPED; } #endif #ifdef UNIV_NON_BUFFERED_IO if (type == OS_LOG_FILE && srv_flush_log_at_trx_commit == 2) { /* Do not use unbuffered i/o to log files because value 2 denotes that we do not flush the log at every commit, but only once per second */ } else if (srv_win_file_flush_method == SRV_WIN_IO_UNBUFFERED) { attributes = attributes | FILE_FLAG_NO_BUFFERING; } #endif } else if (purpose == OS_FILE_NORMAL) { attributes = 0; #ifdef UNIV_NON_BUFFERED_IO if (type == OS_LOG_FILE && srv_flush_log_at_trx_commit == 2) { /* Do not use unbuffered i/o to log files because value 2 denotes that we do not flush the log at every commit, but only once per second */ } else if (srv_win_file_flush_method == SRV_WIN_IO_UNBUFFERED) { attributes = attributes | FILE_FLAG_NO_BUFFERING; } #endif } else { attributes = 0; ut_error; } file = CreateFile((LPCTSTR) name, GENERIC_READ | GENERIC_WRITE, /* read and write access */ share_mode, /* File can be read also by other processes; we must give the read permission because of ibbackup. We do not give the write permission to others because if one would succeed to start 2 instances of mysqld on the SAME files, that could cause severe database corruption! When opening raw disk partitions, Microsoft manuals say that we must give also the write permission. */ NULL, /* default security attributes */ create_flag, attributes, NULL); /*!< no template file */ if (file == INVALID_HANDLE_VALUE) { *success = FALSE; /* When srv_file_per_table is on, file creation failure may not be critical to the whole instance. Do not crash the server in case of unknown errors. */ if (srv_file_per_table) { retry = os_file_handle_error_no_exit(name, create_mode == OS_FILE_CREATE ? "create" : "open"); } else { retry = os_file_handle_error(name, create_mode == OS_FILE_CREATE ? "create" : "open"); } if (retry) { goto try_again; } } else { *success = TRUE; } return(file); #else /* __WIN__ */ os_file_t file; int create_flag; ibool retry; const char* mode_str = NULL; const char* type_str = NULL; const char* purpose_str = NULL; try_again: ut_a(name); if (create_mode == OS_FILE_OPEN || create_mode == OS_FILE_OPEN_RAW || create_mode == OS_FILE_OPEN_RETRY) { mode_str = "OPEN"; create_flag = O_RDWR; } else if (create_mode == OS_FILE_CREATE) { mode_str = "CREATE"; create_flag = O_RDWR | O_CREAT | O_EXCL; } else if (create_mode == OS_FILE_OVERWRITE) { mode_str = "OVERWRITE"; create_flag = O_RDWR | O_CREAT | O_TRUNC; } else { create_flag = 0; ut_error; } if (type == OS_LOG_FILE) { type_str = "LOG"; } else if (type == OS_DATA_FILE) { type_str = "DATA"; } else { ut_error; } if (purpose == OS_FILE_AIO) { purpose_str = "AIO"; } else if (purpose == OS_FILE_NORMAL) { purpose_str = "NORMAL"; } else { ut_error; } #if 0 fprintf(stderr, "Opening file %s, mode %s, type %s, purpose %s\n", name, mode_str, type_str, purpose_str); #endif #ifdef O_SYNC /* We let O_SYNC only affect log files; note that we map O_DSYNC to O_SYNC because the datasync options seemed to corrupt files in 2001 in both Linux and Solaris */ if (type == OS_LOG_FILE && srv_unix_file_flush_method == SRV_UNIX_O_DSYNC) { # if 0 fprintf(stderr, "Using O_SYNC for file %s\n", name); # endif create_flag = create_flag | O_SYNC; } #endif /* O_SYNC */ file = open(name, create_flag, os_innodb_umask); if (file == -1) { *success = FALSE; /* When srv_file_per_table is on, file creation failure may not be critical to the whole instance. Do not crash the server in case of unknown errors. */ if (srv_file_per_table) { retry = os_file_handle_error_no_exit(name, create_mode == OS_FILE_CREATE ? "create" : "open"); } else { retry = os_file_handle_error(name, create_mode == OS_FILE_CREATE ? "create" : "open"); } if (retry) { goto try_again; } else { return(file /* -1 */); } } /* else */ *success = TRUE; /* We disable OS caching (O_DIRECT) only on data files */ if (type != OS_LOG_FILE && srv_unix_file_flush_method == SRV_UNIX_O_DIRECT) { os_file_set_nocache(file, name, mode_str); } #ifdef USE_FILE_LOCK if (create_mode != OS_FILE_OPEN_RAW && os_file_lock(file, name)) { if (create_mode == OS_FILE_OPEN_RETRY) { int i; ut_print_timestamp(stderr); fputs(" InnoDB: Retrying to lock" " the first data file\n", stderr); for (i = 0; i < 100; i++) { os_thread_sleep(1000000); if (!os_file_lock(file, name)) { *success = TRUE; return(file); } } ut_print_timestamp(stderr); fputs(" InnoDB: Unable to open the first data file\n", stderr); } *success = FALSE; close(file); file = -1; } #endif /* USE_FILE_LOCK */ return(file); #endif /* __WIN__ */ } /***********************************************************************//** Deletes a file if it exists. The file has to be closed before calling this. @return TRUE if success */ UNIV_INTERN ibool os_file_delete_if_exists( /*=====================*/ const char* name) /*!< in: file path as a null-terminated string */ { #ifdef __WIN__ BOOL ret; ulint count = 0; loop: /* In Windows, deleting an .ibd file may fail if ibbackup is copying it */ ret = DeleteFile((LPCTSTR)name); if (ret) { return(TRUE); } if (GetLastError() == ERROR_FILE_NOT_FOUND) { /* the file does not exist, this not an error */ return(TRUE); } count++; if (count > 100 && 0 == (count % 10)) { fprintf(stderr, "InnoDB: Warning: cannot delete file %s\n" "InnoDB: Are you running ibbackup" " to back up the file?\n", name); os_file_get_last_error(TRUE); /* print error information */ } os_thread_sleep(1000000); /* sleep for a second */ if (count > 2000) { return(FALSE); } goto loop; #else int ret; ret = unlink(name); if (ret != 0 && errno != ENOENT) { os_file_handle_error_no_exit(name, "delete"); return(FALSE); } return(TRUE); #endif } /***********************************************************************//** Deletes a file. The file has to be closed before calling this. @return TRUE if success */ UNIV_INTERN ibool os_file_delete( /*===========*/ const char* name) /*!< in: file path as a null-terminated string */ { #ifdef __WIN__ BOOL ret; ulint count = 0; loop: /* In Windows, deleting an .ibd file may fail if ibbackup is copying it */ ret = DeleteFile((LPCTSTR)name); if (ret) { return(TRUE); } if (GetLastError() == ERROR_FILE_NOT_FOUND) { /* If the file does not exist, we classify this as a 'mild' error and return */ return(FALSE); } count++; if (count > 100 && 0 == (count % 10)) { fprintf(stderr, "InnoDB: Warning: cannot delete file %s\n" "InnoDB: Are you running ibbackup" " to back up the file?\n", name); os_file_get_last_error(TRUE); /* print error information */ } os_thread_sleep(1000000); /* sleep for a second */ if (count > 2000) { return(FALSE); } goto loop; #else int ret; ret = unlink(name); if (ret != 0) { os_file_handle_error_no_exit(name, "delete"); return(FALSE); } return(TRUE); #endif } /***********************************************************************//** Renames a file (can also move it to another directory). It is safest that the file is closed before calling this function. @return TRUE if success */ UNIV_INTERN ibool os_file_rename( /*===========*/ const char* oldpath,/*!< in: old file path as a null-terminated string */ const char* newpath)/*!< in: new file path */ { #ifdef __WIN__ BOOL ret; ret = MoveFile((LPCTSTR)oldpath, (LPCTSTR)newpath); if (ret) { return(TRUE); } os_file_handle_error_no_exit(oldpath, "rename"); return(FALSE); #else int ret; ret = rename(oldpath, newpath); if (ret != 0) { os_file_handle_error_no_exit(oldpath, "rename"); return(FALSE); } return(TRUE); #endif } /***********************************************************************//** Closes a file handle. In case of error, error number can be retrieved with os_file_get_last_error. @return TRUE if success */ UNIV_INTERN ibool os_file_close( /*==========*/ os_file_t file) /*!< in, own: handle to a file */ { #ifdef __WIN__ BOOL ret; ut_a(file); ret = CloseHandle(file); if (ret) { return(TRUE); } os_file_handle_error(NULL, "close"); return(FALSE); #else int ret; ret = close(file); if (ret == -1) { os_file_handle_error(NULL, "close"); return(FALSE); } return(TRUE); #endif } #ifdef UNIV_HOTBACKUP /***********************************************************************//** Closes a file handle. @return TRUE if success */ UNIV_INTERN ibool os_file_close_no_error_handling( /*============================*/ os_file_t file) /*!