198
180
throw ErrorStringNotFound();
182
return pos->second.second;
185
#define ADD_ERROR_MESSAGE(code, msg) add(code, STRINGIFY_ARG(code), msg)
204
186
// Constructor sets the default mappings.
205
187
ErrorMap::ErrorMap()
207
add(ER_NO, N_("NO"));
208
add(ER_YES, N_("YES"));
209
add(ER_CANT_CREATE_FILE, N_("Can't create file '%-.200s' (errno: %d)"));
210
add(ER_CANT_CREATE_TABLE, N_("Can't create table '%-.200s' (errno: %d)"));
211
add(ER_CANT_CREATE_DB, N_("Can't create schema '%-.192s' (errno: %d)"));
212
add(ER_DB_CREATE_EXISTS, N_("Can't create schema '%-.192s'; schema exists"));
213
add(ER_DB_DROP_EXISTS, N_("Can't drop schema '%-.192s'; schema doesn't exist"));
214
add(ER_CANT_DELETE_FILE, N_("Error on delete of '%-.192s' (errno: %d)"));
215
add(ER_CANT_GET_STAT, N_("Can't get status of '%-.200s' (errno: %d)"));
216
add(ER_CANT_LOCK, N_("Can't lock file (errno: %d)"));
217
add(ER_CANT_OPEN_FILE, N_("Can't open file: '%-.200s' (errno: %d)"));
218
add(ER_FILE_NOT_FOUND, N_("Can't find file: '%-.200s' (errno: %d)"));
219
add(ER_CANT_READ_DIR, N_("Can't read dir of '%-.192s' (errno: %d)"));
220
add(ER_CHECKREAD, N_("Record has changed since last read in table '%-.192s'"));
221
add(ER_DISK_FULL, N_("Disk full (%s); waiting for someone to free some space..."));
222
add(ER_DUP_KEY, N_("Can't write; duplicate key in table '%-.192s'"));
223
add(ER_ERROR_ON_CLOSE, N_("Error on close of '%-.192s' (errno: %d)"));
224
add(ER_ERROR_ON_READ, N_("Error reading file '%-.200s' (errno: %d)"));
225
add(ER_ERROR_ON_RENAME, N_("Error on rename of '%-.150s' to '%-.150s' (errno: %d)"));
226
add(ER_ERROR_ON_WRITE, N_("Error writing file '%-.200s' (errno: %d)"));
227
add(ER_FILE_USED, N_("'%-.192s' is locked against change"));
228
add(ER_FILSORT_ABORT, N_("Sort aborted"));
229
add(ER_GET_ERRNO, N_("Got error %d from storage engine"));
230
add(ER_ILLEGAL_HA, N_("Table storage engine for '%-.192s' doesn't have this option"));
231
add(ER_KEY_NOT_FOUND, N_("Can't find record in '%-.192s'"));
232
add(ER_NOT_FORM_FILE, N_("Incorrect information in file: '%-.200s'"));
233
add(ER_NOT_KEYFILE, N_("Incorrect key file for table '%-.200s'; try to repair it"));
234
add(ER_OLD_KEYFILE, N_("Old key file for table '%-.192s'; repair it!"));
235
add(ER_OPEN_AS_READONLY, N_("Table '%-.192s' is read only"));
236
add(ER_OUTOFMEMORY, N_("Out of memory; restart server and try again (needed %lu bytes)"));
237
add(ER_OUT_OF_SORTMEMORY, N_("Out of sort memory; increase server sort buffer size"));
238
add(ER_OUT_OF_GLOBAL_SORTMEMORY, N_("Global sort memory constraint hit; increase sort-heap-threshold"));
239
add(ER_OUT_OF_GLOBAL_JOINMEMORY, N_("Global join memory constraint hit; increase join-heap-threshold"));
240
add(ER_OUT_OF_GLOBAL_READRNDMEMORY, N_("Global read_rnd memory constraint hit; increase read-rnd-heap-threshold"));
241
add(ER_OUT_OF_GLOBAL_READMEMORY, N_("Global read memory constraint hit; increase read-buffer-threshold"));
242
add(ER_UNEXPECTED_EOF, N_("Unexpected EOF found when reading file '%-.192s' (errno: %d)"));
243
add(ER_CON_COUNT_ERROR, N_("Too many connections"));
244
add(ER_OUT_OF_RESOURCES, N_("Out of memory; check if drizzled or some other process uses all available memory; if not, you may have to use 'ulimit' to allow drizzled to use more memory or you can add more swap space"));
245
add(ER_BAD_HOST_ERROR, N_("Can't get hostname for your address"));
246
add(ER_HANDSHAKE_ERROR, N_("Bad handshake"));
247
add(ER_DBACCESS_DENIED_ERROR, N_("Access denied for user '%-.48s'@'%-.64s' to schema '%-.192s'"));
248
add(ER_ACCESS_DENIED_ERROR, N_("Access denied for user '%-.48s'@'%-.64s' (using password: %s)"));
249
add(ER_NO_DB_ERROR, N_("No schema selected"));
250
add(ER_UNKNOWN_COM_ERROR, N_("Unknown command"));
251
add(ER_BAD_NULL_ERROR, N_("Column '%-.192s' cannot be null"));
252
add(ER_BAD_DB_ERROR, N_("Unknown schema '%-.192s'"));
253
add(ER_TABLE_EXISTS_ERROR, N_("Table '%-.192s' already exists"));
254
add(ER_BAD_TABLE_ERROR, N_("Unknown table '%-.100s'"));
255
add(ER_NON_UNIQ_ERROR, N_("Column '%-.192s' in %-.192s is ambiguous"));
256
add(ER_SERVER_SHUTDOWN, N_("Server shutdown in progress"));
257
add(ER_BAD_FIELD_ERROR, N_("Unknown column '%-.192s' in '%-.192s'"));
258
add(ER_WRONG_FIELD_WITH_GROUP, N_("'%-.192s' isn't in GROUP BY"));
259
add(ER_WRONG_GROUP_FIELD, N_("Can't group on '%-.192s'"));
260
add(ER_WRONG_SUM_SELECT, N_("Statement has sum functions and columns in same statement"));
261
add(ER_WRONG_VALUE_COUNT, N_("Column count doesn't match value count"));
262
add(ER_TOO_LONG_IDENT, N_("Identifier name '%-.100s' is too long"));
263
add(ER_DUP_FIELDNAME, N_("Duplicate column name '%-.192s'"));
264
add(ER_DUP_KEYNAME, N_("Duplicate key name '%-.192s'"));
265
add(ER_DUP_ENTRY, N_("Duplicate entry '%-.192s' for key %d"));
266
add(ER_WRONG_FIELD_SPEC, N_("Incorrect column specifier for column '%-.192s'"));
267
add(ER_PARSE_ERROR, N_("%s near '%-.80s' at line %d"));
268
add(ER_EMPTY_QUERY, N_("Query was empty"));
269
add(ER_NONUNIQ_TABLE, N_("Not unique table/alias: '%-.192s'"));
270
add(ER_INVALID_DEFAULT, N_("Invalid default value for '%-.192s'"));
271
add(ER_MULTIPLE_PRI_KEY, N_("Multiple primary key defined"));
272
add(ER_TOO_MANY_KEYS, N_("Too many keys specified; max %d keys allowed"));
273
add(ER_TOO_MANY_KEY_PARTS, N_("Too many key parts specified; max %d parts allowed"));
274
add(ER_TOO_LONG_KEY, N_("Specified key was too long; max key length is %d bytes"));
275
add(ER_KEY_COLUMN_DOES_NOT_EXITS, N_("Key column '%-.192s' doesn't exist in table"));
276
add(ER_BLOB_USED_AS_KEY, N_("BLOB column '%-.192s' can't be used in key specification with the used table type"));
277
add(ER_TOO_BIG_FIELDLENGTH, N_("Column length too big for column '%-.192s' (max = %d); use BLOB or TEXT instead"));
278
add(ER_WRONG_AUTO_KEY, N_("Incorrect table definition; there can be only one auto column and it must be defined as a key"));
279
add(ER_NORMAL_SHUTDOWN, N_("%s: Normal shutdown\n"));
280
add(ER_GOT_SIGNAL, N_("%s: Got signal %d. Aborting!\n"));
281
add(ER_SHUTDOWN_COMPLETE, N_("%s: Shutdown complete\n"));
282
add(ER_FORCING_CLOSE, N_("%s: Forcing close of thread %" PRIu64 " user: '%-.48s'\n"));
283
add(ER_IPSOCK_ERROR, N_("Can't create IP socket"));
284
add(ER_NO_SUCH_INDEX, N_("Table '%-.192s' has no index like the one used in CREATE INDEX; recreate the table"));
285
add(ER_WRONG_FIELD_TERMINATORS, N_("Field separator argument '%-.32s' with length '%d' is not what is expected; check the manual"));
286
add(ER_BLOBS_AND_NO_TERMINATED, N_("You can't use fixed rowlength with BLOBs; please use 'fields terminated by'"));
287
add(ER_TEXTFILE_NOT_READABLE, N_("The file '%-.128s' must be in the schema directory or be readable by all"));
288
add(ER_FILE_EXISTS_ERROR, N_("File '%-.200s' already exists"));
289
add(ER_LOAD_INFO, N_("Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld"));
290
add(ER_WRONG_SUB_KEY, N_("Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys"));
291
add(ER_CANT_REMOVE_ALL_FIELDS, N_("You can't delete all columns with ALTER TABLE; use DROP TABLE instead"));
292
add(ER_CANT_DROP_FIELD_OR_KEY, N_("Can't DROP '%-.192s'; check that column/key exists"));
293
add(ER_INSERT_INFO, N_("Records: %ld Duplicates: %ld Warnings: %ld"));
294
add(ER_UPDATE_TABLE_USED, N_("You can't specify target table '%-.192s' for update in FROM clause"));
