4
[ Version 1.6 for Bazaar 1.6 ]
6
Loggerhead is a web viewer for Bazaar branches. It can be used to
7
navigate a branch history, annotate files, perform searches... all the
13
Loggerhead depends on SimpleTAL for templating and Paste for the
14
server. So you need these installed -- on Ubuntu you want the
15
'python-simpletal' and 'python-paste' packages installed. You need
16
version 1.2 or newer of Paste.
18
Then simply run the 'serve-branches.py' script of loggerhead from the
19
directory containing the branches you want to serve.
28
Previous versions of Loggerhead read their configuration from a config
29
file. This mode of operation is still supported by the
30
'start-loggerhead.py' script. A 'loggerhead.conf.example' file is
31
included in the source which has comments explaining the various
34
Loggerhead can then be started by running::
36
$ ./start-loggerhead.py
38
This will run loggerhead in the background. It listens on port 8080
39
by default, so go to http://localhost:8080/ in your browser to see the
40
list of bublished branches.
42
To stop Loggerhead, run::
44
$ ./stop-loggerhead.py
46
In the configuration file you can configure projects, and branches per
47
project. The idea is that you could be publishing several (possibly
48
unrelated) projects through the same loggerhead instance, and several
49
branches for the same project. See the "loggerhead.conf.example" file
50
included with the source.
52
A debug and access log are stored in the logs/ folder, relative to
53
the location of the start-loggerhead.py script.
55
You may update the Bazaar branch at any time (for example, from a cron).
56
Loggerhead will notice and refresh, and Bazaar uses its own branch
57
locking to prevent corruption.
59
SERVING LOGGERHEAD FROM BEHIND APACHE
60
-------------------------------------
62
If you want to view Bazaar branches from your existing Apache
63
installation, you'll need to configure Apache to proxy certain
64
requests to Loggerhead. Adding lines like this to you Apache
65
configuration is one way to do this::
4
[ version 1.0 for bazaar 0.13 ]
6
Loggerhead is a web viewer for bazaar branches. It can be used to navigate
7
a branch history, annotate files, perform searches... all the usual things.
9
This is a TurboGears (http://www.turbogears.org) project. It can be
10
started by running the 'start-loggerhead.py' script.
12
If you're not familiar with turbogears, the easiest way to get this script
13
started is to run it via::
15
$ nohup ./start-loggerhead.py &
17
and add the following lines to your apache configuration::
67
19
<Location "/branches/">
68
20
ProxyPass http://127.0.0.1:8080/
69
21
ProxyPassReverse http://127.0.0.1:8080/
77
To speed up the display of the changelog view for large trees,
78
loggerhead can be configured to cache the files changes between
79
revisions. Set the 'cachepath' value in the config file.
24
The port configuration is in "dev.cfg".
26
The config file is "loggerhead.conf". In there, you can configure projects,
27
and branches per project. The idea is that you could be publishing several
28
(possibly unrelated) projects through the same loggerhead instance, and
29
several branches for the same project.
35
To speed up most operations, loggerhead will start creating two caches per
36
branch when it first launches:
38
- a revision data cache
39
- a text searching cache
41
You can put the cache folder anywhere, but I find that a folder under
42
the branch's .bzr/ folder is the simplest place.
44
The caches for a branch with 10,000 revisions take about 15 minutes each
45
on my machine, but YMMV. Once they are built, they update every six hours
46
or so but usually finish quickly (or instantly) after the initial creation.
47
Until the revision cache is built, all operations will be slow.
49
You may update the bazaar branch at any time (for example, from a cron).
50
Loggerhead will notice and refresh, and bazaar uses its own branch locking
51
to prevent corruption.
85
Loggerhead is loosely based on bazaar-webserve, which was loosely
86
based on hgweb. Discussion should take place on the bazaar-dev
87
mailing list at bazaar@lists.canonical.com. You can join the list at
88
<https://lists.ubuntu.com/mailman/listinfo/bazaar>. You don't need to
89
subscribe to post, but your first post will be held briefly for manual
92
Bugs are tracked on Launchpad; start at:
94
https://bugs.launchpad.net/loggerhead
57
This is loosely based on bazaar-webserve, which was loosely based on hgweb.
58
Discussion should take place on the bazaar-dev mailing list.
added
removed
README.txt