< in, own: handle to a file */ { #ifdef __WIN__ BOOL ret; ut_a(file); ret = CloseHandle(file); if (ret) { return(TRUE); } return(FALSE); #else int ret; ret = close(file); if (ret == -1) { return(FALSE); } return(TRUE); #endif } #endif /* UNIV_HOTBACKUP */ /***********************************************************************//** Gets a file size. @return TRUE if success */ UNIV_INTERN ibool os_file_get_size( /*=============*/ os_file_t file, /*!< in: handle to a file */ ulint* size, /*!< out: least significant 32 bits of file size */ ulint* size_high)/*!< out: most significant 32 bits of size */ { #ifdef __WIN__ DWORD high; DWORD low; low = GetFileSize(file, &high); if ((low == 0xFFFFFFFF) && (GetLastError() != NO_ERROR)) { return(FALSE); } *size = low; *size_high = high; return(TRUE); #else off_t offs; offs = lseek(file, 0, SEEK_END); if (offs == ((off_t)-1)) { return(FALSE); } if (sizeof(off_t) > 4) { *size = (ulint)(offs & 0xFFFFFFFFUL); *size_high = (ulint)(offs >> 32); } else { *size = (ulint) offs; *size_high = 0; } return(TRUE); #endif } /***********************************************************************//** Gets file size as a 64-bit integer ib_int64_t. @return size in bytes, -1 if error */ UNIV_INTERN ib_int64_t os_file_get_size_as_iblonglong( /*===========================*/ os_file_t file) /*!< in: handle to a file */ { ulint size; ulint size_high; ibool success; success = os_file_get_size(file, &size, &size_high); if (!success) { return(-1); } return((((ib_int64_t)size_high) << 32) + (ib_int64_t)size); } /***********************************************************************//** Write the specified number of zeros to a newly created file. @return TRUE if success */ UNIV_INTERN ibool os_file_set_size( /*=============*/ const char* name, /*!< in: name of the file or path as a null-terminated string */ os_file_t file, /*!< in: handle to a file */ ulint size, /*!< in: least significant 32 bits of file size */ ulint size_high)/*!< in: most significant 32 bits of size */ { ib_int64_t current_size; ib_int64_t desired_size; ibool ret; byte* buf; byte* buf2; ulint buf_size; ut_a(size == (size & 0xFFFFFFFF)); current_size = 0; desired_size = (ib_int64_t)size + (((ib_int64_t)size_high) << 32); /* Write up to 1 megabyte at a time. */ buf_size = ut_min(64, (ulint) (desired_size / UNIV_PAGE_SIZE)) * UNIV_PAGE_SIZE; buf2 = ut_malloc(buf_size + UNIV_PAGE_SIZE); /* Align the buffer for possible raw i/o */ buf = ut_align(buf2, UNIV_PAGE_SIZE); /* Write buffer full of zeros */ memset(buf, 0, buf_size); if (desired_size >= (ib_int64_t)(100 * 1024 * 1024)) { fprintf(stderr, "InnoDB: Progress in MB:"); } while (current_size < desired_size) { ulint n_bytes; if (desired_size - current_size < (ib_int64_t) buf_size) { n_bytes = (ulint) (desired_size - current_size); } else { n_bytes = buf_size; } ret = os_file_write(name, file, buf, (ulint)(current_size & 0xFFFFFFFF), (ulint)(current_size >> 32), n_bytes); if (!ret) { ut_free(buf2); goto error_handling; } /* Print about progress for each 100 MB written */ if ((ib_int64_t) (current_size + n_bytes) / (ib_int64_t)(100 * 1024 * 1024) != current_size / (ib_int64_t)(100 * 1024 * 1024)) { fprintf(stderr, " %lu00", (ulong) ((current_size + n_bytes) / (ib_int64_t)(100 * 1024 * 1024))); } current_size += n_bytes; } if (desired_size >= (ib_int64_t)(100 * 1024 * 1024)) { fprintf(stderr, "\n"); } ut_free(buf2); ret = os_file_flush(file); if (ret) { return(TRUE); } error_handling: return(FALSE); } /***********************************************************************//** Truncates a file at its current position. @return TRUE if success */ UNIV_INTERN ibool os_file_set_eof( /*============*/ FILE* file) /*!< in: file to be truncated */ { #ifdef __WIN__ HANDLE h = (HANDLE) _get_osfhandle(fileno(file)); return(SetEndOfFile(h)); #else /* __WIN__ */ return(!ftruncate(fileno(file), ftell(file))); #endif /* __WIN__ */ } #ifndef __WIN__ /***********************************************************************//** Wrapper to fsync(2) that retries the call on some errors. Returns the value 0 if successful; otherwise the value -1 is returned and the global variable errno is set to indicate the error. @return 0 if success, -1 otherwise */ static int os_file_fsync( /*==========*/ os_file_t file) /*!< in: handle to a file */ { int ret; int failures; ibool retry; failures = 0; do { ret = fsync(file); os_n_fsyncs++; if (ret == -1 && errno == ENOLCK) { if (failures % 100 == 0) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: fsync(): " "No locks available; retrying\n"); } os_thread_sleep(200000 /* 0.2 sec */); failures++; retry = TRUE; } else { retry = FALSE; } } while (retry); return(ret); } #endif /* !__WIN__ */ /***********************************************************************//** Flushes the write buffers of a given file to the disk. @return TRUE if success */ UNIV_INTERN ibool os_file_flush( /*==========*/ os_file_t file) /*!< in, own: handle to a file */ { #ifdef __WIN__ BOOL ret; ut_a(file); os_n_fsyncs++; ret = FlushFileBuffers(file); if (ret) { return(TRUE); } /* Since Windows returns ERROR_INVALID_FUNCTION if the 'file' is actually a raw device, we choose to ignore that error if we are using raw disks */ if (srv_start_raw_disk_in_use && GetLastError() == ERROR_INVALID_FUNCTION) { return(TRUE); } os_file_handle_error(NULL, "flush"); /* It is a fatal error if a file flush does not succeed, because then the database can get corrupt on disk */ ut_error; return(FALSE); #else int ret; #if defined(HAVE_DARWIN_THREADS) # ifndef F_FULLFSYNC /* The following definition is from the Mac OS X 10.3 */ # define F_FULLFSYNC 51 /* fsync + ask the drive to flush to the media */ # elif F_FULLFSYNC != 51 # error "F_FULLFSYNC != 51: ABI incompatibility with Mac OS X 10.3" # endif /* Apple has disabled fsync() for internal disk drives in OS X. That caused corruption for a user when he tested a power outage. Let us in OS X use a nonstandard flush method recommended by an Apple engineer. */ if (!srv_have_fullfsync) { /* If we are not on an operating system that supports this, then fall back to a plain fsync. */ ret = os_file_fsync(file); } else { ret = fcntl(file, F_FULLFSYNC, NULL); if (ret) { /* If we are not on a file system that supports this, then fall back to a plain fsync. */ ret = os_file_fsync(file); } } #else ret = os_file_fsync(file); #endif if (ret == 0) { return(TRUE); } /* Since Linux returns EINVAL if the 'file' is actually a raw device, we choose to ignore that error if we are using raw disks */ if (srv_start_raw_disk_in_use && errno == EINVAL) { return(TRUE); } ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Error: the OS said file flush did not succeed\n"); os_file_handle_error(NULL, "flush"); /* It is a fatal error if a file flush does not succeed, because then the database can get corrupt on disk */ ut_error; return(FALSE); #endif } #ifndef __WIN__ /*******************************************************************//** Does a synchronous read operation in Posix. @return number of bytes read, -1 if error */ static ssize_t os_file_pread( /*==========*/ os_file_t file, /*!< in: handle to a file */ void* buf, /*!< in: buffer where to read */ ulint n, /*!< in: number of bytes to read */ ulint offset, /*!< in: least significant 32 bits of file offset from where to read */ ulint offset_high) /*!< in: most significant 32 bits of offset */ { off_t offs; ssize_t n_bytes; ut_a((offset & 0xFFFFFFFFUL) == offset); /* If off_t is > 4 bytes in size, then we assume we can pass a 64-bit address */ if (sizeof(off_t) > 4) { offs = (off_t)offset + (((off_t)offset_high) << 32); } else { offs = (off_t)offset; if (offset_high > 0) { fprintf(stderr, "InnoDB: Error: file read at offset > 4 GB\n"); } } os_n_file_reads++; #if defined(HAVE_PREAD) && !defined(HAVE_BROKEN_PREAD) os_mutex_enter(os_file_count_mutex); os_file_n_pending_preads++; os_n_pending_reads++; os_mutex_exit(os_file_count_mutex); n_bytes = pread(file, buf, (ssize_t)n, offs); os_mutex_enter(os_file_count_mutex); os_file_n_pending_preads--; os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); return(n_bytes); #else { off_t ret_offset; ssize_t ret; ulint i; os_mutex_enter(os_file_count_mutex); os_n_pending_reads++; os_mutex_exit(os_file_count_mutex); /* Protect the seek / read operation with a mutex */ i = ((ulint) file) % OS_FILE_N_SEEK_MUTEXES; os_mutex_enter(os_file_seek_mutexes[i]); ret_offset = lseek(file, offs, SEEK_SET); if (ret_offset < 0) { ret = -1; } else { ret = read(file, buf, (ssize_t)n); } os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); return(ret); } #endif } /*******************************************************************//** Does a synchronous write operation in Posix. @return number of bytes written, -1 if error */ static ssize_t os_file_pwrite( /*===========*/ os_file_t file, /*!