189
ADD_ERROR_MESSAGE(ER_NO, N_("NO"));
190
ADD_ERROR_MESSAGE(ER_YES, N_("YES"));
191
ADD_ERROR_MESSAGE(ER_CANT_CREATE_FILE, N_("Can't create file '%-.200s' (errno: %d)"));
192
ADD_ERROR_MESSAGE(ER_CANT_CREATE_TABLE, N_("Can't create table '%-.200s' (errno: %d)"));
193
ADD_ERROR_MESSAGE(ER_CANT_CREATE_DB, N_("Can't create schema '%-.192s' (errno: %d)"));
194
ADD_ERROR_MESSAGE(ER_DB_CREATE_EXISTS, N_("Can't create schema '%-.192s'; schema exists"));
195
ADD_ERROR_MESSAGE(ER_DB_DROP_EXISTS, N_("Can't drop schema '%-.192s'; schema doesn't exist"));
196
ADD_ERROR_MESSAGE(ER_CANT_DELETE_FILE, N_("Error on delete of '%-.192s' (errno: %d)"));
197
ADD_ERROR_MESSAGE(ER_CANT_GET_STAT, N_("Can't get status of '%-.200s' (errno: %d)"));
198
ADD_ERROR_MESSAGE(ER_CANT_LOCK, N_("Can't lock file (errno: %d)"));
199
ADD_ERROR_MESSAGE(ER_CANT_OPEN_FILE, N_("Can't open file: '%-.200s' (errno: %d)"));
200
ADD_ERROR_MESSAGE(ER_FILE_NOT_FOUND, N_("Can't find file: '%-.200s' (errno: %d)"));
201
ADD_ERROR_MESSAGE(ER_CANT_READ_DIR, N_("Can't read dir of '%-.192s' (errno: %d)"));
202
ADD_ERROR_MESSAGE(ER_CHECKREAD, N_("Record has changed since last read in table '%-.192s'"));
203
ADD_ERROR_MESSAGE(ER_DISK_FULL, N_("Disk full (%s); waiting for someone to free some space..."));
204
ADD_ERROR_MESSAGE(ER_DUP_KEY, N_("Can't write; duplicate key in table '%-.192s'"));
205
ADD_ERROR_MESSAGE(ER_ERROR_ON_CLOSE, N_("Error on close of '%-.192s' (errno: %d)"));
206
ADD_ERROR_MESSAGE(ER_ERROR_ON_READ, N_("Error reading file '%-.200s' (errno: %d)"));
207
ADD_ERROR_MESSAGE(ER_ERROR_ON_RENAME, N_("Error on rename of '%-.150s' to '%-.150s' (errno: %d)"));
208
ADD_ERROR_MESSAGE(ER_ERROR_ON_WRITE, N_("Error writing file '%-.200s' (errno: %d)"));
209
ADD_ERROR_MESSAGE(ER_FILE_USED, N_("'%-.192s' is locked against change"));
210
ADD_ERROR_MESSAGE(ER_FILSORT_ABORT, N_("Sort aborted"));
211
ADD_ERROR_MESSAGE(ER_GET_ERRNO, N_("Got error %d from storage engine"));
212
ADD_ERROR_MESSAGE(ER_ILLEGAL_HA, N_("Table storage engine for '%-.192s' doesn't have this option"));
213
ADD_ERROR_MESSAGE(ER_KEY_NOT_FOUND, N_("Can't find record in '%-.192s'"));
214
ADD_ERROR_MESSAGE(ER_NOT_FORM_FILE, N_("Incorrect information in file: '%-.200s'"));
215
ADD_ERROR_MESSAGE(ER_NOT_KEYFILE, N_("Incorrect key file for table '%-.200s'; try to repair it"));
216
ADD_ERROR_MESSAGE(ER_OLD_KEYFILE, N_("Old key file for table '%-.192s'; repair it!"));
217
ADD_ERROR_MESSAGE(ER_OPEN_AS_READONLY, N_("Table '%-.192s' is read only"));
218
ADD_ERROR_MESSAGE(ER_OUTOFMEMORY, N_("Out of memory; restart server and try again (needed %lu bytes)"));
219
ADD_ERROR_MESSAGE(ER_OUT_OF_SORTMEMORY, N_("Out of sort memory; increase server sort buffer size"));
220
ADD_ERROR_MESSAGE(ER_OUT_OF_GLOBAL_SORTMEMORY, N_("Global sort memory constraint hit; increase sort-heap-threshold"));
221
ADD_ERROR_MESSAGE(ER_OUT_OF_GLOBAL_JOINMEMORY, N_("Global join memory constraint hit; increase join-heap-threshold"));
222
ADD_ERROR_MESSAGE(ER_OUT_OF_GLOBAL_READRNDMEMORY, N_("Global read_rnd memory constraint hit; increase read-rnd-heap-threshold"));
223
ADD_ERROR_MESSAGE(ER_OUT_OF_GLOBAL_READMEMORY, N_("Global read memory constraint hit; increase read-buffer-threshold"));
224
ADD_ERROR_MESSAGE(ER_UNEXPECTED_EOF, N_("Unexpected EOF found when reading file '%-.192s' (errno: %d)"));
225
ADD_ERROR_MESSAGE(ER_CON_COUNT_ERROR, N_("Too many connections"));
226
ADD_ERROR_MESSAGE(ER_OUT_OF_RESOURCES, N_("Out of memory; check if drizzled or some other process uses all available memory; if not, you may have to use 'ulimit' to allow drizzled to use more memory or you can add more swap space"));
227
ADD_ERROR_MESSAGE(ER_BAD_HOST_ERROR, N_("Can't get hostname for your address"));
228
ADD_ERROR_MESSAGE(ER_HANDSHAKE_ERROR, N_("Bad handshake"));
229
ADD_ERROR_MESSAGE(ER_DBACCESS_DENIED_ERROR, N_("Access denied for user '%-.48s'@'%-.64s' to schema '%-.192s'"));
230
ADD_ERROR_MESSAGE(ER_ACCESS_DENIED_ERROR, N_("Access denied for user '%-.48s'@'%-.64s' (using password: %s)"));
231
ADD_ERROR_MESSAGE(ER_NO_DB_ERROR, N_("No schema selected"));
232
ADD_ERROR_MESSAGE(ER_UNKNOWN_COM_ERROR, N_("Unknown command"));
233
ADD_ERROR_MESSAGE(ER_BAD_NULL_ERROR, N_("Column '%-.192s' cannot be null"));
234
ADD_ERROR_MESSAGE(ER_BAD_DB_ERROR, N_("Unknown schema '%-.192s'"));
235
ADD_ERROR_MESSAGE(ER_TABLE_EXISTS_ERROR, N_("Table '%-.192s' already exists"));
236
ADD_ERROR_MESSAGE(ER_BAD_TABLE_ERROR, N_("Unknown table '%-.100s'"));
237
ADD_ERROR_MESSAGE(ER_NON_UNIQ_ERROR, N_("Column '%-.192s' in %-.192s is ambiguous"));
238
ADD_ERROR_MESSAGE(ER_SERVER_SHUTDOWN, N_("Server shutdown in progress"));
239
ADD_ERROR_MESSAGE(ER_BAD_FIELD_ERROR, N_("Unknown column '%-.192s' in '%-.192s'"));
240
ADD_ERROR_MESSAGE(ER_WRONG_FIELD_WITH_GROUP, N_("'%-.192s' isn't in GROUP BY"));
241
ADD_ERROR_MESSAGE(ER_WRONG_GROUP_FIELD, N_("Can't group on '%-.192s'"));
242
ADD_ERROR_MESSAGE(ER_WRONG_SUM_SELECT, N_("Statement has sum functions and columns in same statement"));
243
ADD_ERROR_MESSAGE(ER_WRONG_VALUE_COUNT, N_("Column count doesn't match value count"));
244
ADD_ERROR_MESSAGE(ER_TOO_LONG_IDENT, N_("Identifier name '%-.100s' is too long"));
245
ADD_ERROR_MESSAGE(ER_DUP_FIELDNAME, N_("Duplicate column name '%-.192s'"));
246
ADD_ERROR_MESSAGE(ER_DUP_KEYNAME, N_("Duplicate key name '%-.192s'"));
247
ADD_ERROR_MESSAGE(ER_DUP_ENTRY, N_("Duplicate entry '%-.192s' for key %d"));
248
ADD_ERROR_MESSAGE(ER_WRONG_FIELD_SPEC, N_("Incorrect column specifier for column '%-.192s'"));
249
ADD_ERROR_MESSAGE(ER_PARSE_ERROR, N_("%s near '%-.80s' at line %d"));
250
ADD_ERROR_MESSAGE(ER_EMPTY_QUERY, N_("Query was empty"));
251
ADD_ERROR_MESSAGE(ER_NONUNIQ_TABLE, N_("Not unique table/alias: '%-.192s'"));
252
ADD_ERROR_MESSAGE(ER_INVALID_DEFAULT, N_("Invalid default value for '%-.192s'"));
253
ADD_ERROR_MESSAGE(ER_MULTIPLE_PRI_KEY, N_("Multiple primary key defined"));
254
ADD_ERROR_MESSAGE(ER_TOO_MANY_KEYS, N_("Too many keys specified; max %d keys allowed"));
255
ADD_ERROR_MESSAGE(ER_TOO_MANY_KEY_PARTS, N_("Too many key parts specified; max %d parts allowed"));
256
ADD_ERROR_MESSAGE(ER_TOO_LONG_KEY, N_("Specified key was too long; max key length is %d bytes"));
257
ADD_ERROR_MESSAGE(ER_KEY_COLUMN_DOES_NOT_EXITS, N_("Key column '%-.192s' doesn't exist in table"));
258
ADD_ERROR_MESSAGE(ER_BLOB_USED_AS_KEY, N_("BLOB column '%-.192s' can't be used in key specification with the used table type"));
259
ADD_ERROR_MESSAGE(ER_TOO_BIG_FIELDLENGTH, N_("Column length too big for column '%-.192s' (max = %d); use BLOB or TEXT instead"));
260
ADD_ERROR_MESSAGE(ER_WRONG_AUTO_KEY, N_("Incorrect table definition; there can be only one auto column and it must be defined as a key"));
261
ADD_ERROR_MESSAGE(ER_NORMAL_SHUTDOWN, N_("%s: Normal shutdown\n"));
262
ADD_ERROR_MESSAGE(ER_GOT_SIGNAL, N_("%s: Got signal %d. Aborting!\n"));
263
ADD_ERROR_MESSAGE(ER_SHUTDOWN_COMPLETE, N_("%s: Shutdown complete\n"));
264
ADD_ERROR_MESSAGE(ER_FORCING_CLOSE, N_("%s: Forcing close of thread %" PRIu64 " user: '%-.48s'\n"));
265
ADD_ERROR_MESSAGE(ER_IPSOCK_ERROR, N_("Can't create IP socket"));
266
ADD_ERROR_MESSAGE(ER_NO_SUCH_INDEX, N_("Table '%-.192s' has no index like the one used in CREATE INDEX; recreate the table"));
267