< in: handle to a file */ const void* buf, /*!< in: buffer from where to write */ ulint n, /*!< in: number of bytes to write */ ulint offset, /*!< in: least significant 32 bits of file offset where to write */ ulint offset_high) /*!< in: most significant 32 bits of offset */ { ssize_t ret; off_t offs; ut_a((offset & 0xFFFFFFFFUL) == offset); /* If off_t is > 4 bytes in size, then we assume we can pass a 64-bit address */ if (sizeof(off_t) > 4) { offs = (off_t)offset + (((off_t)offset_high) << 32); } else { offs = (off_t)offset; if (offset_high > 0) { fprintf(stderr, "InnoDB: Error: file write" " at offset > 4 GB\n"); } } os_n_file_writes++; #if defined(HAVE_PWRITE) && !defined(HAVE_BROKEN_PREAD) os_mutex_enter(os_file_count_mutex); os_file_n_pending_pwrites++; os_n_pending_writes++; os_mutex_exit(os_file_count_mutex); ret = pwrite(file, buf, (ssize_t)n, offs); os_mutex_enter(os_file_count_mutex); os_file_n_pending_pwrites--; os_n_pending_writes--; os_mutex_exit(os_file_count_mutex); # ifdef UNIV_DO_FLUSH if (srv_unix_file_flush_method != SRV_UNIX_LITTLESYNC && srv_unix_file_flush_method != SRV_UNIX_NOSYNC && !os_do_not_call_flush_at_each_write) { /* Always do fsync to reduce the probability that when the OS crashes, a database page is only partially physically written to disk. */ ut_a(TRUE == os_file_flush(file)); } # endif /* UNIV_DO_FLUSH */ return(ret); #else { off_t ret_offset; ulint i; os_mutex_enter(os_file_count_mutex); os_n_pending_writes++; os_mutex_exit(os_file_count_mutex); /* Protect the seek / write operation with a mutex */ i = ((ulint) file) % OS_FILE_N_SEEK_MUTEXES; os_mutex_enter(os_file_seek_mutexes[i]); ret_offset = lseek(file, offs, SEEK_SET); if (ret_offset < 0) { ret = -1; goto func_exit; } ret = write(file, buf, (ssize_t)n); # ifdef UNIV_DO_FLUSH if (srv_unix_file_flush_method != SRV_UNIX_LITTLESYNC && srv_unix_file_flush_method != SRV_UNIX_NOSYNC && !os_do_not_call_flush_at_each_write) { /* Always do fsync to reduce the probability that when the OS crashes, a database page is only partially physically written to disk. */ ut_a(TRUE == os_file_flush(file)); } # endif /* UNIV_DO_FLUSH */ func_exit: os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_writes--; os_mutex_exit(os_file_count_mutex); return(ret); } #endif } #endif /*******************************************************************//** Requests a synchronous positioned read operation. @return TRUE if request was successful, FALSE if fail */ UNIV_INTERN ibool os_file_read( /*=========*/ os_file_t file, /*!< in: handle to a file */ void* buf, /*!< in: buffer where to read */ ulint offset, /*!< in: least significant 32 bits of file offset where to read */ ulint offset_high, /*!< in: most significant 32 bits of offset */ ulint n) /*!< in: number of bytes to read */ { #ifdef __WIN__ BOOL ret; DWORD len; DWORD ret2; DWORD low; DWORD high; ibool retry; ulint i; ut_a((offset & 0xFFFFFFFFUL) == offset); os_n_file_reads++; os_bytes_read_since_printout += n; try_again: ut_ad(file); ut_ad(buf); ut_ad(n > 0); low = (DWORD) offset; high = (DWORD) offset_high; os_mutex_enter(os_file_count_mutex); os_n_pending_reads++; os_mutex_exit(os_file_count_mutex); /* Protect the seek / read operation with a mutex */ i = ((ulint) file) % OS_FILE_N_SEEK_MUTEXES; os_mutex_enter(os_file_seek_mutexes[i]); ret2 = SetFilePointer(file, low, &high, FILE_BEGIN); if (ret2 == 0xFFFFFFFF && GetLastError() != NO_ERROR) { os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); goto error_handling; } ret = ReadFile(file, buf, (DWORD) n, &len, NULL); os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); if (ret && len == n) { return(TRUE); } #else ibool retry; ssize_t ret; os_bytes_read_since_printout += n; try_again: ret = os_file_pread(file, buf, n, offset, offset_high); if ((ulint)ret == n) { return(TRUE); } fprintf(stderr, "InnoDB: Error: tried to read %lu bytes at offset %lu %lu.\n" "InnoDB: Was only able to read %ld.\n", (ulong)n, (ulong)offset_high, (ulong)offset, (long)ret); #endif #ifdef __WIN__ error_handling: #endif retry = os_file_handle_error(NULL, "read"); if (retry) { goto try_again; } fprintf(stderr, "InnoDB: Fatal error: cannot read from file." " OS error number %lu.\n", #ifdef __WIN__ (ulong) GetLastError() #else (ulong) errno #endif ); fflush(stderr); ut_error; return(FALSE); } /*******************************************************************//** Requests a synchronous positioned read operation. This function does not do any error handling. In case of error it returns FALSE. @return TRUE if request was successful, FALSE if fail */ UNIV_INTERN ibool os_file_read_no_error_handling( /*===========================*/ os_file_t file, /*!< in: handle to a file */ void* buf, /*!< in: buffer where to read */ ulint offset, /*!< in: least significant 32 bits of file offset where to read */ ulint offset_high, /*!< in: most significant 32 bits of offset */ ulint n) /*!< in: number of bytes to read */ { #ifdef __WIN__ BOOL ret; DWORD len; DWORD ret2; DWORD low; DWORD high; ibool retry; ulint i; ut_a((offset & 0xFFFFFFFFUL) == offset); os_n_file_reads++; os_bytes_read_since_printout += n; try_again: ut_ad(file); ut_ad(buf); ut_ad(n > 0); low = (DWORD) offset; high = (DWORD) offset_high; os_mutex_enter(os_file_count_mutex); os_n_pending_reads++; os_mutex_exit(os_file_count_mutex); /* Protect the seek / read operation with a mutex */ i = ((ulint) file) % OS_FILE_N_SEEK_MUTEXES; os_mutex_enter(os_file_seek_mutexes[i]); ret2 = SetFilePointer(file, low, &high, FILE_BEGIN); if (ret2 == 0xFFFFFFFF && GetLastError() != NO_ERROR) { os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); goto error_handling; } ret = ReadFile(file, buf, (DWORD) n, &len, NULL); os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_reads--; os_mutex_exit(os_file_count_mutex); if (ret && len == n) { return(TRUE); } #else ibool retry; ssize_t ret; os_bytes_read_since_printout += n; try_again: ret = os_file_pread(file, buf, n, offset, offset_high); if ((ulint)ret == n) { return(TRUE); } #endif #ifdef __WIN__ error_handling: #endif retry = os_file_handle_error_no_exit(NULL, "read"); if (retry) { goto try_again; } return(FALSE); } /*******************************************************************//** Rewind file to its start, read at most size - 1 bytes from it to str, and NUL-terminate str. All errors are silently ignored. This function is mostly meant to be used with temporary files. */ UNIV_INTERN void os_file_read_string( /*================*/ FILE* file, /*!< in: file to read from */ char* str, /*!< in: buffer where to read */ ulint size) /*!< in: size of buffer */ { size_t flen; if (size == 0) { return; } rewind(file); flen = fread(str, 1, size - 1, file); str[flen] = '\0'; } /*******************************************************************//** Requests a synchronous write operation. @return TRUE if request was successful, FALSE if fail */ UNIV_INTERN ibool os_file_write( /*==========*/ const char* name, /*!< in: name of the file or path as a null-terminated string */ os_file_t file, /*!< in: handle to a file */ const void* buf, /*!< in: buffer from which to write */ ulint offset, /*!< in: least significant 32 bits of file offset where to write */ ulint offset_high, /*!< in: most significant 32 bits of offset */ ulint n) /*!