ADD_ERROR_MESSAGE(ER_WRONG_FIELD_TERMINATORS, N_("Field separator argument '%-.32s' with length '%d' is not what is expected; check the manual"));
268
ADD_ERROR_MESSAGE(ER_BLOBS_AND_NO_TERMINATED, N_("You can't use fixed rowlength with BLOBs; please use 'fields terminated by'"));
269
ADD_ERROR_MESSAGE(ER_TEXTFILE_NOT_READABLE, N_("The file '%-.128s' must be in the schema directory or be readable by all"));
270
ADD_ERROR_MESSAGE(ER_FILE_EXISTS_ERROR, N_("File '%-.200s' already exists"));
271
ADD_ERROR_MESSAGE(ER_LOAD_INFO, N_("Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld"));
272
ADD_ERROR_MESSAGE(ER_WRONG_SUB_KEY, N_("Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys"));
273
ADD_ERROR_MESSAGE(ER_CANT_REMOVE_ALL_FIELDS, N_("You can't delete all columns with ALTER TABLE; use DROP TABLE instead"));
274
ADD_ERROR_MESSAGE(ER_CANT_DROP_FIELD_OR_KEY, N_("Can't DROP '%-.192s'; check that column/key exists"));
275
ADD_ERROR_MESSAGE(ER_INSERT_INFO, N_("Records: %ld Duplicates: %ld Warnings: %ld"));
276
ADD_ERROR_MESSAGE(ER_UPDATE_TABLE_USED, N_("You can't specify target table '%-.192s' for update in FROM clause"));
296
278
// KILL session errors
297
add(ER_NO_SUCH_THREAD, N_("Unknown session id: %lu"));
298
add(ER_KILL_DENIED_ERROR, N_("You are not the owner of session %lu"));
299
add(ER_KILL_DENY_SELF_ERROR, N_("You cannot kill the session you are connected from."));
302
add(ER_NO_TABLES_USED, N_("No tables used"));
303
add(ER_BLOB_CANT_HAVE_DEFAULT, N_("BLOB/TEXT column '%-.192s' can't have a default value"));
304
add(ER_WRONG_DB_NAME, N_("Incorrect schema name '%-.100s'"));
305
add(ER_WRONG_TABLE_NAME, N_("Incorrect table name '%-.100s'"));
306
add(ER_TOO_BIG_SELECT, N_("The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay"));
307
add(ER_UNKNOWN_ERROR, N_("Unknown error"));
308
add(ER_UNKNOWN_PROCEDURE, N_("Unknown procedure '%-.192s'"));
309
add(ER_WRONG_PARAMCOUNT_TO_PROCEDURE, N_("Incorrect parameter count to procedure '%-.192s'"));
310
add(ER_UNKNOWN_TABLE, N_("Unknown table '%-.192s' in %-.32s"));
311
add(ER_FIELD_SPECIFIED_TWICE, N_("Column '%-.192s' specified twice"));
312
add(ER_INVALID_GROUP_FUNC_USE, N_("Invalid use of group function"));
313
add(ER_UNSUPPORTED_EXTENSION, N_("Table '%-.192s' uses an extension that doesn't exist in this Drizzle version"));
314
add(ER_TABLE_MUST_HAVE_COLUMNS, N_("A table must have at least 1 column"));
315
add(ER_RECORD_FILE_FULL, N_("The table '%-.192s' is full"));
316
add(ER_TOO_MANY_TABLES, N_("Too many tables; Drizzle can only use %d tables in a join"));
317
add(ER_TOO_MANY_FIELDS, N_("Too many columns"));
318
add(ER_TOO_BIG_ROWSIZE, N_("Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"));
319
add(ER_WRONG_OUTER_JOIN, N_("Cross dependency found in OUTER JOIN; examine your ON conditions"));
320
add(ER_NULL_COLUMN_IN_INDEX, N_("Table handler doesn't support NULL in given index. Please change column '%-.192s' to be NOT NULL or use another handler"));
321
add(ER_PLUGIN_NO_PATHS, N_("No paths allowed for plugin library"));
322
add(ER_PLUGIN_EXISTS, N_("Plugin '%-.192s' already exists"));
323
add(ER_CANT_OPEN_LIBRARY, N_("Can't open shared library '%-.192s' (errno: %d %-.128s)"));
324
add(ER_CANT_FIND_DL_ENTRY, N_("Can't find symbol '%-.128s' in library '%-.128s'"));
325
add(ER_UPDATE_INFO, N_("Rows matched: %ld Changed: %ld Warnings: %ld"));
326
add(ER_CANT_CREATE_THREAD, N_("Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug"));
327
add(ER_WRONG_VALUE_COUNT_ON_ROW, N_("Column count doesn't match value count at row %ld"));
328
add(ER_CANT_REOPEN_TABLE, N_("Can't reopen table: '%-.192s'"));
329
add(ER_MIX_OF_GROUP_FUNC_AND_FIELDS, N_("Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause"));
330
add(ER_NO_SUCH_TABLE, N_("Table '%-.192s.%-.192s' doesn't exist"));
331
add(ER_SYNTAX_ERROR, N_("You have an error in your SQL syntax; check the manual that corresponds to your Drizzle server version for the right syntax to use"));
332
add(ER_NET_PACKET_TOO_LARGE, N_("Got a packet bigger than 'max_allowed_packet' bytes"));
333
add(ER_NET_PACKETS_OUT_OF_ORDER, N_("Got packets out of order"));
334
add(ER_TABLE_CANT_HANDLE_BLOB, N_("The used table type doesn't support BLOB/TEXT columns"));
335
add(ER_TABLE_CANT_HANDLE_AUTO_INCREMENT, N_("The used table type doesn't support AUTO_INCREMENT columns"));
336
add(ER_WRONG_COLUMN_NAME, N_("Incorrect column name '%-.100s'"));
337
add(ER_WRONG_KEY_COLUMN, N_("The used storage engine can't index column '%-.192s'"));
338
add(ER_WRONG_MRG_TABLE, N_("Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist"));
339
add(ER_DUP_UNIQUE, N_("Can't write, because of unique constraint, to table '%-.192s'"));
340
add(ER_BLOB_KEY_WITHOUT_LENGTH, N_("BLOB/TEXT column '%-.192s' used in key specification without a key length"));
341
add(ER_PRIMARY_CANT_HAVE_NULL, N_("All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead"));
342
add(ER_TOO_MANY_ROWS, N_("Result consisted of more than one row"));
343
add(ER_REQUIRES_PRIMARY_KEY, N_("This table type requires a primary key"));
344
add(ER_KEY_DOES_NOT_EXITS, N_("Key '%-.192s' doesn't exist in table '%-.192s'"));
345
add(ER_CHECK_NO_SUCH_TABLE, N_("Can't open table"));
346
add(ER_CHECK_NOT_IMPLEMENTED, N_("The storage engine for the table doesn't support %s"));
347
add(ER_ERROR_DURING_COMMIT, N_("Got error %d during COMMIT"));
348
add(ER_ERROR_DURING_ROLLBACK, N_("Got error %d during ROLLBACK"));
279
ADD_ERROR_MESSAGE(ER_NO_SUCH_THREAD, N_("Unknown session id: %lu"));
280
ADD_ERROR_MESSAGE(ER_KILL_DENIED_ERROR, N_("You are not the owner of session %lu"));
281
ADD_ERROR_MESSAGE(ER_KILL_DENY_SELF_ERROR, N_("You cannot kill the session you are connected from."));
284
ADD_ERROR_MESSAGE(ER_NO_TABLES_USED, N_("No tables used"));
285
ADD_ERROR_MESSAGE(ER_BLOB_CANT_HAVE_DEFAULT, N_("BLOB/TEXT column '%-.192s' can't have a default value"));
286
ADD_ERROR_MESSAGE(ER_WRONG_DB_NAME, N_("Incorrect schema name '%-.100s'"));
287
ADD_ERROR_MESSAGE(ER_WRONG_TABLE_NAME, N_("Incorrect table name '%-.100s'"));
288
ADD_ERROR_MESSAGE(ER_TOO_BIG_SELECT, N_("The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay"));
289
ADD_ERROR_MESSAGE(ER_UNKNOWN_ERROR, N_("Unknown error"));
290
ADD_ERROR_MESSAGE(ER_UNKNOWN_PROCEDURE, N_("Unknown procedure '%-.192s'"));
291
ADD_ERROR_MESSAGE(ER_WRONG_PARAMCOUNT_TO_PROCEDURE, N_("Incorrect parameter count to procedure '%-.192s'"));
292
ADD_ERROR_MESSAGE(ER_UNKNOWN_TABLE, N_("Unknown table '%-.192s' in %-.32s"));
293
ADD_ERROR_MESSAGE(ER_FIELD_SPECIFIED_TWICE, N_("Column '%-.192s' specified twice"));
294
ADD_ERROR_MESSAGE(ER_INVALID_GROUP_FUNC_USE, N_("Invalid use of group function"));
295
ADD_ERROR_MESSAGE(ER_UNSUPPORTED_EXTENSION, N_("Table '%-.192s' uses an extension that doesn't exist in this Drizzle version"));
296
ADD_ERROR_MESSAGE(ER_TABLE_MUST_HAVE_COLUMNS, N_("A table must have at least 1 column"));
297
ADD_ERROR_MESSAGE(ER_RECORD_FILE_FULL, N_("The table '%-.192s' is full"));
298
ADD_ERROR_MESSAGE(ER_TOO_MANY_TABLES, N_("Too many tables; Drizzle can only use %d tables in a join"));
299
ADD_ERROR_MESSAGE(ER_TOO_MANY_FIELDS, N_("Too many columns"));
300
ADD_ERROR_MESSAGE(ER_TOO_BIG_ROWSIZE, N_("Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"));
301
ADD_ERROR_MESSAGE(ER_WRONG_OUTER_JOIN, N_("Cross dependency found in OUTER JOIN; examine your ON conditions"));