< in: number of bytes to write */ { #ifdef __WIN__ BOOL ret; DWORD len; DWORD ret2; DWORD low; DWORD high; ulint i; ulint n_retries = 0; ulint err; ut_a((offset & 0xFFFFFFFF) == offset); os_n_file_writes++; ut_ad(file); ut_ad(buf); ut_ad(n > 0); retry: low = (DWORD) offset; high = (DWORD) offset_high; os_mutex_enter(os_file_count_mutex); os_n_pending_writes++; os_mutex_exit(os_file_count_mutex); /* Protect the seek / write operation with a mutex */ i = ((ulint) file) % OS_FILE_N_SEEK_MUTEXES; os_mutex_enter(os_file_seek_mutexes[i]); ret2 = SetFilePointer(file, low, &high, FILE_BEGIN); if (ret2 == 0xFFFFFFFF && GetLastError() != NO_ERROR) { os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_writes--; os_mutex_exit(os_file_count_mutex); ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Error: File pointer positioning to" " file %s failed at\n" "InnoDB: offset %lu %lu. Operating system" " error number %lu.\n" "InnoDB: Some operating system error numbers" " are described at\n" "InnoDB: " REFMAN "operating-system-error-codes.html\n", name, (ulong) offset_high, (ulong) offset, (ulong) GetLastError()); return(FALSE); } ret = WriteFile(file, buf, (DWORD) n, &len, NULL); /* Always do fsync to reduce the probability that when the OS crashes, a database page is only partially physically written to disk. */ # ifdef UNIV_DO_FLUSH if (!os_do_not_call_flush_at_each_write) { ut_a(TRUE == os_file_flush(file)); } # endif /* UNIV_DO_FLUSH */ os_mutex_exit(os_file_seek_mutexes[i]); os_mutex_enter(os_file_count_mutex); os_n_pending_writes--; os_mutex_exit(os_file_count_mutex); if (ret && len == n) { return(TRUE); } /* If some background file system backup tool is running, then, at least in Windows 2000, we may get here a specific error. Let us retry the operation 100 times, with 1 second waits. */ if (GetLastError() == ERROR_LOCK_VIOLATION && n_retries < 100) { os_thread_sleep(1000000); n_retries++; goto retry; } if (!os_has_said_disk_full) { err = (ulint)GetLastError(); ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Error: Write to file %s failed" " at offset %lu %lu.\n" "InnoDB: %lu bytes should have been written," " only %lu were written.\n" "InnoDB: Operating system error number %lu.\n" "InnoDB: Check that your OS and file system" " support files of this size.\n" "InnoDB: Check also that the disk is not full" " or a disk quota exceeded.\n", name, (ulong) offset_high, (ulong) offset, (ulong) n, (ulong) len, (ulong) err); if (strerror((int)err) != NULL) { fprintf(stderr, "InnoDB: Error number %lu means '%s'.\n", (ulong) err, strerror((int)err)); } fprintf(stderr, "InnoDB: Some operating system error numbers" " are described at\n" "InnoDB: " REFMAN "operating-system-error-codes.html\n"); os_has_said_disk_full = TRUE; } return(FALSE); #else ssize_t ret; ret = os_file_pwrite(file, buf, n, offset, offset_high); if ((ulint)ret == n) { return(TRUE); } if (!os_has_said_disk_full) { ut_print_timestamp(stderr); fprintf(stderr, " InnoDB: Error: Write to file %s failed" " at offset %lu %lu.\n" "InnoDB: %lu bytes should have been written," " only %ld were written.\n" "InnoDB: Operating system error number %lu.\n" "InnoDB: Check that your OS and file system" " support files of this size.\n" "InnoDB: Check also that the disk is not full" " or a disk quota exceeded.\n", name, offset_high, offset, n, (long int)ret, (ulint)errno); if (strerror(errno) != NULL) { fprintf(stderr, "InnoDB: Error number %lu means '%s'.\n", (ulint)errno, strerror(errno)); } fprintf(stderr, "InnoDB: Some operating system error numbers" " are described at\n" "InnoDB: " REFMAN "operating-system-error-codes.html\n"); os_has_said_disk_full = TRUE; } return(FALSE); #endif } /*******************************************************************//** Check the existence and type of the given file. @return TRUE if call succeeded */ UNIV_INTERN ibool os_file_status( /*===========*/ const char* path, /*!< in: pathname of the file */ ibool* exists, /*!< out: TRUE if file exists */ os_file_type_t* type) /*!< out: type of the file (if it exists) */ { #ifdef __WIN__ int ret; struct _stat statinfo; ret = _stat(path, &statinfo); if (ret && (errno == ENOENT || errno == ENOTDIR)) { /* file does not exist */ *exists = FALSE; return(TRUE); } else if (ret) { /* file exists, but stat call failed */ os_file_handle_error_no_exit(path, "stat"); return(FALSE); } if (_S_IFDIR & statinfo.st_mode) { *type = OS_FILE_TYPE_DIR; } else if (_S_IFREG & statinfo.st_mode) { *type = OS_FILE_TYPE_FILE; } else { *type = OS_FILE_TYPE_UNKNOWN; } *exists = TRUE; return(TRUE); #else int ret; struct stat statinfo; ret = stat(path, &statinfo); if (ret && (errno == ENOENT || errno == ENOTDIR)) { /* file does not exist */ *exists = FALSE; return(TRUE); } else if (ret) { /* file exists, but stat call failed */ os_file_handle_error_no_exit(path, "stat"); return(FALSE); } if (S_ISDIR(statinfo.st_mode)) { *type = OS_FILE_TYPE_DIR; } else if (S_ISLNK(statinfo.st_mode)) { *type = OS_FILE_TYPE_LINK; } else if (S_ISREG(statinfo.st_mode)) { *type = OS_FILE_TYPE_FILE; } else { *type = OS_FILE_TYPE_UNKNOWN; } *exists = TRUE; return(TRUE); #endif } /*******************************************************************//** This function returns information about the specified file @return TRUE if stat information found */ UNIV_INTERN ibool os_file_get_status( /*===============*/ const char* path, /*!< in: pathname of the file */ os_file_stat_t* stat_info) /*!< information of a file in a directory */ { #ifdef __WIN__ int ret; struct _stat statinfo; ret = _stat(path, &statinfo); if (ret && (errno == ENOENT || errno == ENOTDIR)) { /* file does not exist */ return(FALSE); } else if (ret) { /* file exists, but stat call failed */ os_file_handle_error_no_exit(path, "stat"); return(FALSE); } if (_S_IFDIR & statinfo.st_mode) { stat_info->type = OS_FILE_TYPE_DIR; } else if (_S_IFREG & statinfo.st_mode) { stat_info->type = OS_FILE_TYPE_FILE; } else { stat_info->type = OS_FILE_TYPE_UNKNOWN; } stat_info->ctime = statinfo.st_ctime; stat_info->atime = statinfo.st_atime; stat_info->mtime = statinfo.st_mtime; stat_info->size = statinfo.st_size; return(TRUE); #else int ret; struct stat statinfo; ret = stat(path, &statinfo); if (ret && (errno == ENOENT || errno == ENOTDIR)) { /* file does not exist */ return(FALSE); } else if (ret) { /* file exists, but stat call failed */ os_file_handle_error_no_exit(path, "stat"); return(FALSE); } if (S_ISDIR(statinfo.st_mode)) { stat_info->type = OS_FILE_TYPE_DIR; } else if (S_ISLNK(statinfo.st_mode)) { stat_info->type = OS_FILE_TYPE_LINK; } else if (S_ISREG(statinfo.st_mode)) { stat_info->type = OS_FILE_TYPE_FILE; } else { stat_info->type = OS_FILE_TYPE_UNKNOWN; } stat_info->ctime = statinfo.st_ctime; stat_info->atime = statinfo.st_atime; stat_info->mtime = statinfo.st_mtime; stat_info->size = statinfo.st_size; return(TRUE); #endif } /* path name separator character */ #ifdef __WIN__ # define OS_FILE_PATH_SEPARATOR '\\' #else # define OS_FILE_PATH_SEPARATOR '/' #endif /****************************************************************//** The function os_file_dirname returns a directory component of a null-terminated pathname string. In the usual case, dirname returns the string up to, but not including, the final '/', and basename is the component following the final '/'. Trailing '/' charac­ ters are not counted as part of the pathname. If path does not contain a slash, dirname returns the string ".". Concatenating the string returned by dirname, a "/", and the basename yields a complete pathname. The return value is a copy of the directory component of the pathname. The copy is allocated from heap. It is the caller responsibility to free it after it is no longer needed. The following list of examples (taken from SUSv2) shows the strings returned by dirname and basename for different paths: path dirname basename "/usr/lib" "/usr" "lib" "/usr/" "/" "usr" "usr" "." "usr" "/" "/" "/" "." "." "." ".." "." ".." @return own: directory component of the pathname */ UNIV_INTERN char* os_file_dirname( /*============*/ const char* path) /*!