302
ADD_ERROR_MESSAGE(ER_NULL_COLUMN_IN_INDEX, N_("Table handler doesn't support NULL in given index. Please change column '%-.192s' to be NOT NULL or use another handler"));
303
ADD_ERROR_MESSAGE(ER_PLUGIN_NO_PATHS, N_("No paths allowed for plugin library"));
304
ADD_ERROR_MESSAGE(ER_PLUGIN_EXISTS, N_("Plugin '%-.192s' already exists"));
305
ADD_ERROR_MESSAGE(ER_CANT_OPEN_LIBRARY, N_("Can't open shared library '%-.192s' (errno: %d %-.128s)"));
306
ADD_ERROR_MESSAGE(ER_CANT_FIND_DL_ENTRY, N_("Can't find symbol '%-.128s' in library '%-.128s'"));
307
ADD_ERROR_MESSAGE(ER_UPDATE_INFO, N_("Rows matched: %ld Changed: %ld Warnings: %ld"));
308
ADD_ERROR_MESSAGE(ER_CANT_CREATE_THREAD, N_("Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug"));
309
ADD_ERROR_MESSAGE(ER_WRONG_VALUE_COUNT_ON_ROW, N_("Column count doesn't match value count at row %ld"));
310
ADD_ERROR_MESSAGE(ER_CANT_REOPEN_TABLE, N_("Can't reopen table: '%-.192s'"));
311
ADD_ERROR_MESSAGE(ER_MIX_OF_GROUP_FUNC_AND_FIELDS, N_("Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause"));
312
ADD_ERROR_MESSAGE(ER_NO_SUCH_TABLE, N_("Table '%-.192s.%-.192s' doesn't exist"));
313
ADD_ERROR_MESSAGE(ER_SYNTAX_ERROR, N_("You have an error in your SQL syntax; check the manual that corresponds to your Drizzle server version for the right syntax to use"));
314
ADD_ERROR_MESSAGE(ER_NET_PACKET_TOO_LARGE, N_("Got a packet bigger than 'max_allowed_packet' bytes"));
315
ADD_ERROR_MESSAGE(ER_NET_PACKETS_OUT_OF_ORDER, N_("Got packets out of order"));
316
ADD_ERROR_MESSAGE(ER_TABLE_CANT_HANDLE_BLOB, N_("The used table type doesn't support BLOB/TEXT columns"));
317
ADD_ERROR_MESSAGE(ER_TABLE_CANT_HANDLE_AUTO_INCREMENT, N_("The used table type doesn't support AUTO_INCREMENT columns"));
318
ADD_ERROR_MESSAGE(ER_WRONG_COLUMN_NAME, N_("Incorrect column name '%-.100s'"));
319
ADD_ERROR_MESSAGE(ER_WRONG_KEY_COLUMN, N_("The used storage engine can't index column '%-.192s'"));
320
ADD_ERROR_MESSAGE(ER_WRONG_MRG_TABLE, N_("Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist"));
321
ADD_ERROR_MESSAGE(ER_DUP_UNIQUE, N_("Can't write, because of unique constraint, to table '%-.192s'"));
322
ADD_ERROR_MESSAGE(ER_BLOB_KEY_WITHOUT_LENGTH, N_("BLOB/TEXT column '%-.192s' used in key specification without a key length"));
323
ADD_ERROR_MESSAGE(ER_PRIMARY_CANT_HAVE_NULL, N_("All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead"));
324
ADD_ERROR_MESSAGE(ER_TOO_MANY_ROWS, N_("Result consisted of more than one row"));
325
ADD_ERROR_MESSAGE(ER_REQUIRES_PRIMARY_KEY, N_("This table type requires a primary key"));
326
ADD_ERROR_MESSAGE(ER_KEY_DOES_NOT_EXITS, N_("Key '%-.192s' doesn't exist in table '%-.192s'"));
327
ADD_ERROR_MESSAGE(ER_CHECK_NO_SUCH_TABLE, N_("Can't open table"));
328
ADD_ERROR_MESSAGE(ER_CHECK_NOT_IMPLEMENTED, N_("The storage engine for the table doesn't support %s"));
329
ADD_ERROR_MESSAGE(ER_ERROR_DURING_COMMIT, N_("Got error %d during COMMIT"));
330
ADD_ERROR_MESSAGE(ER_ERROR_DURING_ROLLBACK, N_("Got error %d during ROLLBACK"));
349
331
// This is a very incorrect place to use the PRIi64 macro as the
350
332
// program that looks over the source for the N_() macros does not
351
333
// (obviously) do macro expansion, so the string is entirely wrong for
352
334
// what it is trying to output for every language except english.
353
add(ER_NEW_ABORTING_CONNECTION, N_("Aborted connection %"PRIi64" to db: '%-.192s' user: '%-.48s' host: '%-.64s' (%-.64s)"));
354
add(ER_LOCK_OR_ACTIVE_TRANSACTION, N_("Can't execute the given command because you have active locked tables or an active transaction"));
355
add(ER_UNKNOWN_SYSTEM_VARIABLE, N_("Unknown system variable '%-.64s'"));
356
add(ER_CRASHED_ON_USAGE, N_("Table '%-.192s' is marked as crashed and should be repaired"));
357
add(ER_CRASHED_ON_REPAIR, N_("Table '%-.192s' is marked as crashed and last (automatic?) repair failed"));
358
add(ER_WARNING_NOT_COMPLETE_ROLLBACK, N_("Some non-transactional changed tables couldn't be rolled back"));
359
add(ER_SET_CONSTANTS_ONLY, N_("You may only use constant expressions with SET"));
360
add(ER_LOCK_WAIT_TIMEOUT, N_("Lock wait timeout exceeded; try restarting transaction"));
361
add(ER_LOCK_TABLE_FULL, N_("The total number of locks exceeds the lock table size"));
362
add(ER_READ_ONLY_TRANSACTION, N_("Update locks cannot be acquired during a READ UNCOMMITTED transaction"));
363
add(ER_DROP_DB_WITH_READ_LOCK, N_("DROP DATABASE not allowed while thread is holding global read lock"));
364
add(ER_WRONG_ARGUMENTS, N_("Incorrect arguments to %s"));
365
add(ER_LOCK_DEADLOCK, N_("Deadlock found when trying to get lock; try restarting transaction"));
366
add(ER_TABLE_CANT_HANDLE_FT, N_("The used table type doesn't support FULLTEXT indexes"));
367
add(ER_CANNOT_ADD_FOREIGN, N_("Cannot add foreign key constraint"));
368
add(ER_NO_REFERENCED_ROW, N_("Cannot add or update a child row: a foreign key constraint fails"));
369
add(ER_ROW_IS_REFERENCED, N_("Cannot delete or update a parent row: a foreign key constraint fails"));
370
add(ER_WRONG_USAGE, N_("Incorrect usage of %s and %s"));
371
add(ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT, N_("The used SELECT statements have a different number of columns"));
372
add(ER_CANT_UPDATE_WITH_READLOCK, N_("Can't execute the query because you have a conflicting read lock"));
373
add(ER_LOCAL_VARIABLE, N_("Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL"));
374
add(ER_GLOBAL_VARIABLE, N_("Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL"));
375
add(ER_NO_DEFAULT, N_("Variable '%-.64s' doesn't have a default value"));
376
add(ER_WRONG_VALUE_FOR_VAR, N_("Variable '%-.64s' can't be set to the value of '%-.200s'"));
377
add(ER_WRONG_TYPE_FOR_VAR, N_("Incorrect argument type to variable '%-.64s'"));
378
add(ER_VAR_CANT_BE_READ, N_("Variable '%-.64s' can only be set, not read"));
379
add(ER_CANT_USE_OPTION_HERE, N_("Incorrect usage/placement of '%s'"));
380
add(ER_NOT_SUPPORTED_YET, N_("This version of Drizzle doesn't yet support '%s'"));
381
add(ER_INCORRECT_GLOBAL_LOCAL_VAR, N_("Variable '%-.192s' is a %s variable"));
382
add(ER_WRONG_FK_DEF, N_("Incorrect foreign key definition for '%-.192s': %s"));
383
add(ER_KEY_REF_DO_NOT_MATCH_TABLE_REF, N_("Key reference and table reference don't match"));
384
add(ER_OPERAND_COLUMNS, N_("Operand should contain %d column(s)"));
385
add(ER_SUBQUERY_NO_1_ROW, N_("Subquery returns more than 1 row"));
386
add(ER_AUTO_CONVERT, N_("Converting column '%s' from %s to %s"));
387
add(ER_ILLEGAL_REFERENCE, N_("Reference '%-.64s' not supported (%s)"));
388
add(ER_DERIVED_MUST_HAVE_ALIAS, N_("Every derived table must have its own alias"));
389
add(ER_SELECT_REDUCED, N_("Select %u was reduced during optimization"));
390
add(ER_TABLENAME_NOT_ALLOWED_HERE, N_("Table '%-.192s' from one of the SELECTs cannot be used in %-.32s"));
391
add(ER_SPATIAL_CANT_HAVE_NULL, N_("All parts of a SPATIAL index must be NOT NULL"));
392
add(ER_COLLATION_CHARSET_MISMATCH, N_("COLLATION '%s' is not valid for CHARACTER SET '%s'"));
393
add(ER_TOO_BIG_FOR_UNCOMPRESS, N_("Uncompressed data size too large; the maximum size is %d (based on max_allowed_packet). The length of uncompressed data may also be corrupted."));
394
add(ER_ZLIB_Z_MEM_ERROR, N_("ZLIB: Not enough memory"));
395