< in: pathname */ { /* Find the offset of the last slash */ const char* last_slash = strrchr(path, OS_FILE_PATH_SEPARATOR); if (!last_slash) { /* No slash in the path, return "." */ return(mem_strdup(".")); } /* Ok, there is a slash */ if (last_slash == path) { /* last slash is the first char of the path */ return(mem_strdup("/")); } /* Non-trivial directory component */ return(mem_strdupl(path, last_slash - path)); } /****************************************************************//** Creates all missing subdirectories along the given path. @return TRUE if call succeeded FALSE otherwise */ UNIV_INTERN ibool os_file_create_subdirs_if_needed( /*=============================*/ const char* path) /*!< in: path name */ { char* subdir; ibool success, subdir_exists; os_file_type_t type; subdir = os_file_dirname(path); if (strlen(subdir) == 1 && (*subdir == OS_FILE_PATH_SEPARATOR || *subdir == '.')) { /* subdir is root or cwd, nothing to do */ mem_free(subdir); return(TRUE); } /* Test if subdir exists */ success = os_file_status(subdir, &subdir_exists, &type); if (success && !subdir_exists) { /* subdir does not exist, create it */ success = os_file_create_subdirs_if_needed(subdir); if (!success) { mem_free(subdir); return(FALSE); } success = os_file_create_directory(subdir, FALSE); } mem_free(subdir); return(success); } #ifndef UNIV_HOTBACKUP /****************************************************************//** Returns a pointer to the nth slot in the aio array. @return pointer to slot */ static os_aio_slot_t* os_aio_array_get_nth_slot( /*======================*/ os_aio_array_t* array, /*!< in: aio array */ ulint index) /*!< in: index of the slot */ { ut_a(index < array->n_slots); return((array->slots) + index); } /************************************************************************//** Creates an aio wait array. @return own: aio array */ static os_aio_array_t* os_aio_array_create( /*================*/ ulint n, /*!< in: maximum number of pending aio operations allowed; n must be divisible by n_segments */ ulint n_segments) /*!< in: number of segments in the aio array */ { os_aio_array_t* array; ulint i; os_aio_slot_t* slot; #ifdef WIN_ASYNC_IO OVERLAPPED* over; #endif ut_a(n > 0); ut_a(n_segments > 0); array = ut_malloc(sizeof(os_aio_array_t)); array->mutex = os_mutex_create(NULL); array->not_full = os_event_create(NULL); array->is_empty = os_event_create(NULL); os_event_set(array->is_empty); array->n_slots = n; array->n_segments = n_segments; array->n_reserved = 0; array->slots = ut_malloc(n * sizeof(os_aio_slot_t)); #ifdef __WIN__ array->native_events = ut_malloc(n * sizeof(os_native_event_t)); #endif for (i = 0; i < n; i++) { slot = os_aio_array_get_nth_slot(array, i); slot->pos = i; slot->reserved = FALSE; #ifdef WIN_ASYNC_IO slot->event = os_event_create(NULL); over = &(slot->control); over->hEvent = slot->event->handle; *((array->native_events) + i) = over->hEvent; #endif } return(array); } /*********************************************************************** Initializes the asynchronous io system. Creates one array each for ibuf and log i/o. Also creates one array each for read and write where each array is divided logically into n_read_segs and n_write_segs respectively. The caller must create an i/o handler thread for each segment in these arrays. This function also creates the sync array. No i/o handler thread needs to be created for that */ UNIV_INTERN void os_aio_init( /*========*/ ulint n_per_seg, /*= 4); os_io_init_simple(); for (i = 0; i < n_segments; i++) { srv_set_io_thread_op_info(i, "not started yet"); } /* fprintf(stderr, "Array n per seg %lu\n", n_per_seg); */ os_aio_ibuf_array = os_aio_array_create(n_per_seg, 1); srv_io_thread_function[0] = "insert buffer thread"; os_aio_log_array = os_aio_array_create(n_per_seg, 1); srv_io_thread_function[1] = "log thread"; os_aio_read_array = os_aio_array_create(n_read_segs * n_per_seg, n_read_segs); for (i = 2; i < 2 + n_read_segs; i++) { ut_a(i < SRV_MAX_N_IO_THREADS); srv_io_thread_function[i] = "read thread"; } os_aio_write_array = os_aio_array_create(n_write_segs * n_per_seg, n_write_segs); for (i = 2 + n_read_segs; i < n_segments; i++) { ut_a(i < SRV_MAX_N_IO_THREADS); srv_io_thread_function[i] = "write thread"; } os_aio_sync_array = os_aio_array_create(n_slots_sync, 1); os_aio_n_segments = n_segments; os_aio_validate(); os_aio_segment_wait_events = ut_malloc(n_segments * sizeof(void*)); for (i = 0; i < n_segments; i++) { os_aio_segment_wait_events[i] = os_event_create(NULL); } os_last_printout = time(NULL); } #ifdef WIN_ASYNC_IO /************************************************************************//** Wakes up all async i/o threads in the array in Windows async i/o at shutdown. */ static void os_aio_array_wake_win_aio_at_shutdown( /*==================================*/ os_aio_array_t* array) /*!< in: aio array */ { ulint i; for (i = 0; i < array->n_slots; i++) { os_event_set((array->slots + i)->event); } } #endif /************************************************************************//** Wakes up all async i/o threads so that they know to exit themselves in shutdown. */ UNIV_INTERN void os_aio_wake_all_threads_at_shutdown(void) /*=====================================*/ { ulint i; #ifdef WIN_ASYNC_IO /* This code wakes up all ai/o threads in Windows native aio */ os_aio_array_wake_win_aio_at_shutdown(os_aio_read_array); os_aio_array_wake_win_aio_at_shutdown(os_aio_write_array); os_aio_array_wake_win_aio_at_shutdown(os_aio_ibuf_array); os_aio_array_wake_win_aio_at_shutdown(os_aio_log_array); #endif /* This loop wakes up all simulated ai/o threads */ for (i = 0; i < os_aio_n_segments; i++) { os_event_set(os_aio_segment_wait_events[i]); } } /************************************************************************//** Waits until there are no pending writes in os_aio_write_array. There can be other, synchronous, pending writes. */ UNIV_INTERN void os_aio_wait_until_no_pending_writes(void) /*=====================================*/ { os_event_wait(os_aio_write_array->is_empty); } /**********************************************************************//** Calculates segment number for a slot. @return segment number (which is the number used by, for example, i/o-handler threads) */ static ulint os_aio_get_segment_no_from_slot( /*============================*/ os_aio_array_t* array, /*!< in: aio wait array */ os_aio_slot_t* slot) /*!< in: slot in this array */ { ulint segment; ulint seg_len; if (array == os_aio_ibuf_array) { segment = 0; } else if (array == os_aio_log_array) { segment = 1; } else if (array == os_aio_read_array) { seg_len = os_aio_read_array->n_slots / os_aio_read_array->n_segments; segment = 2 + slot->pos / seg_len; } else { ut_a(array == os_aio_write_array); seg_len = os_aio_write_array->n_slots / os_aio_write_array->n_segments; segment = os_aio_read_array->n_segments + 2 + slot->pos / seg_len; } return(segment); } /**********************************************************************//** Calculates local segment number and aio array from global segment number. @return local segment number within the aio array */ static ulint os_aio_get_array_and_local_segment( /*===============================*/ os_aio_array_t** array, /*!< out: aio wait array */ ulint global_segment)/*!< in: global segment number */ { ulint segment; ut_a(global_segment < os_aio_n_segments); if (global_segment == 0) { *array = os_aio_ibuf_array; segment = 0; } else if (global_segment == 1) { *array = os_aio_log_array; segment = 0; } else if (global_segment < os_aio_read_array->n_segments + 2) { *array = os_aio_read_array; segment = global_segment - 2; } else { *array = os_aio_write_array; segment = global_segment - (os_aio_read_array->n_segments + 2); } return(segment); } /*******************************************************************//** Requests for a slot in the aio array. If no slot is available, waits until not_full-event becomes signaled. @return pointer to slot */ static os_aio_slot_t* os_aio_array_reserve_slot( /*======================*/ ulint type, /*!< in: OS_FILE_READ or OS_FILE_WRITE */ os_aio_array_t* array, /*!< in: aio array */ fil_node_t* message1,/*!< in: message to be passed along with the aio operation */ void* message2,/*!< in: message to be passed along with the aio operation */ os_file_t file, /*!< in: file handle */ const char* name, /*!< in: name of the file or path as a null-terminated string */ void* buf, /*!< in: buffer where to read or from which to write */ ulint offset, /*!