add(ER_ZLIB_Z_BUF_ERROR, N_("ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)"));
396
add(ER_ZLIB_Z_DATA_ERROR, N_("ZLIB: Input data corrupted"));
397
add(ER_CUT_VALUE_GROUP_CONCAT, N_("%d line(s) were cut by GROUP_CONCAT()"));
398
add(ER_WARN_TOO_FEW_RECORDS, N_("Row %ld doesn't contain data for all columns"));
399
add(ER_WARN_TOO_MANY_RECORDS, N_("Row %ld was truncated; it contained more data than there were input columns"));
400
add(ER_WARN_NULL_TO_NOTNULL, N_("Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld"));
401
add(ER_WARN_DATA_OUT_OF_RANGE, N_("Out of range value for column '%s' at row %ld"));
402
add(ER_WARN_DATA_TRUNCATED, N_("Data truncated for column '%s' at row %ld"));
403
add(ER_CANT_AGGREGATE_2COLLATIONS, N_("Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'"));
404
add(ER_CANT_AGGREGATE_3COLLATIONS, N_("Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'"));
405
add(ER_CANT_AGGREGATE_NCOLLATIONS, N_("Illegal mix of collations for operation '%s'"));
406
add(ER_VARIABLE_IS_NOT_STRUCT, N_("Variable '%-.64s' is not a variable component (can't be used as XXXX.variable_name)"));
407
add(ER_UNKNOWN_COLLATION, N_("Unknown collation: '%-.64s'"));
408
add(ER_WARN_FIELD_RESOLVED, N_("Field or reference '%-.192s%s%-.192s%s%-.192s' of SELECT #%d was resolved in SELECT #%d"));
409
add(ER_WRONG_NAME_FOR_INDEX, N_("Incorrect index name '%-.100s'"));
410
add(ER_WRONG_NAME_FOR_CATALOG, N_("Incorrect catalog name '%-.100s'"));
411
add(ER_BAD_FT_COLUMN, N_("Column '%-.192s' cannot be part of FULLTEXT index"));
412
add(ER_UNKNOWN_STORAGE_ENGINE, N_("Unknown table engine '%s'"));
413
add(ER_NON_UPDATABLE_TABLE, N_("The target table %-.100s of the %s is not updatable"));
414
add(ER_FEATURE_DISABLED, N_("The '%s' feature is disabled; you need Drizzle built with '%s' to have it working"));
415
add(ER_OPTION_PREVENTS_STATEMENT, N_("The Drizzle server is running with the %s option so it cannot execute this statement"));
416
add(ER_DUPLICATED_VALUE_IN_TYPE, N_("Column '%-.100s' has duplicated value '%-.64s' in %s"));
417
add(ER_TRUNCATED_WRONG_VALUE, N_("Truncated incorrect %-.32s value: '%-.128s'"));
418
add(ER_TOO_MUCH_AUTO_TIMESTAMP_COLS, N_("Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause"));
419
add(ER_INVALID_ON_UPDATE, N_("Invalid ON UPDATE clause for '%-.192s' column"));
420
add(ER_GET_ERRMSG, N_("Got error %d '%-.100s' from %s"));
421
add(ER_GET_TEMPORARY_ERRMSG, N_("Got temporary error %d '%-.100s' from %s"));
422
add(ER_UNKNOWN_TIME_ZONE, N_("Unknown or incorrect time zone: '%-.64s'"));
423
add(ER_INVALID_CHARACTER_STRING, N_("Invalid %s character string: '%.64s'"));
424
add(ER_WARN_ALLOWED_PACKET_OVERFLOWED, N_("Result of %s() was larger than max_allowed_packet (%ld) - truncated"));
425
add(ER_SP_DOES_NOT_EXIST, N_("%s %s does not exist"));
426
add(ER_QUERY_INTERRUPTED, N_("Query execution was interrupted"));
427
add(ER_VIEW_INVALID, N_("View '%-.192s.%-.192s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them"));
428
add(ER_NO_DEFAULT_FOR_FIELD, N_("Field '%-.192s' doesn't have a default value"));
429
add(ER_DIVISION_BY_ZERO, N_("Division by 0"));
430
add(ER_TRUNCATED_WRONG_VALUE_FOR_FIELD, N_("Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %u"));
431
add(ER_ILLEGAL_VALUE_FOR_TYPE, N_("Illegal %s '%-.192s' value found during parsing"));
432
add(ER_KEY_PART_0, N_("Key part '%-.192s' length cannot be 0"));
433
add(ER_XAER_RMFAIL, N_("XAER_RMFAIL: The command cannot be executed when global transaction is in the %.64s state"));
434
add(ER_DATA_TOO_LONG, N_("Data too long for column '%s' at row %ld"));
435
add(ER_STARTUP, N_("%s: ready for connections.\nVersion: '%s' %s\n"));
436
add(ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR, N_("Can't load value from file with fixed size rows to variable"));
437
add(ER_WRONG_VALUE_FOR_TYPE, N_("Incorrect %-.32s value: '%-.128s' for function %-.32s"));
438
add(ER_TABLE_DEF_CHANGED, N_("Table definition has changed, please retry transaction"));
439
add(ER_SP_NO_RETSET, N_("Not allowed to return a result set from a %s"));
440
add(ER_CANT_CREATE_GEOMETRY_OBJECT, N_("Cannot get geometry object from data you send to the GEOMETRY field"));
441
add(ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG, N_("Explicit or implicit commit is not allowed in stored function or trigger."));
442
add(ER_TOO_BIG_SCALE, N_("Too big scale %d specified for column '%-.192s'. Maximum is %d."));
443
add(ER_TOO_BIG_PRECISION, N_("Too big precision %d specified for column '%-.192s'. Maximum is %d."));
444
add(ER_M_BIGGER_THAN_D, N_("For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%-.192s')."));
445
add(ER_TRG_IN_WRONG_SCHEMA, N_("Trigger in wrong schema"));
446
add(ER_STACK_OVERRUN_NEED_MORE, N_("Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'drizzled -O thread_stack=#' to specify a bigger stack."));
447
add(ER_TOO_BIG_DISPLAYWIDTH, N_("Display width out of range for column '%-.192s' (max = %d)"));
448
add(ER_DATETIME_FUNCTION_OVERFLOW, N_("Datetime function: %-.32s field overflow"));
449
add(ER_ROW_IS_REFERENCED_2, N_("Cannot delete or update a parent row: a foreign key constraint fails (%.192s)"));
450
add(ER_NO_REFERENCED_ROW_2, N_("Cannot add or update a child row: a foreign key constraint fails (%.192s)"));
451
add(ER_SP_FETCH_NO_DATA, N_("No data - zero rows fetched, selected, or processed"));
452
add(ER_TABLE_NEEDS_UPGRADE, N_("Table upgrade required. Please do \"REPAIR TABLE `%-.32s`\" to fix it!"));
453
add(ER_NON_GROUPING_FIELD_USED, N_("non-grouping field '%-.192s' is used in %-.64s clause"));
454
add(ER_TABLE_CANT_HANDLE_SPKEYS, N_("The used table type doesn't support SPATIAL indexes"));
455
add(ER_REMOVED_SPACES, N_("Leading spaces are removed from name '%s'"));
456
add(ER_AUTOINC_READ_FAILED, N_("Failed to read auto-increment value from storage engine"));
457
add(ER_WRONG_STRING_LENGTH, N_("String '%-.70s' is too long for %s (should be no longer than %d)"));
458
add(ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT, N_("Too high level of nesting for select"));
459
add(ER_NAME_BECOMES_EMPTY, N_("Name '%-.64s' has become ''"));
460
add(ER_AMBIGUOUS_FIELD_TERM, N_("First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY"));
461
add(ER_ILLEGAL_HA_CREATE_OPTION, N_("Table storage engine '%-.64s' does not support the create option '%.64s'"));
462
add(ER_INVALID_OPTION_VALUE, N_("Error setting %-.32s. Given value %-.128s %-.128s"));
463
add(ER_WRONG_VALUE, N_("Incorrect %-.32s value: '%-.128s'"));
464
add(ER_NO_PARTITION_FOR_GIVEN_VALUE, N_("Table has no partition for value %-.64s"));
465
add(ER_BINLOG_ROW_LOGGING_FAILED, N_("Writing one row to the row-based binary log failed"));
466
add(ER_DROP_INDEX_FK, N_("Cannot drop index '%-.192s': needed in a foreign key constraint"));
467
add(ER_FOREIGN_DUPLICATE_KEY, N_("Upholding foreign key constraints for table '%.192s', entry '%-.192s', key %d would lead to a duplicate entry"));
468
add(ER_CANT_CHANGE_TX_ISOLATION, N_("Transaction isolation level can't be changed while a transaction is in progress"));
469
add(ER_WRONG_PARAMCOUNT_TO_FUNCTION, N_("Incorrect parameter count in the call to native function '%-.192s'"));
470
add(ER_WRONG_PARAMETERS_TO_NATIVE_FCT, N_("Incorrect parameters in the call to native function '%-.192s'"));
471
add(ER_DUP_ENTRY_WITH_KEY_NAME, N_("Duplicate entry '%-.64s' for key '%-.192s'"));
472
add(ER_LOAD_DATA_INVALID_COLUMN, N_("Invalid column reference (%-.64s) in LOAD DATA"));
473
add(ER_INVALID_UNIX_TIMESTAMP_VALUE, N_("Received an invalid value '%s' for a UNIX timestamp."));
474
add(ER_INVALID_DATETIME_VALUE, N_("Received an invalid datetime value '%s'."));
475
add(ER_INVALID_NULL_ARGUMENT, N_("Received a NULL argument for function '%s'."));
476
add(ER_ARGUMENT_OUT_OF_RANGE, N_("Received an out-of-range argument '%s' for function '%s'."));
477
add(ER_INVALID_ENUM_VALUE, N_("Received an invalid enum value '%s'."));
478
add(ER_NO_PRIMARY_KEY_ON_REPLICATED_TABLE, N_("Tables which are replicated require a primary key."));
479
add(ER_CORRUPT_TABLE_DEFINITION, N_("Corrupt or invalid table definition: %s"));
480
add(ER_CORRUPT_SCHEMA_DEFINITION, N_("Corrupt or invalid schema definition for %s : %s"));
481
add(ER_SCHEMA_DOES_NOT_EXIST, N_("Schema does not exist: %s"));
482
add(ER_ALTER_SCHEMA, N_("Error altering schema: %s"));
483
add(ER_DROP_SCHEMA, +N_("Error droppping Schema : %s"));
484
add(ER_USE_SQL_BIG_RESULT, N_("Temporary table too large, rerun with SQL_BIG_RESULT."));
485
add(ER_UNKNOWN_ENGINE_OPTION, N_("Unknown table engine option key/pair %s = %s."));
486
add(ER_UNKNOWN_SCHEMA_OPTION, N_("Unknown schema engine option key/pair %s = %s."));
335
ADD_ERROR_MESSAGE(ER_NEW_ABORTING_CONNECTION, N_("Aborted connection %"PRIi64" to db: '%-.192s' user: '%-.48s' host: '%-.64s' (%-.64s)"));
336
ADD_ERROR_MESSAGE(ER_LOCK_OR_ACTIVE_TRANSACTION, N_("Can't execute the given command because you have active locked tables or an active transaction"));
337
ADD_ERROR_MESSAGE(ER_UNKNOWN_SYSTEM_VARIABLE, N_("Unknown system variable '%-.64s'"));
338
ADD_ERROR_MESSAGE(ER_CRASHED_ON_USAGE, N_("Table '%-.192s' is marked as crashed and should be repaired"));
339
ADD_ERROR_MESSAGE(ER_CRASHED_ON_REPAIR, N_("Table '%-.192s' is marked as crashed and last (automatic?) repair failed"));
340
ADD_ERROR_MESSAGE(ER_WARNING_NOT_COMPLETE_ROLLBACK, N_("Some non-transactional changed tables couldn't be rolled back"));
341
ADD_ERROR_MESSAGE(ER_SET_CONSTANTS_ONLY, N_("You may only use constant expressions with SET"));
342
ADD_ERROR_MESSAGE(ER_LOCK_WAIT_TIMEOUT, N_("Lock wait timeout exceeded; try restarting transaction"));
343
ADD_ERROR_MESSAGE(ER_LOCK_TABLE_FULL, N_("The total number of locks exceeds the lock table size"));
344
ADD_ERROR_MESSAGE(ER_READ_ONLY_TRANSACTION, N_("Update locks cannot be acquired during a READ UNCOMMITTED transaction"));
345
ADD_ERROR_MESSAGE(ER_DROP_DB_WITH_READ_LOCK, N_("DROP DATABASE not allowed while thread is holding global read lock"));
346
ADD_ERROR_MESSAGE(ER_WRONG_ARGUMENTS, N_("Incorrect arguments to %s"));
347
ADD_ERROR_MESSAGE(ER_LOCK_DEADLOCK, N_("Deadlock found when trying to get lock; try restarting transaction"));
348
ADD_ERROR_MESSAGE(ER_TABLE_CANT_HANDLE_FT, N_("The used table type doesn't support FULLTEXT indexes"));
349
ADD_ERROR_MESSAGE(ER_CANNOT_ADD_FOREIGN, N_("Cannot add foreign key constraint"));
350
ADD_ERROR_MESSAGE(ER_NO_REFERENCED_ROW, N_("Cannot add or update a child row: a foreign key constraint fails"));
351
ADD_ERROR_MESSAGE(ER_ROW_IS_REFERENCED, N_("Cannot delete or update a parent row: a foreign key constraint fails"));
352
ADD_ERROR_MESSAGE(ER_WRONG_USAGE, N_("Incorrect usage of %s and %s"));
353
ADD_ERROR_MESSAGE(ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT, N_("The used SELECT statements have a different number of columns"));
354
ADD_ERROR_MESSAGE(ER_CANT_UPDATE_WITH_READLOCK, N_("Can't execute the query because you have a conflicting read lock"));
355
ADD_ERROR_MESSAGE(ER_LOCAL_VARIABLE, N_("Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL"));
356
ADD_ERROR_MESSAGE(ER_GLOBAL_VARIABLE, N_("Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL"));
357
ADD_ERROR_MESSAGE(ER_NO_DEFAULT, N_("Variable '%-.64s' doesn't have a default value"));
358
ADD_ERROR_MESSAGE(ER_WRONG_VALUE_FOR_VAR, N_("Variable '%-.64s' can't be set to the value of '%-.200s'"));
359
ADD_ERROR_MESSAGE(ER_WRONG_TYPE_FOR_VAR, N_("Incorrect argument type to variable '%-.64s'"));
360
ADD_ERROR_MESSAGE(ER_VAR_CANT_BE_READ, N_("Variable '%-.64s' can only be set, not read"));
361
ADD_ERROR_MESSAGE(ER_CANT_USE_OPTION_HERE, N_("Incorrect usage/placement of '%s'"));
362
ADD_ERROR_MESSAGE(ER_NOT_SUPPORTED_YET, N_("This version of Drizzle doesn't yet support '%s'"));
363
ADD_ERROR_MESSAGE(ER_INCORRECT_GLOBAL_LOCAL_VAR, N_("Variable '%-.192s' is a %s variable"));
364
ADD_ERROR_MESSAGE(ER_WRONG_FK_DEF, N_("Incorrect foreign key definition for '%-.192s': %s"));
365
ADD_ERROR_MESSAGE(ER_KEY_REF_DO_NOT_MATCH_TABLE_REF, N_("Key reference and table reference don't match"));
366
ADD_ERROR_MESSAGE(ER_OPERAND_COLUMNS, N_("Operand should contain %d column(s)"));
367
ADD_ERROR_MESSAGE(ER_SUBQUERY_NO_1_ROW, N_("Subquery returns more than 1 row"));
368
ADD_ERROR_MESSAGE(ER_AUTO_CONVERT, N_("Converting column '%s' from %s to %s"));
369
ADD_ERROR_MESSAGE(ER_ILLEGAL_REFERENCE, N_("Reference '%-.64s' not supported (%s)"));
370
ADD_ERROR_MESSAGE(ER_DERIVED_MUST_HAVE_ALIAS, N_("Every derived table must have its own alias"));
371
ADD_ERROR_MESSAGE(ER_SELECT_REDUCED, N_("Select %u was reduced during optimization"));
372
ADD_ERROR_MESSAGE(ER_TABLENAME_NOT_ALLOWED_HERE, N_("Table '%-.192s' from one of the SELECTs cannot be used in %-.32s"));
373
ADD_ERROR_MESSAGE(ER_SPATIAL_CANT_HAVE_NULL, N_("All parts of a SPATIAL index must be NOT NULL"));
374
ADD_ERROR_MESSAGE(ER_COLLATION_CHARSET_MISMATCH, N_("COLLATION '%s' is not valid for CHARACTER SET '%s'"));
375
ADD_ERROR_MESSAGE(ER_TOO_BIG_FOR_UNCOMPRESS, N_("Uncompressed data size too large; the maximum size is %d (based on max_allowed_packet). The length of uncompressed data may also be corrupted."));
376
ADD_ERROR_MESSAGE(ER_ZLIB_Z_MEM_ERROR, N_("ZLIB: Not enough memory"));
377
ADD_ERROR_MESSAGE(ER_ZLIB_Z_BUF_ERROR, N_("ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)"));
378
ADD_ERROR_MESSAGE(ER_ZLIB_Z_DATA_ERROR, N_("ZLIB: Input data corrupted"));
379
ADD_ERROR_MESSAGE(ER_CUT_VALUE_GROUP_CONCAT, N_("%d line(s) were cut by GROUP_CONCAT()"));
380
ADD_ERROR_MESSAGE(ER_WARN_TOO_FEW_RECORDS, N_("Row %ld doesn't contain data for all columns"));
381
ADD_ERROR_MESSAGE(ER_WARN_TOO_MANY_RECORDS, N_("Row %ld was truncated; it contained more data than there were input columns"));
382
ADD_ERROR_MESSAGE(ER_WARN_NULL_TO_NOTNULL, N_("Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld"));
383
ADD_ERROR_MESSAGE(ER_WARN_DATA_OUT_OF_RANGE, N_("Out of range value for column '%s' at row %ld"));
384
ADD_ERROR_MESSAGE(ER_WARN_DATA_TRUNCATED, N_("Data truncated for column '%s' at row %ld"));
385
ADD_ERROR_MESSAGE(ER_CANT_AGGREGATE_2COLLATIONS, N_("Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'"));
386
ADD_ERROR_MESSAGE(ER_CANT_AGGREGATE_3COLLATIONS, N_("Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'"));
387
ADD_ERROR_MESSAGE(ER_CANT_AGGREGATE_NCOLLATIONS, N_("Illegal mix of collations for operation '%s'"));
388
ADD_ERROR_MESSAGE(ER_VARIABLE_IS_NOT_STRUCT, N_("Variable '%-.64s' is not a variable component (can't be used as XXXX.variable_name)"));
389
ADD_ERROR_MESSAGE(ER_UNKNOWN_COLLATION, N_("Unknown collation: '%-.64s'"));
390