< in: least significant 32 bits of file offset */ ulint offset_high, /*!< in: most significant 32 bits of offset */ ulint len) /*!< in: length of the block to read or write */ { os_aio_slot_t* slot; #ifdef WIN_ASYNC_IO OVERLAPPED* control; #endif ulint i; ulint slots_per_seg; ulint local_seg; /* No need of a mutex. Only reading constant fields */ slots_per_seg = array->n_slots / array->n_segments; /* We attempt to keep adjacent blocks in the same local segment. This can help in merging IO requests when we are doing simulated AIO */ local_seg = (offset >> (UNIV_PAGE_SIZE_SHIFT + 6)) % array->n_segments; loop: os_mutex_enter(array->mutex); if (array->n_reserved == array->n_slots) { os_mutex_exit(array->mutex); if (!os_aio_use_native_aio) { /* If the handler threads are suspended, wake them so that we get more slots */ os_aio_simulated_wake_handler_threads(); } os_event_wait(array->not_full); goto loop; } /* First try to find a slot in the preferred local segment */ for (i = local_seg * slots_per_seg; i < array->n_slots; i++) { slot = os_aio_array_get_nth_slot(array, i); if (slot->reserved == FALSE) { goto found; } } /* Fall back to a full scan. We are guaranteed to find a slot */ for (i = 0;; i++) { slot = os_aio_array_get_nth_slot(array, i); if (slot->reserved == FALSE) { goto found; } } found: ut_a(slot->reserved == FALSE); array->n_reserved++; if (array->n_reserved == 1) { os_event_reset(array->is_empty); } if (array->n_reserved == array->n_slots) { os_event_reset(array->not_full); } slot->reserved = TRUE; slot->reservation_time = time(NULL); slot->message1 = message1; slot->message2 = message2; slot->file = file; slot->name = name; slot->len = len; slot->type = type; slot->buf = buf; slot->offset = offset; slot->offset_high = offset_high; slot->io_already_done = FALSE; #ifdef WIN_ASYNC_IO control = &(slot->control); control->Offset = (DWORD)offset; control->OffsetHigh = (DWORD)offset_high; os_event_reset(slot->event); #endif os_mutex_exit(array->mutex); return(slot); } /*******************************************************************//** Frees a slot in the aio array. */ static void os_aio_array_free_slot( /*===================*/ os_aio_array_t* array, /*!< in: aio array */ os_aio_slot_t* slot) /*!< in: pointer to slot */ { ut_ad(array); ut_ad(slot); os_mutex_enter(array->mutex); ut_ad(slot->reserved); slot->reserved = FALSE; array->n_reserved--; if (array->n_reserved == array->n_slots - 1) { os_event_set(array->not_full); } if (array->n_reserved == 0) { os_event_set(array->is_empty); } #ifdef WIN_ASYNC_IO os_event_reset(slot->event); #endif os_mutex_exit(array->mutex); } /**********************************************************************//** Wakes up a simulated aio i/o-handler thread if it has something to do. */ static void os_aio_simulated_wake_handler_thread( /*=================================*/ ulint global_segment) /*!< in: the number of the segment in the aio arrays */ { os_aio_array_t* array; os_aio_slot_t* slot; ulint segment; ulint n; ulint i; ut_ad(!os_aio_use_native_aio); segment = os_aio_get_array_and_local_segment(&array, global_segment); n = array->n_slots / array->n_segments; /* Look through n slots after the segment * n'th slot */ os_mutex_enter(array->mutex); for (i = 0; i < n; i++) { slot = os_aio_array_get_nth_slot(array, i + segment * n); if (slot->reserved) { /* Found an i/o request */ break; } } os_mutex_exit(array->mutex); if (i < n) { os_event_set(os_aio_segment_wait_events[global_segment]); } } /**********************************************************************//** Wakes up simulated aio i/o-handler threads if they have something to do. */ UNIV_INTERN void os_aio_simulated_wake_handler_threads(void) /*=======================================*/ { ulint i; if (os_aio_use_native_aio) { /* We do not use simulated aio: do nothing */ return; } os_aio_recommend_sleep_for_read_threads = FALSE; for (i = 0; i < os_aio_n_segments; i++) { os_aio_simulated_wake_handler_thread(i); } } /**********************************************************************//** This function can be called if one wants to post a batch of reads and prefers an i/o-handler thread to handle them all at once later. You must call os_aio_simulated_wake_handler_threads later to ensure the threads are not left sleeping! */ UNIV_INTERN void os_aio_simulated_put_read_threads_to_sleep(void) /*============================================*/ { os_aio_array_t* array; ulint g; os_aio_recommend_sleep_for_read_threads = TRUE; for (g = 0; g < os_aio_n_segments; g++) { os_aio_get_array_and_local_segment(&array, g); if (array == os_aio_read_array) { os_event_reset(os_aio_segment_wait_events[g]); } } } /*******************************************************************//** Requests an asynchronous i/o operation. @return TRUE if request was queued successfully, FALSE if fail */ UNIV_INTERN ibool os_aio( /*===*/ ulint type, /*!< in: OS_FILE_READ or OS_FILE_WRITE */ ulint mode, /*!< in: OS_AIO_NORMAL, ..., possibly ORed to OS_AIO_SIMULATED_WAKE_LATER: the last flag advises this function not to wake i/o-handler threads, but the caller will do the waking explicitly later, in this way the caller can post several requests in a batch; NOTE that the batch must not be so big that it exhausts the slots in aio arrays! NOTE that a simulated batch may introduce hidden chances of deadlocks, because i/os are not actually handled until all have been posted: use with great caution! */ const char* name, /*!< in: name of the file or path as a null-terminated string */ os_file_t file, /*!< in: handle to a file */ void* buf, /*!< in: buffer where to read or from which to write */ ulint offset, /*!< in: least significant 32 bits of file offset where to read or write */ ulint offset_high, /*!< in: most significant 32 bits of offset */ ulint n, /*!< in: number of bytes to read or write */ fil_node_t* message1,/*!< in: message for the aio handler (can be used to identify a completed aio operation); ignored if mode is OS_AIO_SYNC */ void* message2)/*!< in: message for the aio handler (can be used to identify a completed aio operation); ignored if mode is OS_AIO_SYNC */ { os_aio_array_t* array; os_aio_slot_t* slot; #ifdef WIN_ASYNC_IO ibool retval; BOOL ret = TRUE; DWORD len = (DWORD) n; struct fil_node_struct * dummy_mess1; void* dummy_mess2; ulint dummy_type; #endif ulint err = 0; ibool retry; ulint wake_later; ut_ad(file); ut_ad(buf); ut_ad(n > 0); ut_ad(n % OS_FILE_LOG_BLOCK_SIZE == 0); ut_ad(offset % OS_FILE_LOG_BLOCK_SIZE == 0); ut_ad(os_aio_validate()); wake_later = mode & OS_AIO_SIMULATED_WAKE_LATER; mode = mode & (~OS_AIO_SIMULATED_WAKE_LATER); if (mode == OS_AIO_SYNC #ifdef WIN_ASYNC_IO && !os_aio_use_native_aio #endif ) { /* This is actually an ordinary synchronous read or write: no need to use an i/o-handler thread. NOTE that if we use Windows async i/o, Windows does not allow us to use ordinary synchronous os_file_read etc. on the same file, therefore we have built a special mechanism for synchronous wait in the Windows case. */ if (type == OS_FILE_READ) { return(os_file_read(file, buf, offset, offset_high, n)); } ut_a(type == OS_FILE_WRITE); return(os_file_write(name, file, buf, offset, offset_high, n)); } try_again: if (mode == OS_AIO_NORMAL) { if (type == OS_FILE_READ) { array = os_aio_read_array; } else { array = os_aio_write_array; } } else if (mode == OS_AIO_IBUF) { ut_ad(type == OS_FILE_READ); /* Reduce probability of deadlock bugs in connection with ibuf: do not let the ibuf i/o handler sleep */ wake_later = FALSE; array = os_aio_ibuf_array; } else if (mode == OS_AIO_LOG) { array = os_aio_log_array; } else if (mode == OS_AIO_SYNC) { array = os_aio_sync_array; } else { array = NULL; /* Eliminate compiler warning */ ut_error; } slot = os_aio_array_reserve_slot(type, array, message1, message2, file, name, buf, offset, offset_high, n); if (type == OS_FILE_READ) { if (os_aio_use_native_aio) { #ifdef WIN_ASYNC_IO os_n_file_reads++; os_bytes_read_since_printout += len; ret = ReadFile(file, buf, (DWORD)n, &len, &(slot->control)); #endif } else { if (!wake_later) { os_aio_simulated_wake_handler_thread( os_aio_get_segment_no_from_slot( array, slot)); } } } else if (type == OS_FILE_WRITE) { if (os_aio_use_native_aio) { #ifdef WIN_ASYNC_IO os_n_file_writes++; ret = WriteFile(file, buf, (DWORD)n, &len, &(slot->control)); #endif } else { if (!wake_later) { os_aio_simulated_wake_handler_thread( os_aio_get_segment_no_from_slot( array, slot)); } } } else { ut_error; } #ifdef WIN_ASYNC_IO if (os_aio_use_native_aio) { if ((ret && len == n) || (!ret && GetLastError() == ERROR_IO_PENDING)) { /* aio was queued successfully! */ if (mode == OS_AIO_SYNC) { /* We want a synchronous i/o operation on a file where we also use async i/o: in Windows we must use the same wait mechanism as for async i/o */ retval = os_aio_windows_handle(ULINT_UNDEFINED, slot->pos, &dummy_mess1, &dummy_mess2, &dummy_type); return(retval); } return(TRUE); } err = 1; /* Fall through the next if */ } #endif if (err == 0) { /* aio was queued successfully! */ return(TRUE); } os_aio_array_free_slot(array, slot); retry = os_file_handle_error(name, type == OS_FILE_READ ? "aio read" : "aio write"); if (retry) { goto try_again; } return(FALSE); } #ifdef WIN_ASYNC_IO /**********************************************************************//** This function is only used in Windows asynchronous i/o. Waits for an aio operation to complete. This function is used to wait the for completed requests. The aio array of pending requests is divided into segments. The thread specifies which segment or slot it wants to wait for. NOTE: this function will also take care of freeing the aio slot, therefore no other thread is allowed to do the freeing! @return TRUE if the aio operation succeeded */ UNIV_INTERN ibool os_aio_windows_handle( /*==================*/ ulint segment, /*!< in: the number of the segment in the aio arrays to wait for; segment 0 is the ibuf i/o thread, segment 1 the log i/o thread, then follow the non-ibuf read threads, and as the last are the non-ibuf write threads; if this is ULINT_UNDEFINED, then it means that sync aio is used, and this parameter is ignored */ ulint pos, /*!< this parameter is used only in sync aio: wait for the aio slot at this position */ fil_node_t**message1, /*!< out: the messages passed with the aio request; note that also in the case where the aio operation failed, these output parameters are valid and can be used to restart the operation, for example */ void** message2, ulint* type) /*!< out: OS_FILE_WRITE or ..._READ */ { ulint orig_seg = segment; os_aio_array_t* array; os_aio_slot_t* slot; ulint n; ulint i; ibool ret_val; BOOL ret; DWORD len; if (segment == ULINT_UNDEFINED) { array = os_aio_sync_array; segment = 0; } else { segment = os_aio_get_array_and_local_segment(&array, segment); } /* NOTE! We only access constant fields in os_aio_array. Therefore we do not have to acquire the protecting mutex yet */ ut_ad(os_aio_validate()); ut_ad(segment < array->n_segments); n = array->n_slots / array->n_segments; if (array == os_aio_sync_array) { os_event_wait(os_aio_array_get_nth_slot(array, pos)->event); i = pos; } else { srv_set_io_thread_op_info(orig_seg, "wait Windows aio"); i = os_event_wait_multiple(n, (array->native_events) + segment * n); } os_mutex_enter(array->mutex); slot = os_aio_array_get_nth_slot(array, i + segment * n); ut_a(slot->reserved); if (orig_seg != ULINT_UNDEFINED) { srv_set_io_thread_op_info(orig_seg, "get windows aio return value"); } ret = GetOverlappedResult(slot->file, &(slot->control), &len, TRUE); *message1 = slot->message1; *message2 = slot->message2; *type = slot->type; if (ret && len == slot->len) { ret_val = TRUE; #ifdef UNIV_DO_FLUSH if (slot->type == OS_FILE_WRITE && !os_do_not_call_flush_at_each_write) { ut_a(TRUE == os_file_flush(slot->file)); } #endif /* UNIV_DO_FLUSH */ } else { os_file_handle_error(slot->name, "Windows aio"); ret_val = FALSE; } os_mutex_exit(array->mutex); os_aio_array_free_slot(array, slot); return(ret_val); } #endif /**********************************************************************//** Does simulated aio. This function should be called by an i/o-handler thread. @return TRUE if the aio operation succeeded */ UNIV_INTERN ibool os_aio_simulated_handle( /*====================*/ ulint global_segment, /*!< in: the number of the segment in the aio arrays to wait for; segment 0 is the ibuf i/o thread, segment 1 the log i/o thread, then follow the non-ibuf read threads, and as the last are the non-ibuf write threads */ fil_node_t**message1, /*!< out: the messages passed with the aio request; note that also in the case where the aio operation failed, these output parameters are valid and can be used to restart the operation, for example */ void** message2, ulint* type) /*!< out: OS_FILE_WRITE or ..._READ */ { os_aio_array_t* array; ulint segment; os_aio_slot_t* slot; os_aio_slot_t* slot2; os_aio_slot_t* consecutive_ios[OS_AIO_MERGE_N_CONSECUTIVE]; ulint n_consecutive; ulint total_len; ulint offs; ulint lowest_offset; ulint biggest_age; ulint age; byte* combined_buf; byte* combined_buf2; ibool ret; ulint n; ulint i; memset(consecutive_ios, 0, sizeof(os_aio_slot_t*) * OS_AIO_MERGE_N_CONSECUTIVE); segment = os_aio_get_array_and_local_segment(&array, global_segment); restart: /* NOTE! We only access constant fields in os_aio_array. Therefore we do not have to acquire the protecting mutex yet */ srv_set_io_thread_op_info(global_segment, "looking for i/o requests (a)"); ut_ad(os_aio_validate()); ut_ad(segment < array->n_segments); n = array->n_slots / array->n_segments; /* Look through n slots after the segment * n'th slot */ if (array == os_aio_read_array && os_aio_recommend_sleep_for_read_threads) { /* Give other threads chance to add several i/os to the array at once. */ goto recommended_sleep; } os_mutex_enter(array->mutex); srv_set_io_thread_op_info(global_segment, "looking for i/o requests (b)"); /* Check if there is a slot for which the i/o has already been done */ for (i = 0; i < n; i++) { slot = os_aio_array_get_nth_slot(array, i + segment * n); if (slot->reserved && slot->io_already_done) { if (os_aio_print_debug) { fprintf(stderr, "InnoDB: i/o for slot %lu" " already done, returning\n", (ulong) i); } ret = TRUE; goto slot_io_done; } } n_consecutive = 0; /* If there are at least 2 seconds old requests, then pick the oldest one to prevent starvation. If several requests have the same age, then pick the one at the lowest offset. */ biggest_age = 0; lowest_offset = ULINT_MAX; for (i = 0; i < n; i++) { slot = os_aio_array_get_nth_slot(array, i + segment * n); if (slot->reserved) { age = (ulint)difftime(time(NULL), slot->reservation_time); if ((age >= 2 && age > biggest_age) || (age >= 2 && age == biggest_age && slot->offset < lowest_offset)) { /* Found an i/o request */ consecutive_ios[0] = slot; n_consecutive = 1; biggest_age = age; lowest_offset = slot->offset; } } } if (n_consecutive == 0) { /* There were no old requests. Look for an i/o request at the lowest offset in the array (we ignore the high 32 bits of the offset in these heuristics) */ lowest_offset = ULINT_MAX; for (i = 0; i < n; i++) { slot = os_aio_array_get_nth_slot(array, i + segment * n); if (slot->reserved && slot->offset < lowest_offset) { /* Found an i/o request */ consecutive_ios[0] = slot; n_consecutive = 1; lowest_offset = slot->offset; } } } if (n_consecutive == 0) { /* No i/o requested at the moment */ goto wait_for_io; } slot = consecutive_ios[0]; /* Check if there are several consecutive blocks to read or write */ consecutive_loop: for (i = 0; i < n; i++) { slot2 = os_aio_array_get_nth_slot(array, i + segment * n); if (slot2->reserved && slot2 != slot && slot2->offset == slot->offset + slot->len /* check that sum does not wrap over */ && slot->offset + slot->len > slot->offset && slot2->offset_high == slot->offset_high && slot2->type == slot->type && slot2->file == slot->file) { /* Found a consecutive i/o request */ consecutive_ios[n_consecutive] = slot2; n_consecutive++; slot = slot2; if (n_consecutive < OS_AIO_MERGE_N_CONSECUTIVE) { goto consecutive_loop; } else { break; } } } srv_set_io_thread_op_info(global_segment, "consecutive i/o requests"); /* We have now collected n_consecutive i/o requests in the array; allocate a single buffer which can hold all data, and perform the i/o */ total_len = 0; slot = consecutive_ios[0]; for (i = 0; i < n_consecutive; i++) { total_len += consecutive_ios[i]->len; } if (n_consecutive == 1) { /* We can use the buffer of the i/o request */ combined_buf = slot->buf; combined_buf2 = NULL; } else { combined_buf2 = ut_malloc(total_len + UNIV_PAGE_SIZE); ut_a(combined_buf2); combined_buf = ut_align(combined_buf2, UNIV_PAGE_SIZE); } /* We release the array mutex for the time of the i/o: NOTE that this assumes that there is just one i/o-handler thread serving a single segment of slots! */ os_mutex_exit(array->mutex); if (slot->type == OS_FILE_WRITE && n_consecutive > 1) { /* Copy the buffers to the combined buffer */ offs = 0; for (i = 0; i < n_consecutive; i++) { ut_memcpy(combined_buf + offs, consecutive_ios[i]->buf, consecutive_ios[i]->len); offs += consecutive_ios[i]->len; } } srv_set_io_thread_op_info(global_segment, "doing file i/o"); if (os_aio_print_debug) { fprintf(stderr, "InnoDB: doing i/o of type %lu at offset %lu %lu," " length %lu\n", (ulong) slot->type, (ulong) slot->offset_high, (ulong) slot->offset, (ulong) total_len); } /* Do the i/o with ordinary, synchronous i/o functions: */ if (slot->type == OS_FILE_WRITE) { ret = os_file_write(slot->name, slot->file, combined_buf, slot->offset, slot->offset_high, total_len); } else { ret = os_file_read(slot->file, combined_buf, slot->offset, slot->offset_high, total_len); } ut_a(ret); srv_set_io_thread_op_info(global_segment, "file i/o done"); #if 0 fprintf(stderr, "aio: %lu consecutive %lu:th segment, first offs %lu blocks\n", n_consecutive, global_segment, slot->offset / UNIV_PAGE_SIZE); #endif if (slot->type == OS_FILE_READ && n_consecutive > 1) { /* Copy the combined buffer to individual buffers */ offs = 0; for (i = 0; i < n_consecutive; i++) { ut_memcpy(consecutive_ios[i]->buf, combined_buf + offs, consecutive_ios[i]->len); offs += consecutive_ios[i]->len; } } if (combined_buf2) { ut_free(combined_buf2); } os_mutex_enter(array->mutex); /* Mark the i/os done in slots */ for (i = 0; i < n_consecutive; i++) { consecutive_ios[i]->io_already_done = TRUE; } /* We return the messages for the first slot now, and if there were several slots, the messages will be returned with subsequent calls of this function */ slot_io_done: ut_a(slot->reserved); *message1 = slot->message1; *message2 = slot->message2; *type = slot->type; os_mutex_exit(array->mutex); os_aio_array_free_slot(array, slot); return(ret); wait_for_io: srv_set_io_thread_op_info(global_segment, "resetting wait event"); /* We wait here until there again can be i/os in the segment of this thread */ os_event_reset(os_aio_segment_wait_events[global_segment]); os_mutex_exit(array->mutex); recommended_sleep: srv_set_io_thread_op_info(global_segment, "waiting for i/o request"); os_event_wait(os_aio_segment_wait_events[global_segment]); if (os_aio_print_debug) { fprintf(stderr, "InnoDB: i/o handler thread for i/o" " segment %lu wakes up\n", (ulong) global_segment); } goto restart; } /**********************************************************************//** Validates the consistency of an aio array. @return TRUE if ok */ static ibool os_aio_array_validate( /*==================*/ os_aio_array_t* array) /*!< in: aio wait array */ { os_aio_slot_t* slot; ulint n_reserved = 0; ulint i; ut_a(array); os_mutex_enter(array->mutex); ut_a(array->n_slots > 0); ut_a(array->n_segments > 0); for (i = 0; i < array->n_slots; i++) { slot = os_aio_array_get_nth_slot(array, i); if (slot->reserved) { n_reserved++; ut_a(slot->len > 0); } } ut_a(array->n_reserved == n_reserved); os_mutex_exit(array->mutex); return(TRUE); } /**********************************************************************//** Validates the consistency the aio system. @return TRUE if ok */ UNIV_INTERN ibool os_aio_validate(void) /*=================*/ { os_aio_array_validate(os_aio_read_array); os_aio_array_validate(os_aio_write_array); os_aio_array_validate(os_aio_ibuf_array); os_aio_array_validate(os_aio_log_array); os_aio_array_validate(os_aio_sync_array); return(TRUE); } /**********************************************************************//** Prints info of the aio arrays. */ UNIV_INTERN void os_aio_print( /*=========*/ FILE* file) /*!< in: file where to print */ { os_aio_array_t* array; os_aio_slot_t* slot; ulint n_reserved; time_t current_time; double time_elapsed; double avg_bytes_read; ulint i; for (i = 0; i < srv_n_file_io_threads; i++) { fprintf(file, "I/O thread %lu state: %s (%s)", (ulong) i, srv_io_thread_op_info[i], srv_io_thread_function[i]); #ifndef __WIN__ if (os_aio_segment_wait_events[i]->is_set) { fprintf(file, " ev set"); } #endif fprintf(file, "\n"); } fputs("Pending normal aio reads:", file); array = os_aio_read_array; loop: ut_a(array); os_mutex_enter(array->mutex); ut_a(array->n_slots > 0); ut_a(array->n_segments > 0); n_reserved = 0; for (i = 0; i < array->n_slots; i++) { slot = os_aio_array_get_nth_slot(array, i); if (slot->reserved) { n_reserved++; #if 0 fprintf(stderr, "Reserved slot, messages %p %p\n", (void*) slot->message1, (void*) slot->message2); #endif ut_a(slot->len > 0); } } ut_a(array->n_reserved == n_reserved); fprintf(file, " %lu", (ulong) n_reserved); os_mutex_exit(array->mutex); if (array == os_aio_read_array) { fputs(", aio writes:", file); array = os_aio_write_array; goto loop; } if (array == os_aio_write_array) { fputs(",\n ibuf aio reads:", file); array = os_aio_ibuf_array; goto loop; } if (array == os_aio_ibuf_array) { fputs(", log i/o's:", file); array = os_aio_log_array; goto loop; } if (array == os_aio_log_array) { fputs(", sync i/o's:", file); array = os_aio_sync_array; goto loop; } putc('\n', file); current_time = time(NULL); time_elapsed = 0.001 + difftime(current_time, os_last_printout); fprintf(file, "Pending flushes (fsync) log: %lu; buffer pool: %lu\n" "%lu OS file reads, %lu OS file writes, %lu OS fsyncs\n", (ulong) fil_n_pending_log_flushes, (ulong) fil_n_pending_tablespace_flushes, (ulong) os_n_file_reads, (ulong) os_n_file_writes, (ulong) os_n_fsyncs); if (os_file_n_pending_preads != 0 || os_file_n_pending_pwrites != 0) { fprintf(file, "%lu pending preads, %lu pending pwrites\n", (ulong) os_file_n_pending_preads, (ulong) os_file_n_pending_pwrites); } if (os_n_file_reads == os_n_file_reads_old) { avg_bytes_read = 0.0; } else { avg_bytes_read = (double) os_bytes_read_since_printout / (os_n_file_reads - os_n_file_reads_old); } fprintf(file, "%.2f reads/s, %lu avg bytes/read," " %.2f writes/s, %.2f fsyncs/s\n", (os_n_file_reads - os_n_file_reads_old) / time_elapsed, (ulong)avg_bytes_read, (os_n_file_writes - os_n_file_writes_old) / time_elapsed, (os_n_fsyncs - os_n_fsyncs_old) / time_elapsed); os_n_file_reads_old = os_n_file_reads; os_n_file_writes_old = os_n_file_writes; os_n_fsyncs_old = os_n_fsyncs; os_bytes_read_since_printout = 0; os_last_printout = current_time; } /**********************************************************************//** Refreshes the statistics used to print per-second averages. */ UNIV_INTERN void os_aio_refresh_stats(void) /*======================*/ { os_n_file_reads_old = os_n_file_reads; os_n_file_writes_old = os_n_file_writes; os_n_fsyncs_old = os_n_fsyncs; os_bytes_read_since_printout = 0; os_last_printout = time(NULL); } #ifdef UNIV_DEBUG /**********************************************************************//** Checks that all slots in the system have been freed, that is, there are no pending io operations. @return TRUE if all free */ UNIV_INTERN ibool os_aio_all_slots_free(void) /*=======================*/ { os_aio_array_t* array; ulint n_res = 0; array = os_aio_read_array; os_mutex_enter(array->mutex); n_res += array->n_reserved; os_mutex_exit(array->mutex); array = os_aio_write_array; os_mutex_enter(array->mutex); n_res += array->n_reserved; os_mutex_exit(array->mutex); array = os_aio_ibuf_array; os_mutex_enter(array->mutex); n_res += array->n_reserved; os_mutex_exit(array->mutex); array = os_aio_log_array; os_mutex_enter(array->mutex); n_res += array->n_reserved; os_mutex_exit(array->mutex); array = os_aio_sync_array; os_mutex_enter(array->mutex); n_res += array->n_reserved; os_mutex_exit(array->mutex); if (n_res == 0) { return(TRUE); } return(FALSE); } #endif /* UNIV_DEBUG */ #endif /* !UNIV_HOTBACKUP */