ADD_ERROR_MESSAGE(ER_WARN_FIELD_RESOLVED, N_("Field or reference '%-.192s%s%-.192s%s%-.192s' of SELECT #%d was resolved in SELECT #%d"));
391
ADD_ERROR_MESSAGE(ER_WRONG_NAME_FOR_INDEX, N_("Incorrect index name '%-.100s'"));
392
ADD_ERROR_MESSAGE(ER_WRONG_NAME_FOR_CATALOG, N_("Incorrect catalog name '%-.100s'"));
393
ADD_ERROR_MESSAGE(ER_BAD_FT_COLUMN, N_("Column '%-.192s' cannot be part of FULLTEXT index"));
394
ADD_ERROR_MESSAGE(ER_UNKNOWN_STORAGE_ENGINE, N_("Unknown table engine '%s'"));
395
ADD_ERROR_MESSAGE(ER_NON_UPDATABLE_TABLE, N_("The target table %-.100s of the %s is not updatable"));
396
ADD_ERROR_MESSAGE(ER_FEATURE_DISABLED, N_("The '%s' feature is disabled; you need Drizzle built with '%s' to have it working"));
397
ADD_ERROR_MESSAGE(ER_OPTION_PREVENTS_STATEMENT, N_("The Drizzle server is running with the %s option so it cannot execute this statement"));
398
ADD_ERROR_MESSAGE(ER_DUPLICATED_VALUE_IN_TYPE, N_("Column '%-.100s' has duplicated value '%-.64s' in %s"));
399
ADD_ERROR_MESSAGE(ER_TRUNCATED_WRONG_VALUE, N_("Truncated incorrect %-.32s value: '%-.128s'"));
400
ADD_ERROR_MESSAGE(ER_TOO_MUCH_AUTO_TIMESTAMP_COLS, N_("Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause"));
401
ADD_ERROR_MESSAGE(ER_INVALID_ON_UPDATE, N_("Invalid ON UPDATE clause for '%-.192s' column"));
402
ADD_ERROR_MESSAGE(ER_GET_ERRMSG, N_("Got error %d '%-.100s' from %s"));
403
ADD_ERROR_MESSAGE(ER_GET_TEMPORARY_ERRMSG, N_("Got temporary error %d '%-.100s' from %s"));
404
ADD_ERROR_MESSAGE(ER_UNKNOWN_TIME_ZONE, N_("Unknown or incorrect time zone: '%-.64s'"));
405
ADD_ERROR_MESSAGE(ER_INVALID_CHARACTER_STRING, N_("Invalid %s character string: '%.64s'"));
406
ADD_ERROR_MESSAGE(ER_WARN_ALLOWED_PACKET_OVERFLOWED, N_("Result of %s() was larger than max_allowed_packet (%ld) - truncated"));
407
ADD_ERROR_MESSAGE(ER_SP_DOES_NOT_EXIST, N_("%s %s does not exist"));
408
ADD_ERROR_MESSAGE(ER_QUERY_INTERRUPTED, N_("Query execution was interrupted"));
409
ADD_ERROR_MESSAGE(ER_VIEW_INVALID, N_("View '%-.192s.%-.192s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them"));
410
ADD_ERROR_MESSAGE(ER_NO_DEFAULT_FOR_FIELD, N_("Field '%-.192s' doesn't have a default value"));
411
ADD_ERROR_MESSAGE(ER_DIVISION_BY_ZERO, N_("Division by 0"));
412
ADD_ERROR_MESSAGE(ER_TRUNCATED_WRONG_VALUE_FOR_FIELD, N_("Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %u"));
413
ADD_ERROR_MESSAGE(ER_ILLEGAL_VALUE_FOR_TYPE, N_("Illegal %s '%-.192s' value found during parsing"));
414
ADD_ERROR_MESSAGE(ER_KEY_PART_0, N_("Key part '%-.192s' length cannot be 0"));
415
ADD_ERROR_MESSAGE(ER_XAER_RMFAIL, N_("XAER_RMFAIL: The command cannot be executed when global transaction is in the %.64s state"));
416
ADD_ERROR_MESSAGE(ER_DATA_TOO_LONG, N_("Data too long for column '%s' at row %ld"));
417
ADD_ERROR_MESSAGE(ER_STARTUP, N_("%s: ready for connections.\nVersion: '%s' %s\n"));
418
ADD_ERROR_MESSAGE(ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR, N_("Can't load value from file with fixed size rows to variable"));
419
ADD_ERROR_MESSAGE(ER_WRONG_VALUE_FOR_TYPE, N_("Incorrect %-.32s value: '%-.128s' for function %-.32s"));
420
ADD_ERROR_MESSAGE(ER_TABLE_DEF_CHANGED, N_("Table definition has changed, please retry transaction"));
421
ADD_ERROR_MESSAGE(ER_SP_NO_RETSET, N_("Not allowed to return a result set from a %s"));
422
ADD_ERROR_MESSAGE(ER_CANT_CREATE_GEOMETRY_OBJECT, N_("Cannot get geometry object from data you send to the GEOMETRY field"));
423
ADD_ERROR_MESSAGE(ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG, N_("Explicit or implicit commit is not allowed in stored function or trigger."));
424
ADD_ERROR_MESSAGE(ER_TOO_BIG_SCALE, N_("Too big scale %d specified for column '%-.192s'. Maximum is %d."));
425
ADD_ERROR_MESSAGE(ER_TOO_BIG_PRECISION, N_("Too big precision %d specified for column '%-.192s'. Maximum is %d."));
426
ADD_ERROR_MESSAGE(ER_M_BIGGER_THAN_D, N_("For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%-.192s')."));
427
ADD_ERROR_MESSAGE(ER_TRG_IN_WRONG_SCHEMA, N_("Trigger in wrong schema"));
428
ADD_ERROR_MESSAGE(ER_STACK_OVERRUN_NEED_MORE, N_("Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'drizzled -O thread_stack=#' to specify a bigger stack."));
429
ADD_ERROR_MESSAGE(ER_TOO_BIG_DISPLAYWIDTH, N_("Display width out of range for column '%-.192s' (max = %d)"));
430
ADD_ERROR_MESSAGE(ER_DATETIME_FUNCTION_OVERFLOW, N_("Datetime function: %-.32s field overflow"));
431
ADD_ERROR_MESSAGE(ER_ROW_IS_REFERENCED_2, N_("Cannot delete or update a parent row: a foreign key constraint fails (%.192s)"));
432
ADD_ERROR_MESSAGE(ER_NO_REFERENCED_ROW_2, N_("Cannot add or update a child row: a foreign key constraint fails (%.192s)"));
433
ADD_ERROR_MESSAGE(ER_SP_FETCH_NO_DATA, N_("No data - zero rows fetched, selected, or processed"));
434
ADD_ERROR_MESSAGE(ER_TABLE_NEEDS_UPGRADE, N_("Table upgrade required. Please do \"REPAIR TABLE `%-.32s`\" to fix it!"));
435
ADD_ERROR_MESSAGE(ER_NON_GROUPING_FIELD_USED, N_("non-grouping field '%-.192s' is used in %-.64s clause"));
436
ADD_ERROR_MESSAGE(ER_TABLE_CANT_HANDLE_SPKEYS, N_("The used table type doesn't support SPATIAL indexes"));
437
ADD_ERROR_MESSAGE(ER_REMOVED_SPACES, N_("Leading spaces are removed from name '%s'"));
438
ADD_ERROR_MESSAGE(ER_AUTOINC_READ_FAILED, N_("Failed to read auto-increment value from storage engine"));
439
ADD_ERROR_MESSAGE(ER_WRONG_STRING_LENGTH, N_("String '%-.70s' is too long for %s (should be no longer than %d)"));
440
ADD_ERROR_MESSAGE(ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT, N_("Too high level of nesting for select"));
441
ADD_ERROR_MESSAGE(ER_NAME_BECOMES_EMPTY, N_("Name '%-.64s' has become ''"));
442
ADD_ERROR_MESSAGE(ER_AMBIGUOUS_FIELD_TERM, N_("First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY"));
443
ADD_ERROR_MESSAGE(ER_ILLEGAL_HA_CREATE_OPTION, N_("Table storage engine '%-.64s' does not support the create option '%.64s'"));
444
ADD_ERROR_MESSAGE(ER_INVALID_OPTION_VALUE, N_("Error setting %-.32s. Given value %-.128s %-.128s"));
445
ADD_ERROR_MESSAGE(ER_WRONG_VALUE, N_("Incorrect %-.32s value: '%-.128s'"));
446
ADD_ERROR_MESSAGE(ER_NO_PARTITION_FOR_GIVEN_VALUE, N_("Table has no partition for value %-.64s"));
447
ADD_ERROR_MESSAGE(ER_BINLOG_ROW_LOGGING_FAILED, N_("Writing one row to the row-based binary log failed"));
448
ADD_ERROR_MESSAGE(ER_DROP_INDEX_FK, N_("Cannot drop index '%-.192s': needed in a foreign key constraint"));
449
ADD_ERROR_MESSAGE(ER_FOREIGN_DUPLICATE_KEY, N_("Upholding foreign key constraints for table '%.192s', entry '%-.192s', key %d would lead to a duplicate entry"));
450
ADD_ERROR_MESSAGE(ER_CANT_CHANGE_TX_ISOLATION, N_("Transaction isolation level can't be changed while a transaction is in progress"));
451
ADD_ERROR_MESSAGE(ER_WRONG_PARAMCOUNT_TO_FUNCTION, N_("Incorrect parameter count in the call to native function '%-.192s'"));
452
ADD_ERROR_MESSAGE(ER_WRONG_PARAMETERS_TO_NATIVE_FCT, N_("Incorrect parameters in the call to native function '%-.192s'"));
453
ADD_ERROR_MESSAGE(ER_DUP_ENTRY_WITH_KEY_NAME, N_("Duplicate entry '%-.64s' for key '%-.192s'"));
454
ADD_ERROR_MESSAGE(ER_LOAD_DATA_INVALID_COLUMN, N_("Invalid column reference (%-.64s) in LOAD DATA"));
455
ADD_ERROR_MESSAGE(ER_INVALID_UNIX_TIMESTAMP_VALUE, N_("Received an invalid value '%s' for a UNIX timestamp."));
456
ADD_ERROR_MESSAGE(ER_INVALID_DATETIME_VALUE, N_("Received an invalid datetime value '%s'."));
457
ADD_ERROR_MESSAGE(ER_INVALID_NULL_ARGUMENT, N_("Received a NULL argument for function '%s'."));
458
ADD_ERROR_MESSAGE(ER_ARGUMENT_OUT_OF_RANGE, N_("Received an out-of-range argument '%s' for function '%s'."));
459
ADD_ERROR_MESSAGE(ER_INVALID_ENUM_VALUE, N_("Received an invalid enum value '%s'."));
460
ADD_ERROR_MESSAGE(ER_NO_PRIMARY_KEY_ON_REPLICATED_TABLE, N_("Tables which are replicated require a primary key."));
461
ADD_ERROR_MESSAGE(ER_CORRUPT_TABLE_DEFINITION, N_("Corrupt or invalid table definition: %s"));
462
ADD_ERROR_MESSAGE(ER_CORRUPT_SCHEMA_DEFINITION, N_("Corrupt or invalid schema definition for %s : %s"));
463
ADD_ERROR_MESSAGE(ER_SCHEMA_DOES_NOT_EXIST, N_("Schema does not exist: %s"));
464
ADD_ERROR_MESSAGE(ER_ALTER_SCHEMA, N_("Error altering schema: %s"));
465
ADD_ERROR_MESSAGE(ER_DROP_SCHEMA, +N_("Error droppping Schema : %s"));
466
ADD_ERROR_MESSAGE(ER_USE_SQL_BIG_RESULT, N_("Temporary table too large, rerun with SQL_BIG_RESULT."));
467
ADD_ERROR_MESSAGE(ER_UNKNOWN_ENGINE_OPTION, N_("Unknown table engine option key/pair %s = %s."));
468
ADD_ERROR_MESSAGE(ER_UNKNOWN_SCHEMA_OPTION, N_("Unknown schema engine option key/pair %s = %s."));
470
ADD_ERROR_MESSAGE(ER_ADMIN_ACCESS, N_("Admin access not allowed from this username/IP address."));
488
472
// User lock/barrier error messages
489
add(ER_USER_LOCKS_CANT_WAIT_ON_OWN_BARRIER, N_("wait() can not be called on session owning user defined barrier."));
490
add(ER_USER_LOCKS_UNKNOWN_BARRIER, N_("Unknown user defined barrier requested."));
491
add(ER_USER_LOCKS_NOT_OWNER_OF_BARRIER, N_("Session does not own user defined barrier."));
492
add(ER_USER_LOCKS_CANT_WAIT_ON_OWN_LOCK, N_("Session can not wait on a user defined lock owned by the session."));
493
add(ER_USER_LOCKS_NOT_OWNER_OF_LOCK, N_("Session does not own user defined lock."));
495
add(ER_USER_LOCKS_INVALID_NAME_BARRIER, N_("Invalid name for user defined barrier."));
496
add(ER_USER_LOCKS_INVALID_NAME_LOCK, N_("Invalid name for user defined lock."));
498
add(ER_INVALID_ALTER_TABLE_FOR_NOT_NULL, N_("Either a DEFAULt value or NULL NULL description is required for a new column if table is not empty"));
501
add(EE_CANTUNLOCK, N_("Can't unlock file (Errcode: %d)"));
502
add(EE_CANT_CHSIZE, N_("Can't change size of file (Errcode: %d)"));
503
add(EE_CANT_OPEN_STREAM, N_("Can't open stream from handle (Errcode: %d)"));
504
add(EE_LINK_WARNING, N_("Warning: '%s' had %d links"));
505
add(EE_OPEN_WARNING, N_("Warning: %d files and %d streams is left open\n"));
506
add(EE_CANT_MKDIR, N_("Can't create directory '%s' (Errcode: %d)"));
507
add(EE_UNKNOWN_CHARSET, N_("Character set '%s' is not a compiled character set and is not specified in the %s file"));
508
add(EE_OUT_OF_FILERESOURCES, N_("Out of resources when opening file '%s' (Errcode: %d)"));
509
add(EE_CANT_READLINK, N_("Can't read value for symlink '%s' (Error %d)"));
510
add(EE_CANT_SYMLINK, N_("Can't create symlink '%s' pointing at '%s' (Error %d)"));
511
add(EE_REALPATH, N_("Error on realpath() on '%s' (Error %d)"));
512
add(EE_SYNC, N_("Can't sync file '%s' to disk (Errcode: %d)"));
513
add(EE_UNKNOWN_COLLATION, N_("Collation '%s' is not a compiled collation and is not specified in the %s file"));
514
add(EE_FILE_NOT_CLOSED, N_("File '%s' (fileno: %d) was not closed"));
473
ADD_ERROR_MESSAGE(ER_USER_LOCKS_CANT_WAIT_ON_OWN_BARRIER, N_("wait() can not be called on session owning user defined barrier."));
474
ADD_ERROR_MESSAGE(ER_USER_LOCKS_UNKNOWN_BARRIER, N_("Unknown user defined barrier requested."));
475
ADD_ERROR_MESSAGE(ER_USER_LOCKS_NOT_OWNER_OF_BARRIER, N_("Session does not own user defined barrier."));
476
ADD_ERROR_MESSAGE(ER_USER_LOCKS_CANT_WAIT_ON_OWN_LOCK, N_("Session can not wait on a user defined lock owned by the session."));
477
ADD_ERROR_MESSAGE(ER_USER_LOCKS_NOT_OWNER_OF_LOCK, N_("Session does not own user defined lock."));
479
ADD_ERROR_MESSAGE(ER_USER_LOCKS_INVALID_NAME_BARRIER, N_("Invalid name for user defined barrier."));
480
ADD_ERROR_MESSAGE(ER_USER_LOCKS_INVALID_NAME_LOCK, N_("Invalid name for user defined lock."));
482
ADD_ERROR_MESSAGE(ER_INVALID_ALTER_TABLE_FOR_NOT_NULL, N_("Either a DEFAULt value or NULL NULL description is required for a new column if table is not empty"));
485
ADD_ERROR_MESSAGE(EE_CANTUNLOCK, N_("Can't unlock file (Errcode: %d)"));
486
ADD_ERROR_MESSAGE(EE_CANT_CHSIZE, N_("Can't change size of file (Errcode: %d)"));
487
ADD_ERROR_MESSAGE(EE_CANT_OPEN_STREAM, N_("Can't open stream from handle (Errcode: %d)"));
488
ADD_ERROR_MESSAGE(EE_LINK_WARNING, N_("Warning: '%s' had %d links"));
489
ADD_ERROR_MESSAGE(EE_OPEN_WARNING, N_("Warning: %d files and %d streams is left open\n"));
490
ADD_ERROR_MESSAGE(EE_CANT_MKDIR, N_("Can't create directory '%s' (Errcode: %d)"));
491
ADD_ERROR_MESSAGE(EE_UNKNOWN_CHARSET, N_("Character set '%s' is not a compiled character set and is not specified in the %s file"));
492
ADD_ERROR_MESSAGE(EE_OUT_OF_FILERESOURCES, N_("Out of resources when opening file '%s' (Errcode: %d)"));
493
ADD_ERROR_MESSAGE(EE_CANT_READLINK, N_("Can't read value for symlink '%s' (Error %d)"));
494
ADD_ERROR_MESSAGE(EE_CANT_SYMLINK, N_("Can't create symlink '%s' pointing at '%s' (Error %d)"));
495
ADD_ERROR_MESSAGE(EE_REALPATH, N_("Error on realpath() on '%s' (Error %d)"));
496
ADD_ERROR_MESSAGE(EE_SYNC, N_("Can't sync file '%s' to disk (Errcode: %d)"));
497
ADD_ERROR_MESSAGE(EE_UNKNOWN_COLLATION, N_("Collation '%s' is not a compiled collation and is not specified in the %s file"));
498
ADD_ERROR_MESSAGE(EE_FILE_NOT_CLOSED, N_("File '%s' (fileno: %d) was not closed"));
501
ADD_ERROR_MESSAGE(ER_INVALID_UUID_VALUE, N_("Received an invalid UUID value"));
502
ADD_ERROR_MESSAGE(ER_INVALID_UUID_TIME, N_("The UUID was not created with a valid time"));
516
504
// Some old error values use the same strings as some new error values.
517
add(EE_FILENOTFOUND, find(ER_FILE_NOT_FOUND));
518
add(EE_CANTCREATEFILE, find(ER_CANT_CREATE_FILE));
519
add(EE_READ, find(ER_ERROR_ON_READ));
520
add(EE_WRITE, find(ER_ERROR_ON_WRITE));
521
add(EE_BADCLOSE, find(ER_ERROR_ON_CLOSE));
522
add(EE_OUTOFMEMORY, find(ER_OUTOFMEMORY));
523
add(EE_DELETE, find(ER_CANT_DELETE_FILE));
524
add(EE_LINK, find(ER_ERROR_ON_RENAME));
525
add(EE_EOFERR, find(ER_UNEXPECTED_EOF));
526
add(EE_CANTLOCK, find(ER_CANT_LOCK));
527
add(EE_DIR, find(ER_CANT_READ_DIR));
528
add(EE_STAT, find(ER_CANT_GET_STAT));
529
add(EE_DISK_FULL, find(ER_DISK_FULL));
505
ADD_ERROR_MESSAGE(EE_FILENOTFOUND, find(ER_FILE_NOT_FOUND));
506
ADD_ERROR_MESSAGE(EE_CANTCREATEFILE, find(ER_CANT_CREATE_FILE));
507
ADD_ERROR_MESSAGE(EE_READ, find(ER_ERROR_ON_READ));
508
ADD_ERROR_MESSAGE(EE_WRITE, find(ER_ERROR_ON_WRITE));
509
ADD_ERROR_MESSAGE(EE_BADCLOSE, find(ER_ERROR_ON_CLOSE));
510
ADD_ERROR_MESSAGE(EE_OUTOFMEMORY, find(ER_OUTOFMEMORY));
511
ADD_ERROR_MESSAGE(EE_DELETE, find(ER_CANT_DELETE_FILE));
512
ADD_ERROR_MESSAGE(EE_LINK, find(ER_ERROR_ON_RENAME));
513
ADD_ERROR_MESSAGE(EE_EOFERR, find(ER_UNEXPECTED_EOF));
514
ADD_ERROR_MESSAGE(EE_CANTLOCK, find(ER_CANT_LOCK));
515
ADD_ERROR_MESSAGE(EE_DIR, find(ER_CANT_READ_DIR));
516
ADD_ERROR_MESSAGE(EE_STAT, find(ER_CANT_GET_STAT));
517
ADD_ERROR_MESSAGE(EE_DISK_FULL, find(ER_DISK_FULL));
added
removed
drizzled/error.cc
